112 views
29mm pin, 450mm Excavator & Backhoe GP Digging & Trenching Bucket
$450
The price includes GST.
Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket.
Condition is used and there is some surface rust, but is otherwise a good solid bucket, and has plenty of life left.
Current Headstock configuration:
29mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins.
202mm Pin Center to Pin Center (CtoC).
81mm Between the Ear Plates (BTE), 75mm Between the flanges of the rear pin hole bosses (but these bosses could be removed or shaved back to the 81mm Between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
The front left side pin hole (looking at the bucket as in pics# 2-4) has no bush in it so it is a 35mm diameter hole.
Shipping dimensions: 475mm Wide, 680mm Deep, 425mm High. Weight: 58kg.
Call ******** 037 if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.
(MIC#_1402AG231107015)
Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket.
Condition is used and there is some surface rust, but is otherwise a good solid bucket, and has plenty of life left.
Current Headstock configuration:
29mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins.
202mm Pin Center to Pin Center (CtoC).
81mm Between the Ear Plates (BTE), 75mm Between the flanges of the rear pin hole bosses (but these bosses could be removed or shaved back to the 81mm Between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
The front left side pin hole (looking at the bucket as in pics# 2-4) has no bush in it so it is a 35mm diameter hole.
Shipping dimensions: 475mm Wide, 680mm Deep, 425mm High. Weight: 58kg.
Call ******** 037 if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.
(MIC#_1402AG231107015)
- Date Listed:26/03/2024
- Last Edited:26/03/2024
- Condition:Used
Similar Ads
- 2024 NEW RHINOCEROS DIESEL MINI EXCAVATOR XN10-9SE2024 NEW MODEL XN10-9SE WITH EXPANDABLE TRACK (770MM-950MM) , SWING BOOM ,USA EATON WALKING MOTOR, ALL HYDRO HOSES ARE GENMAN CONTINENTAL ... THIS LISTING WITH ONE 400MM STANDARD BUCKET IF YOU NEED OTHER ATTACHMENT, CAN BE PURCHASER SEPARATELY IF YOU NEED. OR WITH FULL PACKAGE ,(200MM,400MM BUCKETS ,SPECAIL 800MM TILTING BUCKET ,hydro THUMB GRAB,RAKE,RIPPER,QUICK HITCH ,200MM AND 300MM AUGER ,TOTAL $13990 Buy from a long-term seller who is committed to serving your technology needs FOR SPA$11,990Chandler, QLD•10w
- 2024 RHINOCEROS XN17S MINI EXCAVATOR WITH YANMAR DIESEL ENGINE2024 RHINOCEROS MINI EXCAVATOR XN17S EQUIPED WITH A MOST POPULAR YANMAR 3TNV74 3 CYLINDER WATER COOL WITH HYDRAULIC OIL COOLING SYSTEM . 20.4HP AT 3600 RPM. SWING BOOM FUNCTION AS STANDARD . AND IT IS A GENUINE RHINOCEROS. THE PRICE IS FOR ONE XN17 MACHINE AND ONE 400MM DIGGING BUCKET ONLY IF YOU WANT THE COMBO PACKAGE WITH 200MM ,400MM ,1000MM BUCKETS ,RAKE,RIPPER ,ESPECIALLY HYDRO QUICK HITCH AND HYDRO THUMB GRAB . WILL BE $25990. GST INCL heavy duty 300mm auger with auger drive is $3500$22,990Chandler, QLD•10w
- 2024 NEW Rhinoceros XN12-8SE Excavator with Kubota ENGINE2024 New Upgrade Rhinoceros XN12-8SE mini excavator ,EQUIPE WITH JAPANESE MADE KUBOTA D722 3 CYLINDER WATER COOL DIESEL ENGINE, EXPANDABLE TRACK (770MM-950MM) , SWING BOOM ,Hydro thumb grab AND MORE ....... THIS LISTING IS A EXCAVATOR WITH ONE STANDARD 400MM BUCKET ONLY. IF YOU NEED A COMPLETE FULL ATTACHMENTS,INCL 200MM,400MM,850MM TILTING BICKER (MOST DEALER IS OPTIONAL ,BUT IS STANDERS FROM US) ,THUMB GRAB,RAKE,RIPPER,QUICK HITCH,AND 200MM AND 300MM AUGER.PLEASE CONTACT ME .ONLY $17990 Dis$15,990Chandler, QLD•2w
- 2024 UPGRAD RHINOCEROS XN12-9(UPGRADE) EXCAVATOR KUBOTA DIESEL ENGINE2024 NEW UPGRADE RHINOCEROS XN12-9SE JUST ARRIVED. SAME PRICE AS THE 2023 MODEL. EQUIPE WITH JAPAN MADE KUBOTA 3 CYLINDER WATER COOL DIESEL ENGINE. EXPANDABLE TRACK (770MM-950MM) ,WITH SWING BOOM , MORE QUITE, MORE STABLE. MORE ACCESSIBLE. THIS LISTING WITH ONE 350MM BUCKET ONLY , IF YOU WANT THE FULL PACKAGE ATTACHMENTS, INCL 200MM,350MM,850MM (special tilting bucket as standard now),THUMB GRAB ,RAKE,RIPPER,QUICK HITCH,AND 200MM AND 300MM AUGER WILL BE $19990 Buy from a long-term seller who$17,990Chandler, QLD•29w
- Kanga slewing front hoe for mini skid steersKanga slewing front hoe for mini skid steers – excellent condition (like new) – 300mm bucket with replaceable tiger teeth x3 – left and right slewing capability – rock grab option available (sold separately) to replace the bucket – poppet couplers (exchange for flat-face couplers will incur a small additional charge). If your jobs require trench digging and you’re not quite ready for a small excavator (logistically or in terms of cost), then a slewing front hoe for your mini skid steer is a gr$2,150Darra, QLD•3d
