1051 views
WC68 6″ PTO Wood Chipper - Delivery Australia Wide
$4,689
Woodland Mills is pleased to offer 6” PTO drive wood chipper with auto hydraulic feed. The WC68 was designed to offer acreage owners an economical and well engineered wood chipper. This is a serious wood chipper, with a huge 6” chipping capacity. It was built to be the best valued wood chipper in its class.
The Facts
• Huge 8.25” diameter infeed roller
• Large 6”x 8” in-feed opening
• Forward/Neutral & Reverse infeed roller operation
• Infeed roller speed control valve
• Self contained hydraulic system run off tractor PTO
• Hinged clamshell flywheel housing design for quick and easy blade changes.
• 4 reversible chipper blades
• 24” diameter / 3/4” thick / 100lb solid steel flywheel
• Flywheel speed of 540 RPM
• 5/16” thick chipper housing
• 360 degree rotating discharge chute
• Folding infeed chute for minimum footprint during storage
• 1/4” thick steel chipper base
• Commercial quality / standard sized greasable bearings
• Quick attach 3 point hitch system
• Powder coated finish
• Hydraulic hose line protectors
• 1 hour assembly time
• PTO shaft included
• Heavy duty 710 lbs overall design/weight
• 3 year warranty
Capacity
The WC68 operates on tractors with 20-50 HP at the PTO. It utilizes a large 23” x 27” infeed hopper opening that tapers down to an 6” x 8” opening where the 8.25” diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼” diameter and as large as 6” diameter can be fed through the WC68. To chip full 6” diameter logs at full infeed speed, tractors with over 40 HP at the PTO is required.
Hydraulic Infeed System
Branches are pulled into the WC68 via the large 8.25” diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
Chipper Blades
The WC68 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts. Changing blades can be made very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
Folding Infeed Chute
The infeed chute on the WC68 wood chipper has a large 23” x 27” opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.
Infeed Opening
The opening in the flywheel housing is a large 6”x8” square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.
Discharge Chute
The discharge chute was designed to rotate 360 degrees by simply loosening the eye bolt and spinning it by hand to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 75” off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground.
Shipping Australia wide - Send postcode to receive freight cost
Info******@******.au
The Facts
• Huge 8.25” diameter infeed roller
• Large 6”x 8” in-feed opening
• Forward/Neutral & Reverse infeed roller operation
• Infeed roller speed control valve
• Self contained hydraulic system run off tractor PTO
• Hinged clamshell flywheel housing design for quick and easy blade changes.
• 4 reversible chipper blades
• 24” diameter / 3/4” thick / 100lb solid steel flywheel
• Flywheel speed of 540 RPM
• 5/16” thick chipper housing
• 360 degree rotating discharge chute
• Folding infeed chute for minimum footprint during storage
• 1/4” thick steel chipper base
• Commercial quality / standard sized greasable bearings
• Quick attach 3 point hitch system
• Powder coated finish
• Hydraulic hose line protectors
• 1 hour assembly time
• PTO shaft included
• Heavy duty 710 lbs overall design/weight
• 3 year warranty
Capacity
The WC68 operates on tractors with 20-50 HP at the PTO. It utilizes a large 23” x 27” infeed hopper opening that tapers down to an 6” x 8” opening where the 8.25” diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼” diameter and as large as 6” diameter can be fed through the WC68. To chip full 6” diameter logs at full infeed speed, tractors with over 40 HP at the PTO is required.
Hydraulic Infeed System
Branches are pulled into the WC68 via the large 8.25” diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
Chipper Blades
The WC68 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts. Changing blades can be made very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
Folding Infeed Chute
The infeed chute on the WC68 wood chipper has a large 23” x 27” opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.
Infeed Opening
The opening in the flywheel housing is a large 6”x8” square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.
Discharge Chute
The discharge chute was designed to rotate 360 degrees by simply loosening the eye bolt and spinning it by hand to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 75” off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground.
Shipping Australia wide - Send postcode to receive freight cost
Info******@******.au
- Date Listed:Yesterday
- Last Edited:Yesterday
- Condition:New
Similar Ads
- Simply Stainless 700 Series Single Blender Station with Set DownContact Us Or Visit Our Store We Approve Finance For 65k In 10 Minutes* Delivery Australia Wide Phone: 02******0751 Showroom: 151-153 Parramatta Road, Granville NSW 2142 Your restaurant equipment specialist in Sydney & Newcastle Feel free to come by our factory and showroom in Granville NSW. We have outfitted and supplied a lot of commercial catering equipment to restaurant chains & independent shops. Our range include cooking equipment, freezer rooms, commercial char grills,$1,924.89Granville, NSW•94w
