177 views
HardieFire Mineral rockwool Insulation
$160
HARDIEFIRE INSULATION (ROCKWOOL)
HardieFireTM insulation is specifically designed for use in fire applications with HardieSmartTM systems. Please refer to the current respective HardieSmartTM systems design guide for more information including installation and suitability
A high density fire, acoustic and thermal insulation for use with HardieSmart™ wall systems. This product complies with AS/NZS 4859.1:2002 including Amendment 1 – Materials for the Thermal Insulation of Buildings.
Storage and handling
HardieFireTM insulation should be stored in an internal dry area, out of direct sunlight and not exposed to chemicals. James HardieTM products must not be installed during an electrical storm and must be installed in a dry state to a dry surface and protected from weather during transport and storage. HardieFire™ insulation has not been designed to withstand prolonged direct exposure to the exterior elements. Ensure that the insulation is completely dry prior to Installation.
Safe working practices
Keep exposure to a minimum and minimise quantities kept in work areas. Avoid contact with eyes. When handling and installing Hardiefire™ insulation, to prevent irritation ensure to wear: • Safety goggles/glasses conforming to AS/NZS 1336,
• Protective clothing such as gloves and long sleeve shirts and trousers,
• P1 or P2 respirators.
CAUTIONS: ELECTRIC CABLES AND EQUIPMENT PARTIALLY OR COMPLETELY SURROUNDED WITH BULK THERMAL INSULATION MAY OVERHEAT AND FAIL. FOR INFORMATION REGARDING THE INSTALLATION OF THERMAL INSULATION IN DWELLINGS, PLEASE REFER TO THE FOLLOWING AUSTRALIAN STANDARDS: I. AS******1992: Thermal Insulation of dwellings – Bulk Insulation, Installation requirements II. AS 3000: Electrical Installations – buildings, structures and premises
BEFORE INSTALLATION
• You must turn the mains power ‘Off’ before entering the work space. If in doubt, you must consult a licensed electrician. • Care and safety measures must be followed when working in areas that contain live electrical wiring. • Defective electrical cables, terminals or any other electrical wiring must be repaired by the relevant specialist prior to installation. • Ensure the workspace has adequate and ample ventilation. If working in confined spaces, it is recommended to use a HEPA vacuum or other suitable dust extractors. • Before entering the workspace, complete a risk assessment inspection to identify hazards including but not limited to electrical, site access and ventilation.
INSTALLATION TIPS
• When placing HardieFire™ insulation inside the wall stud bays, ensure a minimum 5mm compression along sides is maintained.
• If cutting is required, please allow 5mm in addition to the required dimension to achieve above compression. CUTTING It is recommended to cut outdoors. If cutting indoors, please ensure that workspace is properly ventilated or HEPA vacuums/dust extractors are used. 1. Position cutting station so wind will blow dust away from the user or others in working area.
CUTTING
It is recommended to cut outdoors. If cutting indoors, please ensure that workspace is properly ventilated or HEPA vacuums/dust extractors are used. 1. Position cutting station so wind will blow dust away from the user or others in working area.
Product warranty
HardieFire™ insulation has a 10-year manufacturing warranty when used with HardieSmart™ systems. For terms and conditions of product warranty.
HardieFireTM insulation is specifically designed for use in fire applications with HardieSmartTM systems. Please refer to the current respective HardieSmartTM systems design guide for more information including installation and suitability
A high density fire, acoustic and thermal insulation for use with HardieSmart™ wall systems. This product complies with AS/NZS 4859.1:2002 including Amendment 1 – Materials for the Thermal Insulation of Buildings.
Storage and handling
HardieFireTM insulation should be stored in an internal dry area, out of direct sunlight and not exposed to chemicals. James HardieTM products must not be installed during an electrical storm and must be installed in a dry state to a dry surface and protected from weather during transport and storage. HardieFire™ insulation has not been designed to withstand prolonged direct exposure to the exterior elements. Ensure that the insulation is completely dry prior to Installation.
Safe working practices
Keep exposure to a minimum and minimise quantities kept in work areas. Avoid contact with eyes. When handling and installing Hardiefire™ insulation, to prevent irritation ensure to wear: • Safety goggles/glasses conforming to AS/NZS 1336,
• Protective clothing such as gloves and long sleeve shirts and trousers,
• P1 or P2 respirators.
