4515 views
Bertram-Novacraft 7.3 metre Centre Consul
$7,700
Item: Bertram- Novacraft 7.3 mtr Centre Consul Project
________________________________________
Up for sale here is a Bertram- Novacraft Hull Project.
Originally a Flybridge controlled hull with the upper superstructure requiring a full restoration so decision was made to prepare for a centre consul project
Passing the baton on this one and others due to other large competing yacht projects
Hull :
Had twin 470's with very good legs installed- now removed.
These motors /legs had considerable $$$ spent on them prior to our obtaining this boat which is comprehensively detailed in the extensive folder that goes with the motors/legs that are coming up for sale separately soon.
*** These motors are not included in this listing**
Has a very large underfloor ( centre mounted ) S/Steel fuel tank custom built for this hull together with a stainless steel grounding plate fitted to the hull floor
Large S/Steel screwed/capped Port and Starboard floor draining scuppers.
Floor area had new 18 mm ply floor sheets fitted and fibreglassed sealed to protect from elements whilst sitting- now removed as per photos ready for laying of a new selected floor layout
Stringers in generally good condition overall and all laid with heavy gauge woven glass as per original build, however depending on final floor layout further work will be required
A few smaller 100 mm stringers will need renewal –front area of hull on port/starboard side x approx. 2 metres .
Inboard motor mount transverse bearer is defective and needs replacement if going to fit a single V8 inboard. If podding this wont be required, but as a rule you would extend main stringers about a metre each and mesh to rear of transom then fit a couple of vertical knees for strength before fabricating and fitting a pod unit.
**Alloy centre consul unit shown in photos is included in sale.***
This is a well constructed centre consul.
Will require a full repaint and fitting of new Perspex window pieces
It is not permanently fitted at present and is shown in situ for illustration purposes only.*
Hull from keel to turn of chine has been 2 pack primed x 2 coats then 2 x coats of polyurethane 2 pack White topcoat. Will require final topcoat on completion of project
Hull from turn of chine to under gunnels has been 2 pack primed x 3 coats.
Selling together with steel cradles x 2 for transport/restoration purposes.
There is NO Trailer with this sale.
Crane Lifting facilities available on site at a reasonable charge
Transom- Is in perfectly good and original solid condition with absolutely no rot. Integrity is excellent.
Purchasers choice to either block original twin openings and install new single inboard V8 or install pod and go with an outboard.
Is totally open for easy inspection.
S/steel rod holders, Bow Rail, Cleats included in sale.
Inspections welcomed, strictly by appointment- Our site is within a 24 hour electronically gated industrial complex.
We are not always on site but are at times able to have others attend inspections for us.
Phone calls ONLY. Will not answer emails due to scammers
If its live its available and will only be delisted once it is sold
Please call John on *******4144 . Best time to get me is AFTER 5 pm and before 10 pm any day for inquiries or further information.
________________________________________
Up for sale here is a Bertram- Novacraft Hull Project.
Originally a Flybridge controlled hull with the upper superstructure requiring a full restoration so decision was made to prepare for a centre consul project
Passing the baton on this one and others due to other large competing yacht projects
Hull :
Had twin 470's with very good legs installed- now removed.
These motors /legs had considerable $$$ spent on them prior to our obtaining this boat which is comprehensively detailed in the extensive folder that goes with the motors/legs that are coming up for sale separately soon.
*** These motors are not included in this listing**
Has a very large underfloor ( centre mounted ) S/Steel fuel tank custom built for this hull together with a stainless steel grounding plate fitted to the hull floor
Large S/Steel screwed/capped Port and Starboard floor draining scuppers.
Floor area had new 18 mm ply floor sheets fitted and fibreglassed sealed to protect from elements whilst sitting- now removed as per photos ready for laying of a new selected floor layout
Stringers in generally good condition overall and all laid with heavy gauge woven glass as per original build, however depending on final floor layout further work will be required
A few smaller 100 mm stringers will need renewal –front area of hull on port/starboard side x approx. 2 metres .
Inboard motor mount transverse bearer is defective and needs replacement if going to fit a single V8 inboard. If podding this wont be required, but as a rule you would extend main stringers about a metre each and mesh to rear of transom then fit a couple of vertical knees for strength before fabricating and fitting a pod unit.
**Alloy centre consul unit shown in photos is included in sale.***
This is a well constructed centre consul.
Will require a full repaint and fitting of new Perspex window pieces
It is not permanently fitted at present and is shown in situ for illustration purposes only.*
Hull from keel to turn of chine has been 2 pack primed x 2 coats then 2 x coats of polyurethane 2 pack White topcoat. Will require final topcoat on completion of project
Hull from turn of chine to under gunnels has been 2 pack primed x 3 coats.
Selling together with steel cradles x 2 for transport/restoration purposes.
There is NO Trailer with this sale.
Crane Lifting facilities available on site at a reasonable charge
Transom- Is in perfectly good and original solid condition with absolutely no rot. Integrity is excellent.
