58 views
CR-6 MAX 3D printer with automatic levelling - 400x400x400 print space
$950 Negotiable
I am selling my Creality CR-6 max 3D printer due to downsizing. It is in very good condition and has done relatively few prints (about 4 rolls of filament used on it), and is only 1 year old. I had the levelling sensor replaced under warranty as it wasn't reliable, now works perfectly. The extruder has occasionally jammed while printing but I suspect this is due to clogged print head which I don't have time to clean out at the moment. Other than that it prints wonderfully, with excellent accuracy and limited stringing.
Great first-printer features:
- Automatic bed levelling
- Filament run-out detection
- Print-resume after power loss
- 400x400x400mm build volume
It is stored in a 3D printing tent (valued at $110) which I would be happy to throw in with the printer at no extra cost. The printer itself retails at around $1,200-$1,500. Given its size I recommend pickup.
Great first-printer features:
- Automatic bed levelling
- Filament run-out detection
- Print-resume after power loss
- 400x400x400mm build volume
It is stored in a 3D printing tent (valued at $110) which I would be happy to throw in with the printer at no extra cost. The printer itself retails at around $1,200-$1,500. Given its size I recommend pickup.
- Date Listed:25/03/2024
- Last Edited:23/04/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- HP OfficeJet Pro 6230 e Inkjet Printer Wireless Photo-Run out Ink DemoLocal Pick up from Mount Waverley 3149 or Chadstone 3148 This's Demo item. only run out ink (without box), Excellent Condition as new still have film on printer. (including Power cabel. you can download software on offical website) Print only, wireless Print speed ISO: Up to 18 ppm (black), up to 10 ppm (color) Auto duplex printing; Borderless printing High yield ink available Dynamic security enabled printer 2-sided printing Allows you to print on both sides of the page, cutting your paper$59.95Kemps Creek, NSW•37w
- Creality Ender 5 Pro 3D Printer with CR Touch in custom enclosureCreality Ender 5 Pro 3D Printer with CR Touch in custom enclosure from IKEA Lack 32-bit Silent board installed, will also include old board Newly installed CR Touch, firmware already setup and working as it should, new PEI plate Also included glass plate Enclosure is not tidy but it does the job, but you can also revert back to original and throw away the enclosure if you only print PLA or PETG I don't have room anymore hence selling$270Blacktown, NSW•7w
- Creality cr-10 maxHello, I have a Creality CR-10 Max for sale, it is brand new in the box, never opened. I liked the idea of 3D printing and its been sitting there for about 7 months now un-opened and decided, its probably something i wouldnt really invest time into. I have 3 rolls of filament to go with it. Not in any hurry but would like to move it on I bought it brand new from 3D printers online / castle hill / located North rocks and unfortunately, too large to ship.$550North Rocks, NSW•7w
- Konica Minolta Bizhub C250i Colour Copy Print & Scan (Low Count)bizhub C250i Simple, connected and safe. Discover the bizhub i-Series! 25/25 ppm in colour and black & white Paper formats: A6-SRA3, custom formats and banner format of up to 1.2 metres length 10.1-inch tablet-like colour touch panel with multi-touch support and redesigned user interface for intuitive operation and ease of use Reduced environmental impact thanks to state-of-the-art technology with competitively low power consumption – saves both energy and money Highest data security featurin$4,250NegotiableBankstown, NSW•5w
- Konica Minolta C368 (Fully Refurbished) - Low CountDescriptions Technical speciications SYSTEM SPECIFICATIONS System memory 2,048 MB (standard) System hard disk 250 GB (standard) Interface 10-Base-T/100-Base-T/1,000-Base-T Ethernet; USB 2.0 Network protocols TCP/IP (IPv4 / IPv6); IPX/SPX; NetBEUI; AppleTalk (EtherTalk); SMB; LPD; IPP; SNMP; HTTP Frame types Ethernet 802.2; Ethernet 802.3; Ethernet II; Ethernet SNAP Automatic document feeder (optional) Up to 100 originals; A6–A3; 35–163 gsm RADF or Dualscan ADF available Printable p$3,200SHIPPING OFFEREDBankstown, NSW•13w
- Professional Photographic and Artwork PrinterProfessional quality printer: Epson Stylus Pro 3880. Excellent for printing posters and large wall prints - suitable for framing. Will print large format, gallery-quality color and black-and-white output up to 17" x 22". New worth $1000, asking $400 ono. Unused and stored well for 5 years - due for service.$400NegotiableGlenorie, NSW•2w
- Canon MegaTank G7065 Colour Ink Tank Multi-Function Printer G7065Canon MegaTank G7065 Colour Ink Tank Multi-Function Printer G7065 Max Print Quality (dpi) 4800 x 1200 Cartridge Ink Colours Black, Cyan, Magenta, Yellow Ink Cartridge Configuration Canon GI-60 Print Document Size A4, A5, B5, Envelope, Legal (LGL), Letter (LTR) Duplex Printing Yes Scanner Type ADF, Flatbed Max Optical Scan Resolution (dpi) 1200 x 2400 Connectivity USB, Wi-Fi Weight (kg) 9.6 Height (cm) 23.4 x Width (cm) 40.3 x Depth (cm) 36.9 Package : 53cm x 48cm x 33cm, 14kg$565NegotiableChatswood, NSW•36w
- Brother Multi Function Colour Printerif the ad is up its still available !!! Brother Multi-Function Colour Printer MFC-J6510DW Manual download https://support.brother.com/g/b/manualtop.aspx?c=au&lang=en&prod=mfcj6510dw_all MFC-J6510DW pickup Bexley NSW 2207 Specifications • Visit www.brother.com.au General printer Type Inkjet Print Method Mono Piezo with 210 x 1 nozzle Colour Piezo with 210 x 3 nozzles Memory Capacity 64 MB LCD (Liquid Crystal Display) Wide 3.3 in. (82.8 mm) TFT Colour LCD Power Source (Taiwan) AC 100 to 1$20Bexley, NSW•53w
- Large format printer and vinyl cutter, Roland XR640Roland XR640 printer / cutter. Machine comes with additional heater/dryer/take up attachment. 1600mm wide print and cut capabilities. Excellent for vinyl cutting. If need printing, Some printhead block some part may need fix or replace. 8 colour CMYK lc lm lk & white (for printing on clear films). This printer stop use till end of 2021, as I bought new printer. Now all cartridge filled with cleaning liquid for other buyer further easy fix printhead. Pick up from Bankstown NSW2200. Price $420GST$3,100NegotiableBankstown, NSW•53w
- A3 colour LED printerOKI C810N A3 Colour LED Printer 32ppm mono, 30ppm colour (A4) 1200 x 600dpi print resolution 128MB Memory (Max 128MB) Windows/Mac Host-Based Printing System Works well. Was not used extensively. Needs cleaning service$70NegotiableSt Ives, NSW•12w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here