180 views
Turbo 700 R-4 Th700 R-4 GM Performance Rebuilt Overdrive Transmission
$2,990 Negotiable
Turbo 700 R-4 Th700 R-4 GM Performance Rebuilt Overdrive Transmission
Please call ******** 042 for more information.
For racing enthusiasts, our last shipment from the United States containing 150 mixed transmissions are being allocated. Secure your transmission today.
This transmission is designed for a performance street application. It is built stronger than stock with upgraded components. This transmission is also designed to have a nice "firm" shift but still tame enough to be driven daily without breaking your neck.
The same care that we take to assemble our engines is used to remanufacture our transmissions.
Everyone of our transmission goes through the following:
Teardown where the transmission is disassembled to a bare case and its components, including the removal of bushings and disassembly of the valve body
- The bare case is cleaned in a aluminium jet cleaner and has the passages further cleaned using compressed air, while the valve body and its parts that are to be reused are thoroughly cleaned
- The cleaned case is then inspected for cracks, pin holes or wear. The valve body surfaces are checked and machined as necessary, while the valves are checked for drag to ensure correct smooth operation
- The turbine fins are inspected, retightened and welded. The hubs are carefully inspected and replaced as needed. Washers, spacers, springs, rollers and new relined clutch piston is then installed.
Features:
- B&M Stage Two Shift Kit
- Borg Warner High Energy Clutches
- Raybestos Clutch Pack
- Remanufactured Pump assembly
- New Kevlar Bands and Bushings
- New Transtec Gaskets
- New Nylon Filters
- Kolene Steel Plate Modules
- Heavy Duty Steel Plate Drums
- Adjustable Modulator
- 300 HP up to 500 HP depending on application setup
- Dyno Tested
- 6 Month Warranty
Please call ******** 042 for more information.
For racing enthusiasts, our last shipment from the United States containing 150 mixed transmissions are being allocated. Secure your transmission today.
This transmission is designed for a performance street application. It is built stronger than stock with upgraded components. This transmission is also designed to have a nice "firm" shift but still tame enough to be driven daily without breaking your neck.
The same care that we take to assemble our engines is used to remanufacture our transmissions.
Everyone of our transmission goes through the following:
Teardown where the transmission is disassembled to a bare case and its components, including the removal of bushings and disassembly of the valve body
- The bare case is cleaned in a aluminium jet cleaner and has the passages further cleaned using compressed air, while the valve body and its parts that are to be reused are thoroughly cleaned
- The cleaned case is then inspected for cracks, pin holes or wear. The valve body surfaces are checked and machined as necessary, while the valves are checked for drag to ensure correct smooth operation
- The turbine fins are inspected, retightened and welded. The hubs are carefully inspected and replaced as needed. Washers, spacers, springs, rollers and new relined clutch piston is then installed.
Features:
- B&M Stage Two Shift Kit
- Borg Warner High Energy Clutches
- Raybestos Clutch Pack
- Remanufactured Pump assembly
- New Kevlar Bands and Bushings
- New Transtec Gaskets
- New Nylon Filters
- Kolene Steel Plate Modules
- Heavy Duty Steel Plate Drums
- Adjustable Modulator
- 300 HP up to 500 HP depending on application setup
- Dyno Tested
- 6 Month Warranty
- Date Listed:04/04/2024
- Last Edited:04/04/2024
- Condition:New
Similar Ads
- TH700 Standard or Performance rebuildsWe can rebuild your TH700 as standard from factory or for a performance application with options of a stage 2 valve body or full manual With every build we carry out a complete overhaul, clean and inspect every component to check for any abnormal wear or damage. Then reassembled with quality parts including gaskets, sealing rings, o rings, bushes, frictions and band We supply reconditioned or high stall converters and also aftermarket trans coolers which are ideal in keeping your transmission$2,800Moorebank, NSW•101w
- Iron LS 5.3 Boost Turbo , Long motorHello, I have this ls 5.3 iron it has been built for boost application. GEN4 type rods these SBE live happily 700-800 on the right tune. The motor was stripped down inspected and cleaned bores honed for fresh rings. New rings gapped to .028 on top and .028 2nd. New Mahle bearings mains & rods and cam clearances checked, New mellings Oil pump and girdle. New Trickflow SS2 camshaft plenty online regarding this cam. New timing set, Ls7 lifters and trays. Heads have been serviced and Pac 1218 spri$10,000NegotiableSydney Region, NSW•4d
- Mazda 323 Familia GTX/GT/SS BF Spare partsI have pretty much all the parts for BF Mazda 323 Familia/GTX/SS (models******1988) including: - Performance parts such as bolt on bigger hybrid turbos ( 260HP), BOVs,Boost controllers, etc - B6T 1.6L Turbo engine parts - Rebuilt B6T 4WD gearboxes and spare parts (Casings, Centre Diff, Transfer case, gearsets, syncros, shifter cables) - Suspensions, springs and linkages - Wheels (factory and aftermarket) - Interior bits If you are looking for anything send me a message or call me. Locat$5NegotiableChatswood, NSW•139w
