26 Results: New & Used in Power Tools in West Swan 6055, WA

Please note that this machine is supplied with a new set of Ridgid cutting dies. Specifications: Condition: Used Type: Electric Pipe and Bolt Threading Machine Make: Ridgid Series: Compact Model: 300 Part: 58752 Serial: AF077390315 Pipe: 3mm to 50mm Bolt: 6mm to 50mm Speed: 38rpm, 52rpm Chuck: Hammer Type Motor: 1/2hp, 240VAC Accessories: New Threading Die Set, Stand, Foot Switch Weight: 52.3kg Replacement price on this unit is approximately AUD$6800

Three available - end of project Specifications: Condition: Used Type: Vacuum Base Diamond Core Drilling Stand Make: Hilti Model: DD-ST 150-U CTL Serial: 042124 Base: 470 x 246mm Height: 953mm Fix: Vacuum Accessories: Handle Weight: 14.5kg Replacement price on this unit is approximately AUD$2800

TWO AVAILABLE These units were purchased for a project but never used. Specifications: Condition: New Type: Pneumatic Airless Paint Spray Gun Make: Graco (USA) Series: Triton D16A Model: 233480 Serial: A274509 Pump: 1:1 Ratio, 24B236, C16D, Serial# Hose: Nil Gun: Nil Pressure: 100psi, 7bar Flow: 32 LPM max freeflow Accessories: Nil Weight: 13.6kg Replacement price on this item is approximately AUD$2950

I have a quantity of these Hilti DX460 Low Velocity Powder Actuated nail guns available. The heads are X-460-F8 They are all end of project and the one in the photos is typical of the rest. Please note that they all have a small engraved asset number on the side - see photos Postage can be arranged for $30.

• Bosch

I have a quantity of Bosch Cordless Universal Cutters from an end of project. The cutters are skins only and have all been tested. The cutter in the photos is typical of the rest. The tool is designed for cutting the following: PVC Carpet Cardboard Leather Fabrics The cutter takes the Bosch 10.8V small tool triangular battery. Charger and Battery combos are available on Aliexpress for $25. New price on this tool(skin) is appr $265. **shipping can be arranged for $20

• Makita

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 58799 Power: 1200W Torque: 1000Nm Speed: 1400rpm Impact: 1500/min Accessories: Handle, Hard Case, 55mm Sockets, Spare rubber nose cover Weight: 14.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 67230 Power: 1200W Torque: 1000Nm Speed: 1400rpm Impact: 1500/min Engraving: "T3865410" on bottom Accessories: Handle, Hard Case, 2 x 32mm Sockets Weight: 14.0kg Replacement price on this kit is approximately AUD$1250

• Metabo

** Please note that this unit does not come with a fluid bottle. "Features: • Powerful magnetic core drill with large lift for core and full drilling • Robust Metabo Marathon Motor for up to 5 times increased service life for extra long service life • Integrated coolant container for optimal cooling of vertical and horizontal bores • Automatic coolant feed to the tip of the drill bit enables the machine to be used single-handedly • Magnet base with high holding power for safe operation

Specifications: Condition: New Type: Electrical Extension Cable Make: Appleton Series: PCX Model: 2P T 16A Length: 25m Plugs: PRE316PB & PRE316MB Rating: IP66 Weight: 6.3kg

I have a few of these available Specifications: •Condition: Used •Type: Portable Socket Outlet GPO •Make: Spinefex •Series: Lifeguard •Model: LG6.6APSOA15W •Rating: 15A, 3600W •RCD: 30mA •Outlets: 6 x 15A 240VAC •Protection: IP65 •Housing: Polyethylene •Weight: 3.0Kg Replacement price on this unit is approximately AUD$600

I have a few of these available. The one in the photo is typical of their cosmetic condition. Specifications: Condition: Used Type: Portable Socket Outlet GPO Make: Spinefex Series: Lifeguard Model: LG6.4APSOA15W Rating: 15A, 3600W RCD: 3mA Outlets: 4 x 15A 240VAC Protection: IP65 Housing: Polyethylene Markings: Weight: 2.6Kg Replacement price on this unit is approximately AUD$450

