383 views
Mill Drill Hafco Metalmaster Model HM-46B
$3,975 Negotiable
Brand New MILL DRILL with DRO and Tooling. Hafco Model HM-46B. Very competitively priced.
HM-46B - Mill Drill - Geared & Tilting Head Table Travel: (X) - 485mm (Y) - 175mm (Z) - 430mm
Includes Dovetail Column
The HM-46B milling machines has 6-speeds 95-1650rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out on different angles. In addition the milling head is also mounted to a vertical dovetail slide system that allows the head to maintain on the exact same centre position when raising or lowering.
The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling. The motor is controlled by a separate forward and reverse on/off button switches. There is a heavy-duty steel stand included, supporting the weight of the machine.
Gear driven head 6 speeds. Dovetail vertical Z-axis
Mill head tilts to ±90º from vertical with digital display
Large 730 x 210mm groundwork table with T-slots
Adjustable leadscrew nuts eliminating backlash on both axis.
Fine feed hand wheel operating quill feed. Forward and reverse on/off button switches.
3MT spindle with 75mm diameter quill.
Adjustable table and drill length stops. Rack and pinion wind-up head'.
Rear slide-way cover and slide clamps on all axis. Spindle lock for quill.
Table lock on both axis. Metric dial graduations @ 0.05mm for X & Y axis
Includes
Drill chuck & Arbor. Face cutter & Arbor. Safety cutter guard. 3-2MT sleeve.
M12 drawbar. 1/2" x 12tpi Whitworth drawbar
Collet & Chuck Set ER32 x MT3
16 mm Keyless Drill Chuck
Clamp Kit M12 for 14 mm Slot.
10 Piece Metric End Mill Set
5" Machine Vice - Swivel Vertex
HM-46B - Mill Drill - Geared & Tilting Head Table Travel: (X) - 485mm (Y) - 175mm (Z) - 430mm
Includes Dovetail Column
The HM-46B milling machines has 6-speeds 95-1650rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out on different angles. In addition the milling head is also mounted to a vertical dovetail slide system that allows the head to maintain on the exact same centre position when raising or lowering.
The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling. The motor is controlled by a separate forward and reverse on/off button switches. There is a heavy-duty steel stand included, supporting the weight of the machine.
Gear driven head 6 speeds. Dovetail vertical Z-axis
Mill head tilts to ±90º from vertical with digital display
Large 730 x 210mm groundwork table with T-slots
Adjustable leadscrew nuts eliminating backlash on both axis.
Fine feed hand wheel operating quill feed. Forward and reverse on/off button switches.
3MT spindle with 75mm diameter quill.
Adjustable table and drill length stops. Rack and pinion wind-up head'.
Rear slide-way cover and slide clamps on all axis. Spindle lock for quill.
Table lock on both axis. Metric dial graduations @ 0.05mm for X & Y axis
Includes
Drill chuck & Arbor. Face cutter & Arbor. Safety cutter guard. 3-2MT sleeve.
M12 drawbar. 1/2" x 12tpi Whitworth drawbar
Collet & Chuck Set ER32 x MT3
16 mm Keyless Drill Chuck
Clamp Kit M12 for 14 mm Slot.
10 Piece Metric End Mill Set
5" Machine Vice - Swivel Vertex
- Date Listed:11/04/2024
- Last Edited:12/04/2024
- Condition:New
- Shipping:Pickup Only
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 7523