754 views
Honda Dax70 (ST70) 1969 (Make an offer. I NEED to sell it!!)
$7,500 Negotiable
Up for sale is this beautiful & ORIGINAL Honda Dax70 (ST70).
I did get it with years of Dust n Grease on it, but it has preserved it imo.
Only 2 owners since New too!!
What I've done -
I've stripped it completely, replaced bolts if needed (x3).
Regreased bearings, pivots, etc.,
Detailed and waxed the frame (Bees wax, to preserve the Petina).
I had to spray the Rims, Mudguards and 1/2 engine.
It also has, what I think is a 1975 QLD rego/Uni parking sticker. Which I couldn't bring myself to removing. It feel it gives it Providence.
Body work -
- Rims painted (Hydro blasted first),
- Mud guards painted (had 'Pimpling' surface rust).
- Head, Block and cases painted, everything else Original.
The engine -
- Full top end rebuild (New OEM Piston & Rings, Bore was Honed, Valves reseated
and head rebuilt and setup by HeadFix bayswater).
- New spark plug,
- New Clutch,
- New OEM gasket kit,
- Carby rebuilt and Fine Tuned,
- New OEM Ignition module,
- New OEM coil,
- New Original Honda air filter,
- Tyres are in almost New condition (possibly original tyres),
- New Tubes,
- All lights work,
- Original Factory key.
I don't want to sell it, but how many things does a person need....?
NO Time wasters, NO LOW BALLERS and ONLY Serious buyers only please.
If you need to know anything else, send me a msg.
Cheers n Have a Great Day.
#st70 #Dax70 #ct70 #Trail 70 #Honda #MiniBike #z50 #kv75 #vintage #atc #pitbike #classic #monkey bike
I did get it with years of Dust n Grease on it, but it has preserved it imo.
Only 2 owners since New too!!
What I've done -
I've stripped it completely, replaced bolts if needed (x3).
Regreased bearings, pivots, etc.,
Detailed and waxed the frame (Bees wax, to preserve the Petina).
I had to spray the Rims, Mudguards and 1/2 engine.
It also has, what I think is a 1975 QLD rego/Uni parking sticker. Which I couldn't bring myself to removing. It feel it gives it Providence.
Body work -
- Rims painted (Hydro blasted first),
- Mud guards painted (had 'Pimpling' surface rust).
- Head, Block and cases painted, everything else Original.
The engine -
- Full top end rebuild (New OEM Piston & Rings, Bore was Honed, Valves reseated
and head rebuilt and setup by HeadFix bayswater).
- New spark plug,
- New Clutch,
- New OEM gasket kit,
- Carby rebuilt and Fine Tuned,
- New OEM Ignition module,
- New OEM coil,
- New Original Honda air filter,
- Tyres are in almost New condition (possibly original tyres),
- New Tubes,
- All lights work,
- Original Factory key.
I don't want to sell it, but how many things does a person need....?
NO Time wasters, NO LOW BALLERS and ONLY Serious buyers only please.
If you need to know anything else, send me a msg.
Cheers n Have a Great Day.
#st70 #Dax70 #ct70 #Trail 70 #Honda #MiniBike #z50 #kv75 #vintage #atc #pitbike #classic #monkey bike
- Date Listed:06/03/2024
- Last Edited:17/04/2024
- KMs:3983
- Learner Approved:Yes
- Year:1969
- Listing Type:Private seller
- Displacement (cc):70
- Model:CT70
- Make:Honda
- Registered:No
- Colour:Blue
Similar Ads
- Honda CRF250X, 2008
- 250 cc
- Learner Approved
2008 Honda CRF250X. This bike is the nuts guts for starters in the bush. Rec REG. Always maintained, starts very easy, heaps of power for a 250 four stroke, ever reliable and will get you up any gnarly hill. Its pretty stock apart from Force Radiator guards, Bark Busters and a CRF Racing bash plate. Currently Rec Registered so no road worthy required on changeover. If the ad is up its still available. All messages asking "Is this still available" or asking if i'll sell for a low ball offer will$3,200NegotiableBrookfield, VIC•36w - Braaap ST250 Shadow Cafe Racer
- 250 cc
- Learner Approved
2021 Shadow Café Rafer from Braaap (250cc) This bike had been a great little runner as my first bike and I have loved riding it around as a learner and on my P’s. I am only selling now as I am moving interstate and unfortunately the bike can’t come with me. It has been a great little street bike for beating the traffic around Melbourne and since I have upgraded the gearing sprocket and put in a larger carby it will handle the highways now too with a max speed of around 120km p/h. It has saved m$1,800NegotiableMoonee Ponds, VIC•1w - Awesome custom cafe racer Honda cb250 motorbike
- 250 cc
- Learner Approved
$2900 with RWC This is THE motorcycle. An amazing cafe racer / scrambler with a custom metal flake / glitter gold paint job, professionally done. (This Ed Roth rat fink styles). The gold / brown leather has a really cool 70s vibe. This motorbike would make an amazing cruiser, neighborhood racer or commuter. Perfect for this summer weather. Would also suit a learner or new rider, or a second bike or project Bike has brand new tyres and brand new shocks. Runs well Pickup in FITZROY Melbourne$2,400NegotiableCollingwood, VIC•9w - 2002 Honda XR250R dirt bike
