1099 views
HOLDEN-COMMODORE-308-304-253-ENGINE-BLOCK-PATTERN-RE-DRILLS-TO-T
$275
Holden/Commodore 308 / 304 or 253 Block Re-drills To Turbo or Trimatic Pattern
This is not an add for a block
This is to have your 308 / 304 or 253 block re-drilled
Aussie 4 Speed/Tri-matic pattern To Turbo/350/400/700 or Power Glide Pattern
OR
Turbo/350/400/700 or Power Glide pattern To Tri-matic Pattern/Aussie 4 Speed
WHICH EVER WAY YOU NEED IT.
To drill a pattern change I need minimum of block and crank to set up on
or I can do short block or complete engine (without oil and water)
I have been drilling these pattern changes for over 40 years and it is the best way to go
instead of using an adaptor which damages the front pump in your transmission
and flex plate due to miss-alignment, It also illuminates the need for after market
fly wheel cover extension and you can use your original tailshaft, If changing
from aussie 4 speed or trimatic to turbo 350.
$275
(HOLDEN V8/6CYL AND CHEV BIG & SMALL BLOCK ENGINE RECONDITIONING SERVICE AVAILABLE)
Further Information Phone Jim 0n ******7454
PLEASE NO EMAILS OR SMS AS I DO NOT HAVE TIME TO PLAY EMAIL OR SMS PING PONG.
LONDONDERRY NSW (Windsor NSW)
This is not an add for a block
This is to have your 308 / 304 or 253 block re-drilled
Aussie 4 Speed/Tri-matic pattern To Turbo/350/400/700 or Power Glide Pattern
OR
Turbo/350/400/700 or Power Glide pattern To Tri-matic Pattern/Aussie 4 Speed
WHICH EVER WAY YOU NEED IT.
To drill a pattern change I need minimum of block and crank to set up on
or I can do short block or complete engine (without oil and water)
I have been drilling these pattern changes for over 40 years and it is the best way to go
instead of using an adaptor which damages the front pump in your transmission
and flex plate due to miss-alignment, It also illuminates the need for after market
fly wheel cover extension and you can use your original tailshaft, If changing
from aussie 4 speed or trimatic to turbo 350.
$275
(HOLDEN V8/6CYL AND CHEV BIG & SMALL BLOCK ENGINE RECONDITIONING SERVICE AVAILABLE)
Further Information Phone Jim 0n ******7454
PLEASE NO EMAILS OR SMS AS I DO NOT HAVE TIME TO PLAY EMAIL OR SMS PING PONG.
LONDONDERRY NSW (Windsor NSW)
- Date Listed:26/08/2017
- Last Edited:26/08/2017
- Condition:Refurbished
- Make:Holden
Similar Ads
- NEW STARTER MOTOR HOLDEN V8 253 304 308 5.0 HQ HX HZ VB VK VL VN VP VRSTARTER MOTOR FOR HOLDEN COMMODORE V8 VB, VC, VG, VH, VK, VL, WH, LH, LX, HQ, HZ, HG, HK, HT, HJ, VQ, VN, VR, VP, VQ, WB, CHECK TABLE BELOW FOR VEHICLES SUIT MAKE: HOLDEN MODEL: COMMODORE/KINGSWOOD,TORANA, VB, VC, VG, VH, VK, VL, WH, LH, LX, HQ, HZ, HG, HK, HT, HJ, VQ, VN, VR, VP, VQ, WB, YEAR: *****1995 ENGINE: 5LTR V8/ 253/308 ENGINE TRANSMISSION: AUTOMATIC FLANGE DIAMETER: 70 HOLES: 2 X 9.5 KW 1.7 LENGTH: 244mm$175Smithfield, NSW•71w
- Crane Cams Camshaft suit 253-304-308 HoldenCrane Cams #244521 is a hydraulic flat tappet camshaft that suits 253-304-308 Holden V8 engines from******1987. The camshaft has a smooyh idle in 308 engines, and a lope at idle in 253 engines, it has a broad power band and delivers excellent everyday street performance: Lobe seperation angle= 112 , Valve lift= 448 intake, 464 exhaust, Duration=268 intake, 276 exhaust. The cam is BRAND New and a genuine Crane Cams Camshaft.$390Maroubra, NSW•82w
- Holden 304 308 - 375ci Engine Stroker Rotating Assembly KitHolden 304 308 - 375ci Engine Stroker Rotating Assembly Kit Please call for more information. Actual Engine CID: 375 Engine Stroke (in): 3.650 in. Balanced: No Pistons Included: Yes Piston Rings Included: No Piston Material: Hypereutectic aluminum Crankshaft Included: Yes Crankshaft Material: Cast steel Rear Main Seal Style: Rope Engine Balance: Internal Connecting Rods Included: Yes Connecting Rod Material: 4340 Chromoly Steel Connecting Rod Beam Style: H-beam Stre$2,490NegotiableCampbelltown, NSW•15w
- Holden 253 308 Downdraft EFI Intake Manifold & Ems Stinger v4 ECU SetHolden 253 308 Downdraft EFI Intake Manifold & Ems Stinger v4 ECU Set You can call us on for all your enquires. Engine Block Style: Stock/OEM standard deck Injection Style: 8 Throttle body Basic Operating RPM Range: Idle-7,000 Intake Trumpets: Intake Trumpets Included EGR: No Injectors Included: No Fuel Rails Included: Yes Throttle Body Included: 8 Pieces Base Material: Aluminum Casting Base Finish: Polished Assembled: Assembled Quantity: Sold as a Kit The individual throttle bo$2,650NegotiableCampbelltown, NSW•17w
