2387 views
Chrysler Jeep 300C with Hemi V8 5.7 / 6.1L Engine Supercharger Kit
$5,400
2.4L INTERCOOLED WHIPPLE VALLEY KIT – BY YELLATERRA
Suits Chrysler Jeep or 300C with Hemi V8 5.7 / 6.1L Engines
Unique chance to purchase this complete Whipple 2.4L twin-screw, dual intercooled engine valley assembly and drive.
Ideal for your everyday factory Hemi V8 vehicle or that Hemi Create Engine Transplant you have planned for your project car.
Was run on a 6.1L 300C SRT for about three years as a daily driver.
Kit has been cleaned and re-assembled with new sealant and o-rings - I’m only selling it because of upgrading to a new Gen5 unit.
Kit will fit under bonnet on all Jeep and 300C model vehicles.
The 6Rib drive system bolts to the engine and runs the supercharger in-loop with your accessories with a longer belt. Your factory throttle body will bolt directly to the side intake pipe of the supercharger, and only a simple intake tube will be required to connect the throttle to your intake box. (not supplied) Billet fuel rails and brackets are supplied to take factory length injectors, a fuel crossover hose with dash fittings will be required. (not supplied)
This kit is supplied with YellaTerra’s revised designed duel intercooler cores for better AIT’s and already assembled inside the manifold with sealed inlet and outlet fittings.
All that is required extra is the I/C front heat exchanger radiator, i/c pump & reservoir canister which are still sold separately by Yella Terra in Melbourne.
Note: This package for sale may require extra parts and fitting to complete a install to your particular vehicle.
Assembly Includes:
• 2.4L Whipple Twin-Screw Blower - pre assembled on manifold ready to install.
• CNC Machined Inlet Manifold – for small and large port heads.
• Dual Core design intercoolers already set up & sealed in Manifold with inlet/outlet fittings.
• Rear Supercharger Intake machined to suit factory throttle.
• Built in large 1.5” Bypass System
• Billet Fuel Rails & mounts for long style injectors & billet engine oil filler
• Billet Blower Snout to suit multiple boost pulley sizes - includes 71mm 6 rib drive pulley
• Billet 6rib in-loop drive mounting plate and idlers
Note: (engine bay) Image for illustration purposes only. Remaining images are of the kit you will receive.
The Kit is capable of giving you 50% power and torque gain with the right install & tune.
* KIT DOES NOT INCLUDE INJECTORS & WILL REQUIRE A TUNE *
* KIT DOES NOT INCLUDE JOINING FUEL LINE FOR FUEL RAILS*
* KIT DOES NOT INCLUDE FRONT INTERCOOLER RADIATOR OR RESERVOIR CANISTER FOR I/C SYSTEM *
* KIT DOES NOT INCLUDE SUPERCHARGER OIL - REQUIRED BEFORE OPERATION *
Suits Chrysler Jeep or 300C with Hemi V8 5.7 / 6.1L Engines
Unique chance to purchase this complete Whipple 2.4L twin-screw, dual intercooled engine valley assembly and drive.
Ideal for your everyday factory Hemi V8 vehicle or that Hemi Create Engine Transplant you have planned for your project car.
Was run on a 6.1L 300C SRT for about three years as a daily driver.
Kit has been cleaned and re-assembled with new sealant and o-rings - I’m only selling it because of upgrading to a new Gen5 unit.
Kit will fit under bonnet on all Jeep and 300C model vehicles.
The 6Rib drive system bolts to the engine and runs the supercharger in-loop with your accessories with a longer belt. Your factory throttle body will bolt directly to the side intake pipe of the supercharger, and only a simple intake tube will be required to connect the throttle to your intake box. (not supplied) Billet fuel rails and brackets are supplied to take factory length injectors, a fuel crossover hose with dash fittings will be required. (not supplied)
This kit is supplied with YellaTerra’s revised designed duel intercooler cores for better AIT’s and already assembled inside the manifold with sealed inlet and outlet fittings.
All that is required extra is the I/C front heat exchanger radiator, i/c pump & reservoir canister which are still sold separately by Yella Terra in Melbourne.
Note: This package for sale may require extra parts and fitting to complete a install to your particular vehicle.
Assembly Includes:
• 2.4L Whipple Twin-Screw Blower - pre assembled on manifold ready to install.
• CNC Machined Inlet Manifold – for small and large port heads.
• Dual Core design intercoolers already set up & sealed in Manifold with inlet/outlet fittings.
• Rear Supercharger Intake machined to suit factory throttle.
