0 Results: New & Used in komatsu excavator in Kingsholme 4208, QLD

The price includes GST. New Agrotk EXRC-54 Excavator Rotary Brush Cutter Slasher Mower suit 3-10 Ton machine. Great for mowing steep banks, around ponds & dams, cutting back brush on roadways and trails, reaching over fences and guardrails etc. Direct drive one-way check valve hydraulic motor. Skid rails run along the entire mower deck sides. Hydraulic hoses and 1/2" flat faced Quick Connect Couplers included (see Pic #10). Cutting Width: 54" (1372mm). Cutting Height: 1.6" (41mm). Blades: 2.

Price includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame

The price includes GST. New Miva VA130 0.8 ton Diesel Excavator with Auxiliary Lines Features: * Genuine Koop KD192FC-1 499cc 13.5HP Direct Injection Diesel Engine. * Rain & Shade Canopy. * Front Dozer push Blade. * Battery Isolator (red handle near engine as seen in Pic# 8). * Hydraulic Oil Level & Temperature Window on right side. * LED Work Light on the Boom. * Adjustable Seat & Seat Belt. * 1 spare set of additional Auxiliary Hydraulic Lines on boom with lever controller to run an optiona

The price includes GST. New price around $11,500. 2 barely used (95% left) Genuine Komatsu PC95 Excavator Rubber Crawler Shoe Assembly Tracks 450x76x84. Condition is used, there is some light wear on the inside where the drive wheel teeth pull the track, but the outside tread pattern has barely worn at all (5% used). Width of the track: 450mm Length of Pitch: 76mm Number of Links: 84 Gauge (width between the Lugs): 54-55mm Overall internal Circumfrence: 6384mm (76mm x 84) Made in the Europe

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

Price includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.

The price includes GST. New 200mm Excavator Digging & Trenching GP Bucket suit 1-3 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Some buckets have the manufacture's nameplate affixed, some do not, but all are the same. We have this bucket in 2 different Headstock Configurations: *** 1st Headstock configuration: 30mm Pin Diameter, 124mm Pi