CAUTIONS: ELECTRIC CABLES AND EQUIPMENT PARTIALLY OR COMPLETELY SURROUNDED WITH BULK THERMAL INSULATION MAY OVERHEAT AND FAIL. FOR INFORMATION REGARDING THE INSTALLATION OF THERMAL INSULATION IN DWELLINGS, PLEASE REFER TO THE FOLLOWING AUSTRALIAN STANDARDS: I. AS******1992: Thermal Insulation of dwellings – Bulk Insulation, Installation requirements II. AS 3000: Electrical Installations – buildings, structures and premises
BEFORE INSTALLATION
• You must turn the mains power ‘Off’ before entering the work space. If in doubt, you must consult a licensed electrician. • Care and safety measures must be followed when working in areas that contain live electrical wiring. • Defective electrical cables, terminals or any other electrical wiring must be repaired by the relevant specialist prior to installation. • Ensure the workspace has adequate and ample ventilation. If working in confined spaces, it is recommended to use a HEPA vacuum or other suitable dust extractors. • Before entering the workspace, complete a risk assessment inspection to identify hazards including but not limited to electrical, site access and ventilation.
INSTALLATION TIPS
• When placing HardieFire™ insulation inside the wall stud bays, ensure a minimum 5mm compression along sides is maintained.
• If cutting is required, please allow 5mm in addition to the required dimension to achieve above compression. CUTTING It is recommended to cut outdoors. If cutting indoors, please ensure that workspace is properly ventilated or HEPA vacuums/dust extractors are used. 1. Position cutting station so wind will blow dust away from the user or others in working area.
CUTTING
It is recommended to cut outdoors. If cutting indoors, please ensure that workspace is properly ventilated or HEPA vacuums/dust extractors are used. 1. Position cutting station so wind will blow dust away from the user or others in working area.
Product warranty
HardieFire™ insulation has a 10-year manufacturing warranty when used with HardieSmart™ systems. For terms and conditions of product warranty.
- Date Listed:08/08/2022
- Last Edited:16/12/2022
- Condition:New
- Shipping:Pickup Only
Similar Ads
- CNC Vibration Motor AC 220V 1Phase 40W Asynchronous Vibrating MotorCNC Vibration Motor AC 220V 1Phase 40W Asynchronous Vibrating Motor Vibrator Specifications: Name: Vibrator Motor Rated speed: 3000 RPM Rated voltage: 220V Type: 1 phase 40W Features: Adjustable eccentricity block: adjust the Angle of eccentricity block, can stepless adjust the excitation force , meet all kinds of requirements Adopt of imported bearings, low noise, smooth operation, long service life High temperature resistance pure copper enameled wire, all coppe$89Sydney City, NSW•239w
- Kartrite Cement Concrete Mixer 63L Sand Gravel Portable 220WKartrite Cement Concrete Mixer 63L Sand Gravel Portable 220W This Kartrite electric cement mixer has a 2.2 cubic ft 63 litre capacity bowl. With a flip of a switch it produces evenly mixed concrete. Equipped with an easy-load heavy duty steel drum, this mixer is also ideal of mixing sand and gravel. It has two 5.5 inch rubber wheels, easy to control. which provide convenience for moving the machine around the job site. Ideal for DIY entusiast and landscapers for mixing concrete for small$289Sydney City, NSW•243w
- Shower Niche - 350 X 600 X 92mm Prefabricated Wall Bathroom RenovationRemodelling a shower or building a new one? Consider one of our prefabricated shower niches. Designed to display and store bath accessories, these shower niches are great not only for showers, but also for bathrooms and wet rooms as well. Constructed with a core of high-density polystyrene and a waterproof, liquid-applied sealant, this niche gives you a waterproof, ready-made substrate. Easy to install and ready to tile within minutes of installation, these niches provide you with a versatile$88.30SHIPPING OFFEREDSydney City, NSW•11w
- Shower Niche - 350 X 1000 X 92mm Prefabricated Wall Bathroom RenovatioRemodelling a shower or building a new one? Consider one of our prefabricated shower niches. Designed to display and store bath accessories, these shower niches are great not only for showers, but also for bathrooms and wet rooms as well. Constructed with a core of high-density polystyrene and a waterproof, liquid-applied sealant, this niche gives you a waterproof, ready-made substrate. Easy to install and ready to tile within minutes of installation, these niches provide you with a versatile$148.18SHIPPING OFFEREDSydney City, NSW•11w
