233 Results: New & Used in Other Parts & Accessories in Torrington 4350, QLD

GP Bucket to Suit 5T Excavator with 4 Teeth Width: 600mm Pin Diameter: 45mm Centre to Centre : 255mm Between the ears: 170mm Shipping Dimension: L: 980mm x W: 660mm x H: 800mm Weight: 160KG

Unused 2024 Ripper To Suit 3T Excavator Pin: 40mm Centres: 200mm Between the ears : 145mm Shipping Dimension: L: 355mm x W: 242mm x H: 710mm Weight: 65KG

Unused 2024 Sieve / Riddle Bucket to Suit 3T Excavator Width: 1200mm Pin: 40mm Centre to Centre : 200mm Between the ears : 145mm 50mm x 50mm Sieve Shipping Dimension: L: 560mm x W: 1225mm x H: 600mm Weight: 145KG

Unused 2024 1000mm Mud Bucket To Suit 3T Excavator Width: 1000mm Pin: 40mm Centre to Centre : 200mm Between the ears : 145mm Shipping Dimension: L: 560mm x W: 1020mm x H: 560mm Weight: 140KG

Unused 2024 Manual 5 Finger Grab to Suit 3T Excavator Pin: 40mm Centres: 200mm Between the ears : 145mm Shipping Dimension: L: 630mm x W: 500mm x H:900m Weight: 246KGt

Unused 2024 450mm GP/Digging Bucket To Suit 3T Excavator Model: 450GP, Width: 450mm Pin: 40mm Centre to Centre : 200mm Between the ears : 145mm Shipping Dimension: L: 670mm x W: 515mm x H: 590mm Weight: 98KG

Fitted with: - Bed - Wardrobe - Shower - Toilet - Sink - Mirror - Hot & Cold water Inlets - 2 Waste Outlets - Fork Pockets - Light - Exhaust Fan Vent - 2 x Windows Shower: WELS Registration Number: S12830 & S15160, Water Efficiency Star rating: 3, Nominal Flow Rate 7.83 & 8.14 Toilet: WELS Registration Number: L07055, Efficiency Star Rating 4, Water Consumption Full Flush 4.5 L / Half Flush 3 L Sink: WELS Registration Number: T38665, Water Efficiency Star rating: 5, Nominal Flow Rate 4.86 NOT

To Suit Skid Steer 1680mm W Operating Pressure: 17-21MPa Dual Ram Approximate Shipping Dimensions: 1930mm L x 940mm W x 960mm H Approximate Weight: 210kg Grapple Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

Overall length 1705mm 145mm Wide Locking pins Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H Approximate Weight: 23kg Fork Extensions / Slippers is located in Toowoomba, QLD. NO Delivery Available.

Unused 20ft Portable Fold Out Container House Includes: 1 Large Sliding Door, 8 Sliding Windows Timber look flooring, Approximate Size when opened out: 20ft x 20ft, Adjustable feet for easy levelling Approximate Internal floor space: 5.35m x 6.1m (32.5 Sqm) Unit is folded up and ready for transport Approximate Shipping Dimensions: 5950mm L x 2200mm W x 2515mm H Approximate Weight: 2650kg. Please note: Units are not suitable for transport on Skel Trailers Approximate Shipping Dimensions: 5950mm

Fitted with: - Shower - Toilet - Sink - Mirror - Lockable Door - Hot & Cold Water Inlets - 2 Waste Outlets - Light - Exhaust Fan - 1 x Window - Fork Pockets Shower: WELS Registration Number: S12830 & S15160, Water Efficiency Star rating: 3, Nominal Flow Rate 7.83 & 8.14 Toilet: WELS Registration Number: L07055, Efficiency Star Rating 4, Water Consumption Full Flush 4.5 L / Half Flush 3 L Sink: WELS Registration Number: T38665, Water Efficiency Star rating: 5, Nominal Flow Rate 4.86 NOTE: Unit

Includes: - Sink - Toilet - Extractor fan & lights Toilet: WELS Registration Number: L07055, Efficiency Star Rating 4, Water Consumption Full Flush 4.5 L / Half Flush 3 L Sink: WELS Registration Number: T38665, Water Efficiency Star rating: 5, Nominal Flow Rate 4.86 Approximate Shipping Dimensions: 1100mm L x 1300mm W x 2400mm H Approximate Weight: 270kgs NOTE: Customer must arrange a licensed Electrician to supply & Install all wiring. Single Cubicle Toilet Block is located in Toowoomba, Q