- Holden 253 308 Downdraft EFI Stack Intake Manifold Complete PolishedHolden 253 308 Downdraft EFI Stack Intake Manifold Complete Polished You can call us on for all your enquires. Engine Block Style: Stock/OEM standard deck Injection Style: 8 Throttle body Basic Operating RPM Range: Idle-7,000 Intake Trumpets: Intake Trumpets Included EGR: No Injectors Included: No Fuel Rails Included: Yes Throttle Body Included: 8 Pieces Base Material: Aluminum Casting Base Finish: Polished Assembled: Assembled Quantity: Sold as a Kit The individual throttle bod$1,195NegotiableCampbelltown, NSW•17w
- Holden 253 304 308 VN Late Complete Blower Supercharger KitHolden 253 304 308 VN Late Complete Blower Supercharger Kit You can call us on for all your enquires. The 6-71 Supercharger kits can give you up to 50% more horsepower. They feature a polished case double-pinned rotors assembly that is timed and clearanced, heavy duty front and rear bearing plates, and an intake manifold with a pop-off valve relocated to the back. The kits also come with a billet aluminum nose drive assembly, upper and lower drive pulleys, an idler pulley and bra$6,600Campbelltown, NSW•17w
- New Holden 253 304 308 Assembled Aluminum Cylinder Heads PairBrand New Holden 253 304 308 Assembled Aluminum Cylinder Heads The price is for the pair of heads. *** Price reduced from $1,900. Be quick as there is limited quantity. *** Please call for more information.$1,190NegotiableCampbelltown, NSW•14w
- Holden V8 253 308 Rocker Bridges Commodore Torana Monaro GTS StatesmanHolden V8 253 308 Rocker Bridge Commodore Statesman Torana Monaro SS GTS Photo is representative only as there is a quantity for sale all in good usable condition Pickup Campbelltown NSW or will post Australia wide with tracking for $10.60 NOTE ! I have 8 of these available.If you wish to purchase a quantity of bridges they can be shipped for the same cost as one.$19Leumeah, NSW•9w
- Holden 304 308 3.480 355ci Stroker Rotating Assembly Kit STD-RJHolden 304 308 3.480" 355ci Stroker Rotating Assembly Kit STD-RJ Please call for more information. Actual Engine CID: 355 Engine Stroke (in): 3.480 in. Balanced: No Pistons Included: Yes Piston Rings Included: Yes Piston Material: Hypereutectic aluminum Piston Ring Facing Material: Plasma-moly Crankshaft Included: Yes Crankshaft Material: Cast steel Rear Main Seal Style: Rope Engine Balance: Internal Connecting Rods Included: Yes Connecting Rod Material: 4340 Chromo$1,490NegotiableCampbelltown, NSW•15w
- VT WH STATESMAN CAPRICE HOLDEN COMMODORE STARTER MOTOR 5.0L V8Oz Car Parts* Welcome to Oz Car Parts online shop for all your parts needs ## Fitting Service Available In Our Mechanical Workshop Fully Licensed ## Item Description; *BRAND NEW IN THE BOX AFTERMARKET DIRECT REPLACEMENT GOOD QUALITY STARTER MOTOR 5 YEAR WARANTY Suit: SEDAN WAGON UTE Holden Commodore VB 5.0L V8, *****1980 Holden Commodore VC 5.0L V8, *****1981 Holden Commodore VG 5.0L V8, *****1993 Holden Commodore VH 5.0L V8, *****1984 Holden Commodore V$109Smithfield, NSW•308w
- Truck Wheel and Tyre 11R 22.5Truck Wheel and Tyre 11R 22.5" Wheel size 8.25" x 22.5" Rim has been freshly sandblasted and painted Tyre condition as in photo Pick up can be organised from Richmond, Lithgow or Oberon Further information phone Jim on No SMS or email ping pong$150Windsor, NSW•54w
- Ford GT HO holley Genuine 780 cfm carburettorFord Holley GT HO Genuine phase 2 780cfm Professionally refurbished Part number: DOZF- 9510-Z List number: 4653 Date code: 012 Primary metering block # 6396 Secondary metering block # 6213 Primary butterflies # 224 $4250 Phone Jim on Do not text as I do not play email or sms ping pong and will not reply.$4,250Windsor, NSW•54w
- HOLDEN-304-308-355-FORGED-STROKER-PISTOHOLDEN ROSS FORGED PISTONS/STROKER MAXIMUM COMPRESSION (CAN BE DRESSED BACK TO SUIT YOUR NEEDS) SET OF 10 (2 SPARES) INCLUDES WRIST PINS & SPIRO LOCKS PISTON BORE SIZE .060 NO EMAIL OR SMS AS I DO NOT HAVE TIME TO PLAY PING PONG FURTHER INFORMATION CALL JIM on$975Windsor, NSW•348w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 7454