0 Results: wood lathe in Uralla Area, NSW

This Digital protractor uses angle sensor technology to calculate exact angles simply by tilting it to the desired angle. The LCD provides reading that is always displayed in upright position in any angle. It measure angles within 4 x 90° (0~360°) range. It also has Absolute Angle Measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. With simple self calibration no other fixtures is needed. It can converts to different unit from degre

TL 1000 85 with scroll chuck on solid bench

Mini wood lathe with 90mm 4 jaw self cantering chuck, internal and external jaws, 90mm faceplate, 3 dead ends, 1 life end, 8 various gouges and chisels, 1 deep bawl gouge, manual and tools

• Other

Australian made VicMarc VL850UNO wood lathe in very good working order. Comes with wood turning tools and other accessories.

Brand New Vickmarc Jawplates , 285mm Wood Turning Lathe $120 Pick Up Metford

• Other

Very good condition, includes chucks and dust extraction hood (no vacuum). Cash only.

Ryobi wood lathe (yellow stand and Mower not included) has live centre drive dog face plate and end sander disc. works well recently painted approx 1 m bed 300mm swing new lathe on order CASH ONLY

Hi I have for sale several Wooden Items hand carved or turned from Natural solid wood some have Live Edges. They have been in storage and may have scuff marks. The photos are in the following order. American Indian image created using Pyrography on a live edge cookie / slice. Wood burning, also called pyrography, is the process of drawing a picture on a piece of wood with a hot brass tip. Dimensions 270mm Wide x 385mm High x 22mm Thick Barramundi Mulga Wall Hanging Mulga wood live edge cookie

Specifications: Working Area: 1800 x 3600 x 300mm Acceptable Material Thickness: Up to 150mm Working Table: Vacuum Table Vacuum Pump: 7.5 KW Water Vacuum Pump Processing Resolution: ±0.1mm Re-positioning Resolution: ±0.02mm Spindle Motor: 7 Spindle motor 9 kW Air Cooled Spindle Tool Changer: Dual-process Pneumatic Tool Changer Spindle Rotating Speed: 24000rpm Transmitting System: X\Y axis Rack and Opinion Square guide; Z axis ball screw Square guide Driving Motor: 11 Driving motor X/Y/Z 1.5KW