0 views
2inch Front Spacer & Shackles Mitsubishi Triton MQ/MR 15-22
$383.99
2" Front Spacer & Shackles Mitsubishi Triton MQ/MR 15-22 (Online Only)
The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time.
Included:
2 x Rear Shackles w/ Greasable Pins
2 x Front 35mm Shock Spacers
Nuts for spacers
Fitment:
Mitsubishi Triton MQ/MR
Year: *****2022
Description:
Greasable Shackle
It will be a much smooth ride on or off road as the shackles are able to move with the leaf spring giving a much more linear stress reduced suspension action.
Greasable pins are used to ensure a comfortable ride that also accepts standard bushes.
The greasable pins are pressed and then welded in to stop them from working loose and wearing the shackles plates.
The greasable nipples are encapsulated in the nut to avoid being damaged off road.
All extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened, resulting in deformation of the bushings.
These shackles will give you approximately 2" inch ( 45-48 mm ) of extra lift due to the fact that you are raising just one end of the spring.
These spacers are 35 mm thick and will lift the front of your car around 2.5"-2.8" inch ( 64-68 mm ).
The spacers pictured are thicker for a bigger lift. The 35 mm spacers fit on top of your strut top using the original studs and nuts. No studs of nuts are supplied with this kit as they are not needed.
The lift spacer is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer.
About this product:
100% Brand New
Top quality extended shackles suitable for vehicles engineered to the highest standard. Will provide approximately 2" inch ( 45-48 mm ) of lift.
You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 Vehicles have.
How to Pay Us:
Please choose a payment method and supply your correct address and contact details and we will arrange delivery and provide you with your tracking number etc.
We accept all payments made via PayPal, Zip Pay, After Pay, Humm, Credit Cards, Bank Transfers & Direct Deposits.
DISCLAIMER:
OZI4X4 AUSTRALIA STRONGLY ADVICE THAT A PROFESSIONAL SHOULD INSTALL ANY OF THE ACCESSORIES THAT IS PURCHASE FROM US, WE ARE NOT LIABLE FOR ANY DAMAGE THAT MAY OCCUR DURING INSTALLATION AND FREIGHT OF THE ITEM. WE OFFER PROFESSIONAL INSTALLATION TO MOST OF THE ACCESSORIES SOLD BY US AT OUR SHOP. FOR BOOKING AND QUOTATIONS OF INSTALLATION FEES PLEASE CONTACT US.
Australia’s Biggest Bullbar Wholesaler Located In Sydney
The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time.
Included:
2 x Rear Shackles w/ Greasable Pins
2 x Front 35mm Shock Spacers
Nuts for spacers
Fitment:
Mitsubishi Triton MQ/MR
Year: *****2022
Description:
Greasable Shackle
It will be a much smooth ride on or off road as the shackles are able to move with the leaf spring giving a much more linear stress reduced suspension action.
Greasable pins are used to ensure a comfortable ride that also accepts standard bushes.
The greasable pins are pressed and then welded in to stop them from working loose and wearing the shackles plates.
The greasable nipples are encapsulated in the nut to avoid being damaged off road.
All extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened, resulting in deformation of the bushings.
These shackles will give you approximately 2" inch ( 45-48 mm ) of extra lift due to the fact that you are raising just one end of the spring.
These spacers are 35 mm thick and will lift the front of your car around 2.5"-2.8" inch ( 64-68 mm ).
The spacers pictured are thicker for a bigger lift. The 35 mm spacers fit on top of your strut top using the original studs and nuts. No studs of nuts are supplied with this kit as they are not needed.
The lift spacer is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer.
About this product:
100% Brand New
Top quality extended shackles suitable for vehicles engineered to the highest standard. Will provide approximately 2" inch ( 45-48 mm ) of lift.
You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 Vehicles have.
How to Pay Us:
Please choose a payment method and supply your correct address and contact details and we will arrange delivery and provide you with your tracking number etc.
We accept all payments made via PayPal, Zip Pay, After Pay, Humm, Credit Cards, Bank Transfers & Direct Deposits.
DISCLAIMER:
OZI4X4 AUSTRALIA STRONGLY ADVICE THAT A PROFESSIONAL SHOULD INSTALL ANY OF THE ACCESSORIES THAT IS PURCHASE FROM US, WE ARE NOT LIABLE FOR ANY DAMAGE THAT MAY OCCUR DURING INSTALLATION AND FREIGHT OF THE ITEM. WE OFFER PROFESSIONAL INSTALLATION TO MOST OF THE ACCESSORIES SOLD BY US AT OUR SHOP. FOR BOOKING AND QUOTATIONS OF INSTALLATION FEES PLEASE CONTACT US.