- Shower Niche - 360 X 420 X 92mm Prefabricated Wall Bathroom RenovationRemodelling a shower or building a new one? Consider one of our prefabricated shower niches. Designed to display and store bath accessories, these shower niches are great not only for showers, but also for bathrooms and wet rooms as well. Constructed with a core of high-density polystyrene and a waterproof, liquid-applied sealant, this niche gives you a waterproof, ready-made substrate. Easy to install and ready to tile within minutes of installation, these niches provide you with a versatile$81.96SHIPPING OFFEREDSydney City, NSW•11w
- Shower Niche - 250 X 900 X 92mm Prefabricated Wall Bathroom RenovationRemodelling a shower or building a new one? Consider one of our prefabricated shower niches. Designed to display and store bath accessories, these shower niches are great not only for showers, but also for bathrooms and wet rooms as well. Constructed with a core of high-density polystyrene and a waterproof, liquid-applied sealant, this niche gives you a waterproof, ready-made substrate. Easy to install and ready to tile within minutes of installation, these niches provide you with a versatile$91SHIPPING OFFEREDSydney City, NSW•10w
- Giantz 2.5MM 100M Twin Core Wire Electrical Cable Extension Car 450V 2With its twin core design, our Twin Cable Sheath Wire is one of the best in the market. Comprising pure oxygen-free copper and a highly durable and strong reinforced PVC cover with black sheathing, our twin core sheath wire can handle any application with ease and confidence. And that can make a difference with a good project and a great one. Not least. The wire is waterproof, fire-retardant and can withstand extreme temperature changes without losing any of its effective conductivity. The wire$56SHIPPING OFFEREDSydney City, NSW•10w
- Bathtub Folding Portable Bath Tub Kids Adult Warm Spa Soaking BarrelBathtub Folding Portable Bath Tub Kids Adult Warm Spa Soaking Barrel PVC Features: It can be folded and stored with good heat preservation effect. Folding design, idle does not take up space, the folded bathtub is only 5cm, can be stored. 6 Thick insulation layer, specially developed for bathing. Not afraid of high temperature, heating odor free, environmentally friendly materials, healthy bath. Specification: 100% brand new with high quality Suitable height: Belo$79Sydney City, NSW•129w
- Giantz 3MM 10M Twin Core Wire Electrical Cable Extension Car 450VThe Giantz 3MM twin-sheath cable is designed using high-quality materials for automotive applications. Made from reinforced PVC material, this cable offers durability and resistance to wear and tear. It features an oxygen-free copper core conductor, PVC insulation and a PVC outer jacket, protecting the wires and ensuring excellent conductivity to minimize signal loss. It is SAA-certified, guaranteeing compliance with safety and quality standards. The cable also boasts low eccentricity, which me$29.99SHIPPING OFFEREDSydney City, NSW•5w
- Shipping Container Home Portable Shed Office Studio Pod House CabinPermit is not required in NSW. Your Flatcuby Plus is fully customisable to suit any purpose and space with four sizes to choose from: Standard Sizes: 2.4m x 3.15m, 2.4m x 3.95m, 2.4m x 5.0m, 2.4m x 5.95m, 2.4m x 11.9m 3.0m x 3.15m, 3.0m x 3.95m, 3.0m x 5.0m, 3.0m x 5.95m, 3.0m x 8.8m, 3.0mx 9.6m, 3.0m x 11.9m 3.6m x 5.95m, 3.6m x 11.9m 6.0m x 6.0m, 6.0m x 9.0m, 6.0m x 12.0m Customization also available The 10 sqm (20 sqm if in NSW or ACT ) model does not require a permit to erec$11,330Sydney City, NSW•131w
- 36PCS 32CM X 50CM Car Sound Deadener Butyl Noise Insulation Heat ProofFREE DELIVERY IN NSW, VIC and QLD Metro area! Improve your vehicle NVH performance with the Sound Deadener. Made of top quality butyl-based rubber and an aluminium top layer, this lightweight deadener is a non-drying self-adhesive mat that absorbs sounds and shocks for a quieter ride. The eco-friendly material is non-toxic, odourless and non-corrosive Better till, it performs well even in extreme temperatures of hot and cold and is excellent for sealing against water and air ingress. Not least$198NegotiableRiverwood, NSW•26w
- Pipe lagging installPipe lagging supply n install. Avoid toilet pipe noise, compulsory for apartment. Recommend to install on double storey houses. Please contact for a quote$130SHIPPING OFFEREDRiverwood, NSW•26w
- Ecowool insulation for sale in NSWAustralian building energy code approval, complying with BCA code. Wall batts, ceiling batts, acoustic batts are all available Budget affordable cost For detail quotes, please contact me.$60SHIPPING OFFEREDNegotiableIngleburn, NSW•26w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here