45 views
Classic Bronze Valve Guide Liners Cylinder Head Engine Reconditioning
$250
New box of 500 Classic bronze valve guide liners 9mm. Other sizes available.
- Date Listed:01/03/2024
- Last Edited:01/03/2024
- Condition:New
Similar Ads
- Fully 6 12 Port Cylinder Head 149,161,173,179,186, 202 HoldenRemember those “Yellow” heads from the old days? The new millennium is here and our heads are FULLY SIX. Remanufactured to the original “Yellow” specifications plus improvements! Brought to you by one of the legendary cylinder head companies, HSD CYLINDER HEADS. REMANUFACTURED HEADS FOR RED MOTORS All new parts not reused old bits including valves, heavy duty springs, chromoly retainers, hardened machined locks and viton seals • Chemically cleaned • Crack tested • K-LINE valve guides.$1,650Moorabbin, VIC•39w
- Fully 6 Bathurst spec 6 Cylinder Head 149,161,173,179,186, 202 HoldenHSD's Fully 6 lineup includes the Bathurst head. These heads are our fast road mainly set up for a solid cam application, using all the same cutters and hardware as our Fully 6 head so they are all using HSD's custom profiled 1.680 inlet and 1.440 exhaust valves, the exact same port sizing on the Inlet which is 37x58mm keeping the port size down to not slow down airspeed and keep as much torque in them as possible. These heads flow around 175 cfm@ .500" valve lift, at 28". (approx. 270hp pot$2,500Moorabbin, VIC•39w
- Fully 6 BARRA Ford cylinder head BA, BF, FGThe new FULLY 6 Barra hitting our line-up of changeover performance heads. These heads are done to our Fully 6 formula which is: *Oversize stainless steel valves intake and exhaust *4 angle seat job on the intake and radius on the exhaust *Oversized valve throats *Mild Port job *New heavy duty spring kit with chromoly retainers *Completely reconditioned with chemical cleaning, crack testing, valve guides, stem seals, a finished surfaced assembled head ready to be bolted on. We$2,800Moorabbin, VIC•39w
- Fully 6 Cylinder Head 149,161,173,179,186, 202 HoldenRemember those “Yellow” heads from the old days? The new millennium is here and our heads are FULLY SIX. Remanufactured to the original “Yellow” specifications plus improvements!Brought to you by one of the legendary cylinder head companies, HSD CYLINDER HEADS. All heads are stripped chemically cleaned, washed, inspected and crack tested before being modified. All brand-new parts including valves, springs, moly retainers, hardened locks and positive seals. K-LINE valve guides.$1,650Moorabbin, VIC•72w
- Fully 6 Road Racer aluminium Holden 6Well here we have teamed up with Yella Terra by using their aluminium Road Racer head and giving it a Fully 6 touch. We use all our own parts in these and port them giving a nice 15% increase in cfm over their already improved casting (which all up is nearly 50% better over a stock 12 port). Orders are limited and out of our control as we rely on what Yella Terra have in stock. So if you are interested in getting one of these heads please get in contact with us so we can work something out$3,600Moorabbin, VIC•71w
- HOLDEN V8 Cylinder Heads 253-308HSD RTM Eliminator (or Neville 8's) We have been modifying Holden V8 heads since the beginning and involved in their development through the years, every Blue Meanie VK had a pair of our heads, along with a lot of teams in the Group A and C using our heads. These heads are done to a specific formula *Chemically cleaned and crack tested *New guides *4 angle valve seats *Race throats *Oversize L34 size valves *Group C spec machining *Basic port job *Heavy duty spring kit chr$2,200Moorabbin, VIC•29w
- HOLDEN Grey Motor Cylinder HeadsThese heads are an excellent upgrade for your mighty little grey motor and will be capable of anything you throw at it with quite a few of these heads being on some quite respectable street and race cars. They handle any solid flat tappet camshaft you can fit in a grey, and although the ports look big they are no bigger than the locator rings in a factory head so your manifolds will all work with it (we can also dowel your manifold if you bring it in) and if you want more there is still lot$2,200Moorabbin, VIC•29w
- IRVING Holden Head 202, 186, 179HSD IRVING You heard right the IRVING cylinder head is back in production we have been teasing with the idea for many years (over 6 since thefirst few photos) with posts here and there of us working and modifying some old castings. These new IRVINGS are brand new castings new aluminium new technology new tricks…. Leave those old cast iron heads behind and make your Holden six a real fire breathing rocket that would even scare the V8 boys. These heads bolt onto your Holden 6 without any mo$5,500Moorabbin, VIC•72w
- Holden 308 304 FULL Short Reco V8Can fully reco long V8 motor made to run on unleaded with hot tanking block, Top Quality machining Bore & Hone, Deck block, Crank grind, new cam bearings, Top Quality Parts fit cam bearings, fit pistons to rods LOOK .QUALITY Hypatec pistons with molly rings NOT RUBBISH (Extra $), King bearing set, Or with RACE flat tops extra $350. Also general headwork available basic reco $250 Each head. Please note: picture indicates quality of work & parts. Engine Reconditioning Accredited Assembled includ$4,000Cheltenham, VIC•440w
- GR Yaris G16E Cylinder HeadGR Yaris G16E cylinder head Brand new cylinder head, we were asked to develop the head to improve low lift figures without hurting airspeed. A fair bit of time tied up in doing so re creating valve profiles etc. Has light port work to suit, custom in house made oversize valves and head is machined to suit oversize valves. Also comes with a Kelford beehive spring package and titanium retainers. Valve sizes are 1mm inlet and 2mm exhaust Head is at HSD cylinder heads in Moorabbin$4,500Moorabbin, VIC•42w
- Crane Cams Chev Distributor GearCrane Steel Distributor Gears Crane Cams offers a variety of precision-machined, steel distributor gears for people using steel roller camshafts. These steel distributor gears feature a modern heat-treating and manufacturing process that makes them compatible with steel cams. Roller cams are made of either induction-hardened or carburized steel. Neither of these materials is compatible with the stock distributor gears. In the past, bronze distributor gears were used, but for street applications$150Moorabbin, VIC•4w
- Nokia CK-7W car kitNew in unopened box. Nokia CK-7W$80Moorabbin, VIC•4w
- Small Block Chev Clevite 400 Main Bearings STD H-seriesNew only opened plastic to take picture. Clevite Performance H-series bearings suit 400 Chev main STD journal.$80Moorabbin, VIC•4w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8898