- FORD C4 STREET/STRIPThese C4/C10s are purpose built for street and strip use or even burnout comps They consist of •5 Performance frictions in the Forward clutch drum • 5 Performance frictions in the Direct clutch drum •new steels •heavy duty intermediate band • new rear band • new rear servo piston • new o rings, seals and gaskets •reconditioned oil pump • full manual or automatic valve body with new filter I can also supply aftermarket bellhousings to suit most engines Stall converter to suit your engine com$2,800Moorebank, NSW•365w
- Ford Falcon XR6 4.0L BARRA Turbo 12mm Head Stud Kit 220,000 PSINEW from 4 Tune Performance Parts Our BARRA 12mm Head Stud Kit This Kit is not like many on the market Each one one of these studs are made from Aircraft quality high tensile strength chromoly steel and cold-forged to ensure molecular integrity and then heat-treated prior to thread rolling to ensure they achieve a strength rating of 220,000 psi, with over sized washers and 12 point over sized nuts makes them to stop the known problem with smaller washers, makes these perfect for people looking$205Smithfield, NSW•46w
- HOLDEN-COMMODORE-308-304-253-ENGINE-BLOCK-PATTERN-RE-DRILLS-TO-THolden/Commodore 308 / 304 or 253 Block Re-drills To Turbo or Trimatic Pattern This is not an add for a block This is to have your 308 / 304 or 253 block re-drilled Aussie 4 Speed/Tri-matic pattern To Turbo/350/400/700 or Power Glide Pattern OR Turbo/350/400/700 or Power Glide pattern To Tri-matic Pattern/Aussie 4 Speed WHICH EVER WAY YOU NEED IT. To drill a pattern change I need minimum of block and crank to set up on or I can do short blo$275Windsor, NSW•348w
- 6R80 ZF 6hp26 Conversion XR6 XR6T XR8The ZF 6hp26 is a strong automatic transmission from factory that can handle some decent power levels with the rite transmission tune. But when you start make some big power figures the ZF input shaft is the weakest link. That’s when the 6R80 input shaft is required. By adding the larger 6R80 input shaft into your ZF the transmission candle handle a lot more power, abuse, track time, drag racing and firmer shift points and gear changes without snapping the input shaft. Along with the 6R80 inp$6,500Moorebank, NSW•216w
- SUBARU LIBERTY TRANS/GEARBOX, AUTO, 4WD, PETROL, 09/03-08/09, ST4614S Twins Auto Parts has the following part available: Subaru Liberty Transmission/Gearbox, Automatic, 4WD, Petrol, 2.5, EJ25, Non-turbo, VDC type, TV1B8MCEBA TAG, 4th Gen, 09/03-08/09, ST4 07 08 09 TAG# 160566 If you have any specific inquiries about this part or other parts they have available, feel free to message them. They offer a variety of parts for different makes and models, and they provide pick-up and delivery services for your convenience. Contact Information: Sydn$500Smithfield, NSW•15w
- SUBARU LIBERTY TRANS/GEARBOX, AUTO, 4WD, PETROL, 09/03-08/09, ST1205S Twins Auto Parts has the following part available: Subaru Liberty Transmission/Gearbox, Automatic, 4WD, Petrol, 2.5, EJ25, Non-Turbo, VDC Type, TV1B8MCEBA Tag, 4th Gen, 09/03-08/09, ST1205 03 09 OEM PART NUMBER: TV1B8MCEBA TAG# 52626 If you have any specific inquiries about this part or other parts they have available, please feel free to message them. They have a wide range of parts for various makes and models, and they offer pick-up and delivery services for your conveni$500Smithfield, NSW•15w
- FORD FALCON XR6 BF 4.0L BARRA TURBO ENGINE CONVERSIONFORD BARRA 4.0L TURBO ENGINE CONVERSION, THESE ARE SECOND HAND TESTED ENGINES, COME WITH 3 MONTHS WARRANTY IF USED FOR STANDARD APPLICATIONS ENGINE WILL COME WITH TURBO, MANIFOLDS, POWER STEER PUMP, ALTERNATOR, WIRING, 6 SPEED AUTOMATIC TRANSMISSION EVERYTHING EXCEPT ECU PICTURES ARE FOR ILL ILLUSTRATION PURPOSES ONLY. CHECK OUT OUR OTHER ITEMS TO UPGRADE THIS ONE TODAY NOTE WE HAVE OTHER LPG AND TURBO ENGINES ALSO AVAILABLE CONTACT US FOR MORE DETAILS https://4tuneperformance.com.a$9,501Smithfield, NSW•60w
- Coan Racing Turbo 400 Manual Valve Body Reverse Pattern PRN123 #22010Coan Racing Turbo 400 Manual Valve Body Reverse Pattern PRN123 #22010 TH400 Manual Valve Body Kit Components: - Valve body - Separator plate - Gaskets - Special manual valve - Modulator plug w/o-ring - Rear accumulator spring Coan Racing Manual Valve Bodies are for competition applications, they will provide full manual control over all shifts, and deliver without delay or time costly overlap. The manual vale body is used when the transbrake is not needed, such as bracket racing, tractor pull$795NegotiableCampbelltown, NSW•1w
- TH400 Turbo 400 Transmission Fully Reco with Stage 2 ShiftkitTH400 Turbo 400 Transmission Fully Reco with Stage 2 Shiftkit Please call for more information. For racing enthusiasts, our last shipment from the United States containing 150 mixed transmissions are being allocated. Secure your transmission today.$3,590NegotiableCampbelltown, NSW•3w
- Ford GT Falcon Top Loader Transmission NewFord GT Falcon Top Loader Transmission New Please call for more information. For racing enthusiasts, our last shipment from the United States containing 150 mixed transmissions are being allocated. Secure your transmission today.$2,590NegotiableCampbelltown, NSW•3w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 0042