To Suit Skid Steer Comes with 1 x 12 Inch Auger Required Operating Flow: 50-75 L/min Operating Pressure: 16MPa Approximate Shipping Dimensions: 1210mm L x 1110mm W x 810mm H Approximate Weight: 240kg Auger Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Cutting Width: 1828mm Required Operating Flow: 75-115L/min Operating Pressure: 16MPa Approximate Shipping Dimensions 2333mm L x 1942mm W x 560mm H Approximate Weight: 396kg **NOTE: UNIT REQUIRES OIL TO BE ADDED TO THE GEARBOX BEFORE USE Brush Cutter Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Bucket Capacity: 0.35 Cubic Metres Required Operating Flow: 75 – 140L/m Operating Pressure: 16-21 MPA Model Type 1 Approximate Shipping Dimensions: 1700mm L x 920mm W x 800mm H, Approximate Weight: 525kg Concrete Mixer Bucket Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

Model: EXEQ530 To Suit both Skid Steers and/or 2.5-4 Ton Excavators Side mount for Skid Steers / Top Mount for Excavators Can be used as both Post Driver & Rock Breaker Operating Pressure: 90-120 bar Hydraulic Flow: 25-50 Litres per minute Frequency – 600-1000 bpm Comes with: 1 x Post Driver & 2 x Chisels Each unit comes with a separate heavy duty mounting plate for Skid Steers To be attached by buyer Approximate Plate Dimensions 1180mm x 480mm, 180Kgs Shipping Dimension: L: 127cm x W: 55cm x

To suit Skid Steer 1200mm Long Forks Approximate Shipping Dimensions: 1240mm L x 1430mm W x 880mm H Approximate Weight: 105kgs Forks Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

2 x Seperate Cubicles Included in each cubicle: – Sink – Toilet – Extractor Fan – Lights Toilet: WELS Registration Number: L07055, Efficiency Star Rating 4, Water Consumption Full Flush 4.5 L / Half Flush 3 L Sink: WELS Registration Number: T38665, Water Efficiency Star rating: 5, Nominal Flow Rate 4.86 NOTE: Units do not come wired. Customer must arrange a licensed electrician to supply & install all wiring. Approximate Shipping Dimensions: 2160mm L x 1300mm W x 2360mm H Approximate Weight:

Model: 0207 Includes: 8 Sliding lockable Windows 1 x Door Timber look flooring Gas Struts and winches for easy assembly Size when opened out: 15ft x 20ft Adjustable feet for easy levelling Unit is folded up ready for Transport Approximate Shipping Dimensions: 5850mm L x 750mm W x 2500mm H Approximate Weight: 2650kg Portable Foldout House is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Shipping Dimensions:1960mm L x 1055mm W x 790mm H Weight: 240kg 4 in 1 Bucket Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit 5-8 Ton Excavators Approximately 1090mm Wide Approximate Shipping Dimensions: 2200mm L x 380mm W x 590mm H Approximate Weight: 163kg Stick Rake Excavator Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer 1800mm Wide 0.4 Cubic meter Capacity Required Operating Flow: 50 – 125L/m Operating Pressure: 16MPA Approximate Shipping Dimensions: 2240mm L x 1365mm W x 785mm H Approximate Weight: 520kg Sweeper Broom Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

Unused Medium Levelling Bar to suit Skid Steer / Loader Approximately 2000mm wide x 1500mm long, with grabs made from 50 x 50 heavy wall box Approximate Shipping Dimensions: 2000mm L x 1500mm W x 20mm H Approximate Weight: 60kg

To Suit both Skid Steers and/or 6-8 Ton Excavators Model: EXEQ750 Side mount for Skid Steers / Top Mount for Excavators Can be used as both Post Driver & Rock Breaker Operating Pressure: 120-170 bar Hydraulic Flow: 50-90 Litres per minute Frequency - 400-800 bpm Comes with 1 x Post Driver & 1 x Chisel Weight: 450kg Hydraulic Skid Steer / Excavator Post Driver is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer 1830mm wide Approximate Shipping Dimensions: 1950mm L x 1060mm W x 600mm H Approximate Weight: 190kg Rock Bucket Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Vibration Frequency: 2600Vpm Vibration Force: 3880kg Drum Diameter: 600mm Drum Width: 1855mm Approximate Shipping Dimensions: 2150mm L x 950mm D x 630mm H Approximate Weight: 860kg Vibratory Roller Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Heavy Duty Cutting Edge 1825mm W Title Angle: 22.5 degrees Operating Pressure: 16MPa Shipping Dimensions: 1930mm L x 1060mm W x 740mm H Weight: 310kgs Levelling Blade Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

To Suit Skid Steer Digging Width: 200mm Digging Depth: 900mm Required flow: 50-75L/min Approximate Shipping Dimensions: 1900mm L x 1240mm W x 790mm H Approximate Weight: 360kg Trencher Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.

Unused Tiller Attachment To Suit Skid Steer, 1850mm Wide Operating Pressure: 16-21 MPA Scarifying Width: 1520mm Scarifying Depth - Adjustable from 0mm to 120mm The required flow is from: 50lpm to 75lpm Approximate Shipping Dimensions: 2180mm L x 740mm W x 720mm H Approximate Weight: 360kg

To Suit Skid Steer Tree / Fence Post Puller Skid Steer Attachment is located in Toowoomba, QLD. NO Delivery Available.