65 views
Adaptec AHA-1542CP ISA to Fast SCSI Host Adapter
$55
SHIPPING OFFERED
Hi I have for sale a used Adaptec AHA-1542CP ISA High Performance Bus Master Host Adapter with SCSISelect Utility, Floppy Support and Plug-and-Play Functionality.
It has been in storage and may have scuff marks.
DESCRIPTION
Adaptec AHA-1542CP ISA SCSI Interface Adapter PC PCB Circuit Board
ASSY 598706-00
FCC ID: FGT1542CP
MFG #: AHA-1542CP
TECHNICAL SPECIFICATIONS
Computer Bus: ISA
Interface Protocol: Bus master DMA
Host Bus Burst Data Rate: 10 MByte/sec
Peripheral Bus: 8-bit SCSI
SCSI Synchronous Data Rate: 10 MByte/sec
SCSI Asynchronous Data Rate: 3 MByte/sec
Device Protocol: SCSI-1, SCSI-2
Advanced SCSI Features: -Advanced SCSI Programming Interface (ASPI) compliant
-Multithreaded I/O
-Scatter-gather
-Disconnect/reconnect
-SCSI plug and play
-Synchronous and asynchronous data transfer
External Connector: 50-pin, high density
SCSI Termination: Single-ended, active, programmable via SCSISelect
Hard Disk Capacity: Up to 8 GBytes per disk
Device Support: Up to 7 devices under DOS 5.0 and above
Operating Environment: Microsoft®
Windows 95, Windows 3.1, Windows NT,
Windows for Workgroups, DOS, IBM OS/2 2.x and 3.x, Novell
NetWare 3.12 and 4.x, SCO Unix 3.2.x, UnixWare 1.x and 2.x,
Banyan Vines, and Sunsoft Solaris
Floppy Drive Support: supports two floppy drives (3.5 in. and 5.25 in.)
PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0° C to 55° C
Storage Temperature: -55° C to 85° C
Humidity (operating): 10% to 90%, non condensing
MTBF (AHA-1540): 376,130 hours (Bellcore TR-NWT-000332, Method I, QL-I)
Power Requirements: 5.0 ± 0.25 volts at 0.51 amps, excluding terminator power.
Length: 6.3 inches (16.5 cm)
Height: 4.5 inches (11.4 cm)
IF YOU CAN SEE AN ITEM IT IS AVAILABLE, PLEASE DON'T ASK IF IT IS AVAILABLE AS GUMTREE SUGGESTS WHICH WASTES TIME, SOMEONE ELSE MAY BUY IT IN THE MEANTIME.
Happy to post Australia wide with tracking and insurance if required at the buyers expense.
See my other ad's for more items.
It has been in storage and may have scuff marks.
DESCRIPTION
Adaptec AHA-1542CP ISA SCSI Interface Adapter PC PCB Circuit Board
ASSY 598706-00
FCC ID: FGT1542CP
MFG #: AHA-1542CP
TECHNICAL SPECIFICATIONS
Computer Bus: ISA
Interface Protocol: Bus master DMA
Host Bus Burst Data Rate: 10 MByte/sec
Peripheral Bus: 8-bit SCSI
SCSI Synchronous Data Rate: 10 MByte/sec
SCSI Asynchronous Data Rate: 3 MByte/sec
Device Protocol: SCSI-1, SCSI-2
Advanced SCSI Features: -Advanced SCSI Programming Interface (ASPI) compliant
-Multithreaded I/O
-Scatter-gather
-Disconnect/reconnect
-SCSI plug and play
-Synchronous and asynchronous data transfer
External Connector: 50-pin, high density
SCSI Termination: Single-ended, active, programmable via SCSISelect
Hard Disk Capacity: Up to 8 GBytes per disk
Device Support: Up to 7 devices under DOS 5.0 and above
Operating Environment: Microsoft®
Windows 95, Windows 3.1, Windows NT,
Windows for Workgroups, DOS, IBM OS/2 2.x and 3.x, Novell
NetWare 3.12 and 4.x, SCO Unix 3.2.x, UnixWare 1.x and 2.x,
Banyan Vines, and Sunsoft Solaris
Floppy Drive Support: supports two floppy drives (3.5 in. and 5.25 in.)
PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0° C to 55° C
Storage Temperature: -55° C to 85° C
Humidity (operating): 10% to 90%, non condensing
MTBF (AHA-1540): 376,130 hours (Bellcore TR-NWT-000332, Method I, QL-I)
Power Requirements: 5.0 ± 0.25 volts at 0.51 amps, excluding terminator power.
Length: 6.3 inches (16.5 cm)
Height: 4.5 inches (11.4 cm)
IF YOU CAN SEE AN ITEM IT IS AVAILABLE, PLEASE DON'T ASK IF IT IS AVAILABLE AS GUMTREE SUGGESTS WHICH WASTES TIME, SOMEONE ELSE MAY BUY IT IN THE MEANTIME.
Happy to post Australia wide with tracking and insurance if required at the buyers expense.
See my other ad's for more items.
- Date Listed:21/02/2023
- Last Edited:21/02/2023
- Condition:Used
- Shipping:Shipping & Pickup
- RAASC Service Dress Uniform Jacket and BadgesHi I have a RAASC Service Dress Uniform Jacket, Badges, Buttons and belt. Jacket has hole in sleeve and is very dusty as shown in the photo. Badges, buttons and belt buckle have no damage. The belt and brass buckle is included. They have been in storage and may have scuff marks. The badges are - 2 x Australian Commonwealth Military Forces Lapel Badges The third pattern - May 1904 The third pattern Rising Sun badge carried a scroll inscribed with the words Australian Commonwealth Military ForceSHIPPING OFFEREDNegotiableTweed Heads West, NSW•2w
- Monastery Cast Brass Door BellHi I have a Large Ornate Solid Brass Hanging Wall Mounted Monastery Door Bell including a Pull Handle and Chain and mount. The bell and its fixtures have hammering, worn casting detail and ornate figures of angels and creatures adorn the bell. They were used at Monastery entrances, Houses and Pubs. The Latin writing around the top of the bell, "QUI ME TANGIT VOCEM MEAM AUDIT", translates to "He Who Touches Me, Hears My Voice". There is a chain and pull handle which when pulled produces a wonder$295SHIPPING OFFEREDTweed Heads West, NSW•2w
- Kriesler Mantel Valve Radio Compact 1960sHi I have for sale a used Vintage Kriesler Mantel Valve Radio. It has been in storage and may have scuff marks, see photos. I have discovered a small (15mm long) crack in the top of the case near the centre that I did not notice when cleaning or photographing it initially. I have tested it with a multimeter for safety and found no faults. When you turn the volume control to the ON position the light behind the Station Selector Dial functions. I did not want to leave it running without being cheSHIPPING OFFEREDNegotiableTweed Heads West, NSW•2w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here