Australia’s Biggest Bullbar Wholesaler Located In Sydney
- Date Listed:19/06/2023
- Last Edited:19/06/2023
- Condition:New
- Warranty:Yes
Similar Ads
- Nudge Bar With LED light Bumper Guard for UTE SUV S/S or BlackBCauto Unit 7, 165 Canterbury Rd, Bankstown NSW 2200 For Sydney local customers, Available Pick up Time is 10AM-4PM Closed on Sunday and public holidays For other area customers require postage options, please visit https://bcautosydney.com.au/ Feel free to send us a message or email if you have any questions Email: Product: Nudge Bar Steel Grille Bumper Guard With built in 100W LED light in the middle bar Avilable Models AS BELOW, GWM Cannon 2020-2$400Bankstown, NSW•351w
- MY15-MY22 Mitsubishi Triton MQ MR SINGLE CAB Weather Shields LogoGreat Quality Weather Shields, made specially for******2022 MQ MR model Mitsubishi Triton SINGLE CAB ONLY. AU Seller located in Sydney Metropolitan Area. 100% REAL demonstration photos, NO any amendments by photoshop software. Which means 100% REAL products in front of you. Written Custom Descriptions Below: Installation Tips: Clean the surface to remove all contaminations visible before installing. Use a file cleaner or finger nail to easily peel the red protective liner off$60Blacktown, NSW•109w
- MITSUBISHI TRITON ML MN (*****2014) 2'' LIFTKIT FRONT & REAR SPACERSMTR-MN-SP1466-S FRONT STRUT SPACERS X 2 Strengthened T6 Aluminium Spacers Anodised RED Spacers are 32mm thick and lifts the car approx 2inch or 45-50mm Spacers sit on top of strut top Can we used to lift the vehicle or just level out the vehicle if it sit higher or lower front to rear Easy Install Designed & Manufactured to Meet Australian Design Rules Please call or email us for discounted prices on items and postage when buying two (2) or more products from us REAR SHACKLES X 2 Stre$249St Marys, NSW•129w
- TOWBAR TO SUIT MITSUBISHI TRITON MQ MR (05/2015 2023) XR RECOVERYPart No.:MTR-XR-TB1666-S Brand-New Heavy-Duty Tow bar for Mitsubishi Triton MQ MR (05/2015 – 2023) XR RECOVERY Designed & Manufactured to Meet Australian Design Rules 65mm x 65mm Extreme Duty Reinforced Crossbar Two WLL 4000kg Load-Rated Recovery Points integrated into our 3-Piece Design side-arms with bevelled edges to suit soft shackles. Flush chassis-mounted profile for maximum offroad clearance for improved departure angles. Highly durable, textured Extreme Duty Powder Coated Finish ($1,125St Marys, NSW•40w
- MITSUBISHI TRITON RIGHT FRONT DRIVESHAFT, MQ-MR, 03/15- (C34546)We have for sale a good used RIGHT FRONT DRIVESHAFT to suit MITSUBISHI TRITON, MQ-MR, 03/15- DISCLAIMER: If you require confirmation that this item will fit for your car please message us with your 17 Digit Vin number so we can verify that for you. COMES WITH 12 MONTH UNLIMITED KM WARRANTY Model: TRITON 2021 Year: 2021 Stock Number: C34546 Tag JJ Reference Number: 0000704846 OEM NUMBER OF THIS UNIT MITSUBISHI TRITON RIGHT FRONT DRIVESHAFT, MQ-MR, 03/15- VIN: MMAWJKL10NH005946 Int$125NegotiableLansvale, NSW•1w
- MY15-MY23 Mitsubishi Triton MQ MR Dual Cab Weather Shields Black LogoGreat Quality Weather Shield, made specially for******2021 MQ MR model Mitsubishi Triton dual cab. AU Seller located in Sydney Metropolitan Area. 100% REAL demonstration photos, NO any amendments by photoshop software. Which means 100% REAL products in front of you. Written Custom Descriptions Below: Installation Tips: Clean the surface to remove all contaminations visible before installing. Use a file cleaner or finger nail to easily peel the red protective liner off of the$65Blacktown, NSW•129w