Purchasers choice to either block original twin openings and install new single inboard V8 or install pod and go with an outboard.
Is totally open for easy inspection.
S/steel rod holders, Bow Rail, Cleats included in sale.
Inspections welcomed, strictly by appointment- Our site is within a 24 hour electronically gated industrial complex.
We are not always on site but are at times able to have others attend inspections for us.
Phone calls ONLY. Will not answer emails due to scammers
If its live its available and will only be delisted once it is sold
Please call John on *******4144 . Best time to get me is AFTER 5 pm and before 10 pm any day for inquiries or further information.
- Date Listed:29/04/2024
- Last Edited:29/04/2024
- Listing Type:Private seller
- Make:Bertram
- Hull Type:Single Hull
Similar Ads
- Bertram Ski Boat
- Single Hull
- 16 ft
Freshly done every thing on this is brand new beside the outboard Fresh paint job 200hp Mercury/ Mariner outboard Seastar hydraulic steering All new 12v wiring Wake tower and rack Custom frameless windscreen Brand new seat Under gunnel lighting All nav lights are on the tower and wires run through tower and hidden neatly Custom 135L aluminium bow fuel tank Water separating filter 12 months rego Ready to go and enjoy your summer out on the water$10,000NegotiableSomersby, NSW•16w - ALUMMIUM Boat WITH YAMAHA MOTOR 15hp
- 12 ft
- Aluminium
BOAT FOR SELL BOAT MANUFACTURER: TELWATER MATERIAL: ALUMINIUM LENGTH: 3.50 METRES HULL COLOUR: UNPAINTED HULL TYPE: RUNABOUT OUTBOARD MOTOR MANUFACTURER: YAMAHA OUTBOARD MOTOR MANUFACTURED: 2009 (Short Shaft) OUTBOARD MOTOR HP: 15 HP TRAILER MANUFACTURER: SALES TRAILER MANUFACTURED: 2013 TRAILER MODEL: 12FT00A ACCESSARIES: A) BOAT BIMINI KIT 4 BOW B) SET OF OATS C) PETROL TANK AND HOSE FITTINGS D) STARTING KEY E) ANCHOR WITH ROPES F$4,250NegotiableLake Haven, NSW•4w - Boat formosa
- Single Hull
- 15 ft
4.3m formosa centre console fishing boat 40hp mercury excellent condition both boat and trailer registered$10,500NegotiableBuff Point, NSW•2w - Polycraft Warrior 530 Centre Console
- 17 ft
- Polycraft
Like new, always garaged & extremely well set up with high quality components & ready to hit the water. Wide beam, very stable, quiet hull and soft ride. Her name is BYTE ME. 140hp Suzuki 4 stroke 150 hrs & just serviced Motor cowling cover (transit) Suzuki digital gauge Troll control switch 4 blade stainless prop 2 spare props (1 × 3 blade & 1 x 4 blade) Fast tail engine foil My Wedge engine support 130L under floor fuel tank Hydraulic steering Humminbird Helix 10 SI Mega inc Navionics chip Hu$49,000NegotiableUmina Beach, NSW•36m
- Bertram 28 B Flybridge Cruiser- Twin turbo diesels.
- Single Hull
- 28 ft
Bertram B28 Flybridge Cruiser. Twin screw BMW D190 turbo diesels/ZF Gearboxes Approx $20 k spent on motors 3 years ago. Expressions of Interest over $25,000.00 Vessel removed to hardstand after it argued with a sandbar and bent portside shaft and damaged log gland. Log gland and surrounds professionally repaired /re-installed. New prop shaft manufactured by Porters and port side rudder checked for correct alignment -to be reinstalled. Sodablasted hull completely bottom and sides up to waterli$25,000NegotiableWoy Woy Bay, NSW•2h - Volvo Turbo Diesel 6 cylinder Truck motor/box combo -1979 N12 TipperVolvo Turbo Diesel 6 Cylinder Motor, Gearbox and PTO This Motor/Gearbox unit is complete, and it is out of a 1979 Volvo N12 Tipper. The motor plate indicates it is a 9/79 model, and it also has a PTO. Comes with the matched gearbox. The complete tipper unit has been stripped down. The cabin was shot to pieces and was not worth repairing. The other parts were, as it was road registered up till 2016. The speed-o as shown in the photos was on 286k but the motor was believed to be reconditioned$1,234.56NegotiableWoy Woy Bay, NSW•1d
- Windscreen- Curved- Taylor Made brand-As new condition and unused
- 1D
Curved and tinted glass Taylor Made boat windscreen. Top quality unit-unused. In as new condition-no scratches or dings. Width across front 1350mm overall Rake length on both sides is 1600 mm overall. Front middle section is 450 x450 mm Height is 450mm across front. Will suit many Searays and other sports boats and /or custom builds. RRP is in excess of $2400.00 Selling for $850 firm. Will bubble wrap/foam protect for courier pick up. Marine, Industrial, Commercial and Domestic items are$850Woy Woy Bay, NSW•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 4144