• Built in large 1.5” Bypass System
• Billet Fuel Rails & mounts for long style injectors & billet engine oil filler
• Billet Blower Snout to suit multiple boost pulley sizes - includes 71mm 6 rib drive pulley
• Billet 6rib in-loop drive mounting plate and idlers
Note: (engine bay) Image for illustration purposes only. Remaining images are of the kit you will receive.
The Kit is capable of giving you 50% power and torque gain with the right install & tune.
* KIT DOES NOT INCLUDE INJECTORS & WILL REQUIRE A TUNE *
* KIT DOES NOT INCLUDE JOINING FUEL LINE FOR FUEL RAILS*
* KIT DOES NOT INCLUDE FRONT INTERCOOLER RADIATOR OR RESERVOIR CANISTER FOR I/C SYSTEM *
* KIT DOES NOT INCLUDE SUPERCHARGER OIL - REQUIRED BEFORE OPERATION *
- Date Listed:02/04/2024
- Last Edited:09/04/2024
- Condition:Used
- Warranty:No
- Make:Chrysler
Similar Ads
- Mopar Pistol Grip 4 speed shifter & console66-70 B body Mopar 4 speed set up. Original console style hurst Shifter has been rechromed Mechanism all rebuilt Original console in good shape. $2800 ono for all. Located SE Melbourne Chrysler Plymouth Dodge Mopar Jeep Hemi Charger super bee coronet road runner valiant hurst$2,800Mulgrave, VIC•9w
- EVC THROTTLE CONTROLLER FOR JEEP 3Y5 EZB EZD ESG EZH HEMI S/C V8MACE ENGINEERING GROUP EVC ELECTRONIC THROTTLE CONTROLLER TO SUIT JEEP 3Y5 EZB EZD ESG EZH HEMI SUPERCHARGED 4.7L 5.7L 6.2L 6.4L V8 Vehicle Fitment: Commander XK XH, Grand Cherokee WK For further details, please refer to the vehicle fitment guide in the above images. Part Numbers: ETC845, ETC868 Please confirm which part number you require by utilising our vehicle fitment guide in the above image. Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & posi$245Melbourne CBD, VIC•236w
- K&N REPLACEMENT AIR FILTER FOR JEEP XH WH WK JK V8 (05-ON)MACE ENGINEERING GROUP K&N REPLACEMENT AIR FILTER TO SUIT JEEP EZB 3Y5 EVA ESF XY EZD EZH EGT ERB ESG HEMI SUPERCHARGED 3.6L 3.8L 4.7L 5.7L 6.1L 6.2L 6.4L V8 Vehicle Fitment: Commander XH, Grand Cherokee WH WK, Wrangler JK Part Numbers: AF822 ($110), AF826 ($80), AF827 ($125) Please confirm which part number you require by utilising our vehicle fitment guide and parts guide in the above images. Applicable prices are mentioned next to the part numbers This K&N replacement air filter is d$80Melbourne CBD, VIC•232w
- Aluminum Radiator for Chrysler Valiant VG HEMI 6 CylAluminum Radiator for Chrysler Valiant VG HEMI 6 Cyl Core Size: 540mm*430mm*40mm, Overall Size: 645mm*560mm*125mm, I/O: 38/38mm, 2 Row Payment: Paypal, Pickup by Cash, Pay to our bank account, Pay on the phone by Credit Card. Brand New In Box Welcome to pick up from Melbourn Warehouse. Free shipping to most areas in Australia. Ship to NT, Remote WA & Regional QLD areas may need extra charge. Customers hold full responsibility to provide valid delivery information befor$295Hoppers Crossing, VIC•205w
- 426 Hemi Indy Intake manifoldGen 2 426 Hemi intake. Indy IC-20. w/ 4500 flange. In very good order Pick up 3170 or can ship. Chrysler Plymouth Dodge Mopar Hemi Charger Challenger Cuda Barracuda hotrod muscle car sled 331 392 354$1,000Mulgrave, VIC•49w
- MACE SUPERCHARGER PULLEY HOLDEN L67 SUPERCHARGED 3.8L V6MACE ENGINEERING GROUP MACE SUPERCHARGER PULLEY TO SUIT HOLDEN L67 SUPERCHARGED 3.8L V6 Vehicle Fitment: Calais VS VT VX VY, Caprice VS WH, Commodore VT VX VY, Monaro V2, Statesman VS WH WK Part Numbers: PLY602 ($120), PLY603 ($120), PLY604 ($120), PLY605 ($120), PLY606 ($120), PLY607 ($120), PLY608 ($120), PLY609 ($120), PLY610 ($120), PLY613 ($120), PLY614 ($120), PLY615 ($120), PLY636 ($145) (PLY604 is out of stock) Please confirm which part number you require by utilising our vehicle f$120Melbourne CBD, VIC•306w