- Vogue Plain Plastic Dough Scraper - Hospitality SuppliesContact Us Or Visit Our Store We Approve Finance For 65k In 10 Minutes* Delivery Australia Wide Phone: 02******0751 Showroom: 151-153 Parramatta Road, Granville NSW 2142 Your restaurant equipment specialist in Sydney & Newcastle Feel free to come by our factory and showroom in Granville NSW. We have outfitted and supplied a lot of commercial catering equipment to restaurant chains & independent shops. Our range include cooking equipment, freezer rooms, commercial char grills,$3.19Granville, NSW•94w
- ✅ Fire Wood For Sale ✅ (Delivery Available)$1/KG Can deliver up to 500KG to Oatlands and North Parramatta for flat $10 rate.$1Oatlands, NSW•5d
- Black & Decker A9275 Battery - Fast Free DeliveryBest Price Guarantee - Replacement Drill Battery for Black & Decker A9275 Black & Decker A9275 Power Tool Battery 24hr fast delivery. 3 -7 working days to Australia most areas. Replacement - 100% Compatible. Meet or Exceed Original Specification. Battery Type: Ni-Cd Voltage: 12V Capacity: 2000mAh Color: Black Weight: 650g Dimensions: 91.50x80.70x102.20mm Reg Price: AU $69.56 Sale Price: AU $63.24 Batteryfast.org has a full range replacement Black & Decker A9275 poNegotiableGranville, NSW•101w
- Dyson 17083-0211 Battery - Free AU DeliveryReplacement Vacuum Batteries for Dyson 17083-0211 On Sales Dyson 17083-0211, DC31, DC34, DC35 Vacum Battery 24hr fast delivery. 3 -7 working days to Australia most areas. Replacement - 100% Compatible. Meet or Exceed Original Specification. Battery Type: Li-ion Voltage: 22.2V Capacity: 3000mAh Color: Black Weight: 299g Dimensions: 128 x 92 x 84mm Reg Price: AU $67.59 Sale Price: AU $61.44 At Batteryfast we work tirelessly to check our prices daily against our compeNegotiableGranville, NSW•97w
- Battery for Dewalt DE9094, AU Free DeliveryBrand New Heavy Duty Dewalt DE9094 Extended Life Drill Battery(14.4V, 3000mAh) Ni-MH 3.0Ah 14.4V Dewalt DE9094 Cordless Drill Battery List Price: AU $65.79 Now Price: AU $39.87 Compatible Part Numbers: 652345-01, DC9091, DC9094, DE9031, DE9038, DE9091, DE9092, DE9094, DE9502, DW9091, DW9094 Compatible Original Models(This is not the full list,if you can't find your model on the list,please feel free to contact us): Dewalt DC Series DC551KA, DC528 (Flash Light), DC612KA,$39.87Granville, NSW•100w
- Black & Decker FS146F4 Battery - Free DeliveryHeavy Duty Black & Decker FS146F4 Long Life Drill Battery(14.4V, 3000mAh) Battery For Black Decker Firestorm 14.4V 3.0Ah Ni-Mh A1714 FS140BX HP142KD List Price: AU $75.99 Now Price: AU $47.79 Compatible Part Numbers: FS140BX, 499936-34, 499936-35, A14, A144, A144EX, A14F, HPB14, A1714 Compatible Original Models(This is not the full list,if you can't find your model on the list,please feel free to contact us): BLACK DECKER BDG14SF-2, BDGL1440, BDGL14K-2,BD146F3-XE, CD142$47.79Granville, NSW•104w
- Replacement Battery for Hitachi EBM1830 - AU Local Free DeliveryAustralia trusted drill battery store: batteryfast.org brand new high capacity 4000mAh Hitachi EBM1830 Extended Life Battery is a rechargeable, removable battery pack designed to work with BCL1815 BCL1820 BCL1830 BCL1840. Buy high quality Hitachi EBM1830 Battery with best price, save your money and time! Li-ion 4.0Ah 18V Battery for HITACHI EBM1830 BCL1815 BCL1830 327730 List Price: AU $70.98 Now Price: AU $45.79 Compatible Part Numbers: Hitachi BCL1815, EBM 1830m BCL1840,326240, 3262$45.79Granville, NSW•125w
- FORMWORK PRODUCTS - REDIWALLAFS REDIWALL✅ 110mm 156mm 200mm 275mm 300mm - 2.8m - 3.0m - 3.2m - 3.6m 250mm Wide Panels CUT TO SIZE AVAILABLE TRACK AND CORNERS AVAILABLE❗️ CONCRETE SUPPLY ALSO AVAILABLE (Boral, Metromix & Gunlake) FREE QUOTES ✅ DELIVERY TO ALL AREAS 🚚 ☎️ 0420_593_524$60SHIPPING OFFEREDNegotiableSmithfield, NSW•28w
- Concrete laundry troughOld concrete twin trough Missing steel covering for top of dividing wall as pictured Trough is 1030mm wide x540mm deep x 390mm high Pickup Greystanes No delivery$35Greystanes, NSW•6w
- WC46 -4" PTO Wood Chipper - Delivery Australia WideThe Woodland Mills WC46 PTO driven wood chipper was designed to work with sub compact tractors with 15 to 30 HP at the PTO and features an auto hydraulic in-feed system, direct drive, a 4" x 6" (10 cm x 15 cm) opening and 360 degree swivel discharge chute. Product Description The Woodland Mills WC46 PTO drive wood chipper was specifically designed for sub-compact tractors with 15-30HP at the PTO. Featuring a hydraulic infeed system, the WC46 is capable of chipping up to 4" (10 cm) diameter$3,979Yennora, NSW•1d
- HM122 - Portable Bandsaw Mill and Trailers - Delivered Australia WideThe Woodland Mills HM122 is an entry-level portable sawmill packed full of impressive features while maintaining a budget-friendly price. Designed for hobby sawyers looking for an economical solution to mill lumber. The HM122 includes features like the RapidChange™ blade system, auto lube, an operation hour meter, wider cut capability and much more. The HM122 can cut 22” (55cm) diameter logs, producing boards up to 20” (51cm) wide and up to 10’ 4” (3.1m) in length. Constructed using a 4-post h$4,249Yennora, NSW•1d
- HM130MAX Portable Sawmill and Trailers - Delivered Australia WideThe HM130MAX is a wide capacity sawmill for sawyers looking to mill popular wide live edge slabs. Featuring a 30” (76cm) diameter log capacity matched with a 30” (76cm) throat opening that produces stunning high-value live edge boards. The HM130MAX Anniversary Edition is loaded with new features like our RapidChange™ blade system, auto lube, an operation hour meter, wider cut capability and much more. A heavy-duty 4 post head design with reinforced back beam support the serious HM130MAX cutting$7,299Yennora, NSW•1d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 293
8 offers have already been made