- Nudge Bar with 125kg Complianced H-Rack for Mitsubishi Triton '18- '22Suitable for Mitsubishi Triton MR Series (Model Years: 2018 to 2022) NOTE: May not be compatible with front parking sensors. Ask us to check! This batch has grinding blemishes during manufacturing resulting in slight <10mm marks along the bar prior to powder coating. Please note this will not affect the integrity of the bar. Priced accordingly. SKU: 36432-36434-36438_MR Please check here for suitability. eBay's compatibility list may have some discrepancies as they organise vehicl$689Prestons, NSW•93w
- MITSUBISHI TRITON RIGHT FRONT SEAT, 03/15- (C34546)We have for sale a good used RIGHT FRONT SEAT to suit MITSUBISHI TRITON, MQ-MR, CLOTH, BLACK/GREY, GLX/GLX ADAS/GLX+, 03/15- DISCLAIMER: If you require confirmation that this item will fit for your car please message us with your 17 Digit Vin number so we can verify that for you. Model: TRITON 2021 Year: 2021 Stock Number: C34546 Tag JJ Reference Number: 0000704847 OEM NUMBER OF THIS UNIT MITSUBISHI TRITON RIGHT FRONT SEAT, MQ-MR, CLOTH, BLACK/GREY, GLX/GLX ADAS/GLX+, 03/15- VIN: MM$500NegotiableLansvale, NSW•1w
- MITSUBISHI TRITON LEFT FRONT CALIPER, 03/15- (C34546)We have for sale a good used LEFT FRONT CALIPER to suit MITSUBISHI TRITON, MQ-MR, 294mm DISC, 03/15- DISCLAIMER: If you require confirmation that this item will fit for your car please message us with your 17 Digit Vin number so we can verify that for you. COMES WITH 12 MONTH UNLIMITED KM WARRANTY Model: TRITON 2021 Year: 2021 Stock Number: C34546 Tag JJ Reference Number: 0000704851 OEM NUMBER OF THIS UNIT 4605A201 MITSUBISHI TRITON LEFT FRONT CALIPER, MQ-MR, 294mm DISC, 03/15- VIN:$78NegotiableLansvale, NSW•1w
- *****2023 MITSUBISHI TRITON MQ-MR 4N15 2.4L TURBO DIESEL ENGINE COVER03/2015- MITSUBISHI TRITON MQ-MR 4N15 2.4L TURBO DIESEL ENGINE DRESS COVER SUIT MITSUBISHI TRITON MQ-MR******2016******2018******2020******2022 2023 REFER IMAGES $110 pickup Can be freighted Australia Wide at Buyers Expense PARTS CENTRAL Gate 3, 125 Fourth Ave, Corner Seventh Ave, Austral NSW 2179 Phone ********9516 Email Trading Hours Monday to Friday 9am to 5pm Weekends CLOSED Public Holidays CLOSED$110Austral, NSW•47w
- Amazon Tub Canopy (Gen 3) Storage Unit Passenger Side + Free Cook TopAMAZON TUB CANOPY (GEN 3) STORAGE UNIT + FREE COOK TOP LIMITED EDITION PASSENGER SIDE The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time. WATCH THE VIDEO Included: 1 x Storage + Bench Fitment: Amazon Tub Canopy (Gen 3) Passenger Side Vehicles Fitment: Suitable For Toyota Hilux 2005 - 2022 Ford ranger 2011 - 2022 Nissan NP300 - 2015 - 2022 Volskawgon Amarok GWM Cannon LDV T60 Isuzu Dmax Holden Colorado Doe$949Gregory Hills, NSW•6d
- Canopy Drawer Unit Twin 1340W x 470L x 300H (1340 Two Drawer)DIMENSION 1340W X 470L X 300H HEIGH 2.5MM ALUMINIUM ( 1340 TWO DRAWER) The accessories at OZI4x4 are designed and manufactured to ensure a perfect fit and optimal performance, every single time. Fitment : All Canopys Included: 1 x Drawer Unit 2 x Draws Description: Overall dimensions: 1340W x 470L x 3000H Internal drawer dimensions: 560W x 400L x175H (100mm includes space between drawers) This drawer unit fits inside our Premium Canopy 2.5 Aluminium Raw Aluminium SKU: ITEM-5-DRP1342-PI029$784.99Gregory Hills, NSW•6d
- Safari Bullbar Suitable for Toyota Hilux******2022HEAVY DUTY SAFARI BULLBAR SUITABLE FOR TOYOTA HILUX SR & SR5 YEAR: 2020 - 2022 The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time. Included: 1 Safari Bullbar Nuts & Bolts 3 Skid Plates Fitment: Suitable for Toyota Hilux SR & SR5 Year: 2020 – 2022 Description: Steel Bullbar Will Require To Cut Original Grill to Suit Bullbar No Template Included -Black Powder Coated Finish Gloss Black Three Antenna Mounts W$1,299Smithfield, NSW•6d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 494