- MACE SUPERCHARGER PULLEY HSV LSA SUPERCHARGED 6.2L V8MACE ENGINEERING GROUP MACE SUPERCHARGER PULLEY TO SUIT HSV LSA SUPERCHARGED 6.2L V8 Vehicle Fitment: ClubSport R8 VF, GTS VF, GTSR VF, Maloo VF, Senator VF Part Numbers: PLY803, PLY804, PLY805, PLY806, PLY807 Please confirm which part number you require by utilising our vehicle fitment guide and parts guide in the above images. Our Mace LSA supercharger boost pulleys are available in a variety of sizes from 2.8" down to 2.4". These pulleys are capable of generating 10 to 14 psi of boost$100Melbourne CBD, VIC•324w
- Charger Chrysler Valiant Dodge Mopar Factory VH Emaill AlternatorCharger Chrysler Valiant Dodge Mopar Factory VH Emaill Alternator Suit Reco Came from a hemi 6 VH sedan. Pickup Melbourne or Mount Evelyn Can post$55Mount Evelyn, VIC•58w
- AIR TO AIR INTERCOOLER FITMENT KIT HOLDEN L67 S/C 3.8L V6 (97-04)MACE ENGINEERING GROUP AIR TO AIR (A2A) INTERCOOLER FITMENT KIT TO SUIT HOLDEN L67 SUPERCHARGED 3.8L V6 (97-04) Vehicle Fitment: Calais VT VX VY, Caprice WH, Commodore VT VX VY, Monaro V2, Statesman WH WK For further details, please refer to the vehicle fitment guide in the above image. Part Number: AA602 This air-to-air (A2A) intercooler adapter plate fitment kit is ideal when customizing the intercooler setup on your L67 build while still utilizing our A2A plate or one with the identi$270Melbourne CBD, VIC•323w
- ARP HEAD STUD KIT FOR HOLDEN LS1 5.7L V8 TILL 09/2003MACE ENGINEERING GROUP ARP HEAD STUD KIT TO SUIT HOLDEN LS1 5.7L V8 TILL 09/2003 Vehicle Fitment: Calais VT VX VY, Caprice WH WK, Commodore VT VU VX VY, Crewman VY, Monaro V2, One Tonner VY, Statesman WH WK For further details, please refer to the vehicle fitment guide in the above image. Part Number: ARP801 ARP head studs greatly improve head-to-block sealing, which is important in engines with high power adders such as turbochargers, superchargers or nitrous. They can even be a great a$715Melbourne CBD, VIC•304w
- Dodge Other Manual Coupe (2 door)
- 85645 km
- Coupe (2 door)
- Manual
1937 DODGE D5 BUSINESS COUPE-2 DOOR-- ALL Steel DODGE Body Business Coupe This car is in its original form (Copper Orange)and very solid rust free body. In the front has a new split-grille and chrome throughout. Standard equipment included all-steel disc-type wheels, 'No-Draft' ventilation, hydraulic brakes, Autolite ignition, 16-gallon fuel tanks, dual taillights. Power is from a six-cylinder engine displaced 218 cubic-inches and breathed through a single barrel carburettor that helped it prod$55,000Clayton South, VIC•15m - Magnafuel Quick fuel pumpMagnafuel Quick fuel pump star 275 with FILTER. Used only once for testing engine..ProStar 275 Highperformance when rated atflow vs. pressure External by-pass to eliminatepump cavitation Instantaneous compensationfor sudden changes in fueldemand Consistent,reliable fuel supply foroptimum carburettorperformance Compatible with both alcoholand gasoline racing fuels Light weight Handassembled to the highestquality standard Pumpbodies computer machined outof high quality 6061Aluminium Custombuilt$750Clayton, VIC•6d
- Holden Commodore Supercharger - Valley KitHolden Commodore Supercharger kit - LS3 L98 L76 (and LS1 With required Adaptors) Intercooled ready Yella Terra - Whipple Valley Kit Give you around 60% power to the rear Was run on a 6.0L VE Commodore SS for about three years as a daily driver. Kit has been cleaned and re-assembled with new sealant and o-rings - I’m only selling it because I’m upgrading to a new Gen5 unit. Kit will fit under bonnet on all early VT-VZ body shaped Commodores and later VE - VF LS3 Commodores. The 6Rib drive pl$5,500Clayton South, VIC•6d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 2857
1 offer has already been made