- Augertorque 3500 Max auger driveAugertorque 3500 Max auger drive – new – 65mm round hub – recommended flow 40-85 lpm – flat-face couplers (poppet couplers available if required) – weight 73kg – recommended for excavators 2-5 tonnes. RRP $2,879.80 inc GST Price includes GST (tax invoice supplied). This item is available in Darra (Brisbane) Qld 4076. Local delivery for an additional fee or assistance with arrangements for Australia-wide transport. SECONDHAND accessories to support the 3500 Max auger drive: - Excavator head b$2,290Darra, QLD•1w
- GP bucket 2100mm for skid steersExtreme heavy duty GP bucket for skid steers – 2100mm wide – large capacity – excellent condition – bolt-on reversible cutting edge. RRP $3,583.80 inc GST This attachment has a Universal hitch (1135mm wide) used across a range of skidsteers including Caterpillar, ASV, John Deere, Clark, Case, Kubota, Bobcat, Cougar, Terex, Gehl, Mustang, Komatsu, New Holland, Takeuchi, JCB and Volvo. Price includes GST (tax invoice provided). This item is available in Darra (Brisbane) Qld 4076. Local deliver$2,150Darra, QLD•1w
- Bucket Forks 450kg Clamp On 1200mm Lawnton WarehouseProduct Name: Bucket Forks 450kg Clamp On 1200mm Lawnton Warehouse Part No: EW-BF450KG Price: $350.00 plus GST Condition: New Stock Free Pickup at Lawnton warehouse - All prices exclusive of GST - 12 Month Factory Warranty - Overnight shipping to most locations available - Lawnton warehouse Pickup or delivery available (call for delivery quote) - Tax Invoice Provided Payment options: - Credit Cards (Visa, MasterCard and Amex Welcome (No Surcharge)) - Bank Transfer, Bpay, ZipPay Equipment Wareho$350Brisbane City, QLD•64w
- Heavy duty high dump bucket 1730mmHigh dump bucket 1730mm for skid steers – very heavy duty – excellent condition (hardly used, cutting edge corners still square, ram chromework is like new). High dump buckets are not readily available in Australia. They are however a mainstream skidsteer attachment in the USA, where numerous manufacturers contribute to a variety of high dump sizes and styles. This particular bucket came with a Bobcat skid steer imported from the USA. Their main advantage over 4in1 and standard GP buckets is$3,750Darra, QLD•2w
- Norm tilting 4in1 bucket 2050mmNorm Engineering tilting (crossflow) 4in1 bucket for skid steers – 2050mm wide – near new condition (used as demo bucket only) – heavy duty 20mm BisAlloy floor – plain edge – flat-face couplers – 0.44m3 capacity – weight 607kg. RRP $10,950 inc GST This attachment has a Universal hitch (1135mm wide) used across a range of skidsteers including Caterpillar, ASV, John Deere, Clark, Case, Kubota, Bobcat, Cougar, Terex, Gehl, Mustang, Komatsu, New Holland, Takeuchi, JCB and Volvo. Price includes G$6,950Darra, QLD•1w
- New Endress+Hauser DN300 Proline Promag W400 Electromagnetic FlowmeterPrice from Endress+Hauser Australia $13,750. The world's first electromagnetic flowmeter for unrestricted measurement. The best-performing flowmeter for all applications in water distribution as well as wastewater treatment. Made in France by Endress+Hauser. FEATURES & BENEFITS: * The first and only electromagnetic flowmeter with no inlet and outlet runs (0 x DN) as well as no pipe restriction (full-bore design) and thus no pressure loss. * Measure reliably – independent of flow profile an$4,450Pullenvale, QLD•5h
- 22-36 ton (90mm pin) Heavy Duty Excavator RipperThe price includes GST. Used, Solid, Heavy Duty Excavator Ripper, suit 22-36 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. Current Headstock configuration: 90mm Pin Diameter, 530mm CtoC (pin Center to pin center), 335mm BTE (Between The Ear plates). Should fit: Kato 1220SE2 / 1250SE / HD700SEV / HD900SEV. Maybe fit: Case CX240 / CX290, Kato HD1430, Kobelco SK220 / SK230 / SK2$3,250Pullenvale, QLD•1w
- Padfoot Drum Roller Compactor Over Smooth Shell Kit 2120mm x 1535mmPrice includes GST. Padfoot Drum Roller Compactor Over Smooth Shell Kit suit Caterpillar CS56B / CS76XT, Dynapac CA300D / CA302D / CA362D, XCMG XS123 / XS123PD, and possibly other compactor rollers with a 1535-1550mm diameter drum size. Padfoot Over Shell kits are designed to get the most out of your single drum roller by being able to change your smooth drum into a padfoot drum. Each half shell Dimensions: 2120mm wide, 1535mm Diameter (internal) to suit smooth drum external diameter of 1535$4,650Pullenvale, QLD•1w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 6649