- 250 cc
- 1 km
Bike has Wolf 3D map unit with toggle switch, Wiseco high compression piston, extended swing arm, Boss bash plate, Ego bark busters, One Industries seat cover & tyres in good condition. Oil change and valve adjustment both done earlier this year. Carb cleaned & spark plug replaced late last year. Needs a bit of love, but mechanically the bike is rock solid. The XRs are well regarded for their reliability and this one is no exception. Bike is sold as is, and sale includes a box of parts inclu$2,900Epping, VIC•6d - 2019 Honda CRF110f bike
- 110 cc
- 200 km
A few minor scuff marks but otherwise in excellent condition. Ridden for less than 100 hours. My kids have outgrown this bike so time to sell. Runs well, serviced about 20 riding hours ago. Don't message me asking to swap for your junk. No low-ball offers.$2,400NegotiableNorth Warrandyte, VIC•1w - 1972 BMW R50/5 Chrome Toaster Tank Motorcycle, short wheelbase
- 500 cc
- Learner Approved
1972 BMW R50/5 Chrome Toaster Tank Motorcycle, short wheelbase After 24 years of ownership (purchased April, 2000 in British Columbia, Canada) I’m selling my ‘toaster tanker’ 1972 BMW R50/5. Bike was registered in BC from 1972 until bringing it with me to Australia in 2016. We are moving back to Canada. I wish to sell this to someone who appreciates this classic motorcycle. The /5s were the first bikes (R50, 60 & 75) produced at BMW’s new Spandau Berlin factory (opened in 1969 - with governm$17,500Bayswater, VIC•1w - HONDA CBR 250R
- 250 cc
- Learner Approved
It's time to part ways with my beloved Honda CBR 250R. This bike has been my pride and joy, but I need to make space for new adventures. With just 2723 kilometers on the clock, it's practically brand new and ready to hit the road with you. Priced at $4999, this CBR 250R is the lowest KM bike i could find anywhere. It's LAMS approved, with mostly OEM parts and a few custom upgrades like the Gipro gear indicator and crash bumpers. It's been my faithful ride for years, but now it's your turn to t$4,999Mulgrave, VIC•4w - HONDA CBR 250R ABS
- 250 cc
- Learner Approved
It's time to part ways with my beloved Honda CBR 250R. This bike has been my pride and joy, but I need to make space for new adventures. With just 2723 kilometers on the clock, it's practically brand new and ready to hit the road with you. Priced at $4999, this CBR 250R is the lowest KM bike i could find anywhere. It's LAMS approved, with mostly OEM parts and a few custom upgrades like the Gipro gear indicator and crash bumpers. It's been my faithful ride for years, but now it's your turn to t$3,399.99Mulgrave, VIC•1w - Honda Shadow Motor Bike
- 450 cc
- Learner Approved
This bike is in great condition, no registration as it ran out, new battery and goes really well, saddle bags and screen Details With the advent of the Learner Approved Motorcycle Scheme, in some Australia states, learners now have a much broader choice of machine to welcome them into the wonderful world of motorcycling. Honda offers the most choice to newcomers with no fewer than six LAMS machines in its armoury without even taking into account scooters or dirtbikes. The elegant CB400 Supe$4,800NegotiableBlairgowrie, VIC•4w - 1973 Honda CB750
- 750 cc
- 30000 km
US Import 1973 CB750K3 Imported 5 years ago, was registered on club reg for a year but been laid up since Was getting it ready for full rego but lost interest Unrestored, Mechanically sound, engine has never been apart as far as I can tell Done 30,xxx miles according to the speedo it was imported with Tank has been sealed and clear coated Carbs been cleaned and kitted but needs to be tuned as its not perfect All mechanical parts (wheel bearings, headstem, chain/sprockets ect.) Done with first$7,500NegotiableBelgrave, VIC•1w
More from this seller
- MAZDA 626/CAPELLA 79-82 Front Bumper (UB71 50 064)Front bumper for a Mazda 626 late 70's (78-80??) I saved it many years ago from landfill, with the intention of passing it on to someone that needs it. I need the space now. It is how it is. No major bumps/bends/scratches. Please call/contact for more info, or to educate me on the exact model. Cheers, Sean$150NegotiableRingwood East, VIC•108w
- Tail Lights (x2 Chrome) Pajero 2003Up for sale are a Pair of Tail Lights from a 2003 Pajero. I bought these lights thinking they would fit my Exceed, but have the different Bumper-Light combo. Bought from a local wreckers and just want to clear space in the garage. NO Cracks or major scratches and are in Very Good RWC. (No wiring or globes, just the tail lights) Cheers$70Ringwood East, VIC•141w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 084