Specifications: Condition: Used Type: Pneumatic Impact Air Wrench Make: Kuken Model: KW3800 Serial: L60013 Drive: 1 inch, 25mm Torque: 1800Nm max (300Nm to 1370Nm recommended) Bolts: up to 1.5" recommended Flow: 21.2cfm Speeds: 4 Direction: Fwd/Rev Accessories: Nil Weight: 7.4Kg Replacement price on this unit is approximately AUD$1500

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 68681 Power: 1200W Speed: 1400rpm Impact: 1500/min Accessories: Nil Weight: 8.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Impact Wrench Rattle Gun Make: Makita Model: 6906 Serial: 416438 Drive: 3/4", 19mm Power: 850W, 588Nm Direction: FWD/REV Input: 240VAC Accessories: Metal Case, user Manual Weight: 5.5kg Replacement price on this unit is approximately AUD$900

This drill was kept as a spare on the Gorgan Gas Project and is unused. It has a laser asset number etching on the side. It does not come with a drift or handle. "Features Powerful three-speed drill with extra high torque Robust mechanical gearbox with oil bath lubrication Robust die cast aluminium gear housing for optimum heat dissipation and durability Vario (V)-Electronics for working at customised speeds to suit various application materials Safety clutch: mech

" .... The HMD150 is small, powerful, and a has a full 25mm depth of cut. The HMD150 is a fabricator's dream. It gets into tight spots with the low profile 7-13/16" height. Also it has the lift detection safety feature, eliminating safety switch adjustments. The HMD150 uses the Rotaloc PlusTM cutters from Hougen. They have a bayonet-style twist and lock shank for quick cutter changes. Rugged and full of power the HMD150 is great tool for construction and fabrication ...... 12-35 mm capacity wit

Specifications: Condition: New Type: Pneumatic Impact Wrench Make: Ingersoll Rand Model: 2171XP Serial: SR12F06002 Drive: 1", 25.4mm Force: 1250 ft lbs RPM: 6000 max Directions: Fwd/Rev, full power both ways Accessories: Hose Safety Lead Weight: 5.5kg Replacement cost is approximately AUD$1700

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Power: 1200W Speed: 1400rpm Impact: 1500/min Accessories: Nil Weight: 8.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Impact Wrench Rattle Gun Make: Makita Model: 6906 Drive: 3/4", 19mm Power: 850W, 588Nm Direction: FWD/REV Engravings: "T1363240" on side Input: 240VAC Weight: 5.5kg Replacement price on this unit is approximately AUD$900

2 available. These rattle guns were kept as spares on a local gas project. They have asset engavings but have never been used. Specifications: Condition: New Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 63898 Power: 1200W Speed: 1400rpm Impact: 1500/min Engraving: "T3789814" on side Accessories: Handle, Socket, User Manual, Hard Case Weight: 12.0kg Replacement price on this kit is approximately AUD$1250

I have a few of these rattle guns that are surplus equipment at the end of gas project. This unit was held as a spare and appears to have had litttle if any use. Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 53534 Power: 1200W Speed: 1400rpm Impact: 1500/min Engraving: "T3238623" on side Accessories: Handle, User Manual, Hard Case Weight: 12.0kg Replacement price on this kit is

Specifications: Condition: Used Type: Power Distribution Board Make: Bosbox Model: Bosbox15A Rating: 3600W Input: 15A 240VAC Outputs: 6 x 15A 240VAC GPO RCD: 30mA Enclosure: IP66 Weight: 3.0kg Replacement price on this unit is approximately AUD$65

I have a few of these available, also 15A 6 Outlet versions. Specifications: Condition: Used Type: Portable Socket Outlet GPO Make: Spinefex Series: Lifeguard Model: LG6.4APSOA10W Rating: 10A, 2400W RCD: 10A Outlets: 4 x 10A 240VAC Protection: IP65 Housing: Polyethylene Markings: "Downer", various Weight: 3.0Kg Replacement price on this unit is approximately AUD$450

These batteries are surplus from the end of a gas project. The one in the photo is typical of the lot and they all appear to have had little if any use. All batteries test and charge up. Specifications: "Cordless high-speed drill exclusively designed for use with the X-BT fastening system High drilling performance on steel with small-diameter drill bits For use with the X-BT system for coated, painted and high-strength steel applications Drilling highly accurate holes fo