39 Results: excavator great in Brisbane Region, QLD

Kanga slewing front hoe for mini skid steers – excellent condition (like new) – 300mm bucket with replaceable tiger teeth x3 – left and right slewing capability – rock grab option available (sold separately) to replace the bucket – poppet couplers (exchange for flat-face couplers will incur a small additional charge). If your jobs require trench digging and you’re not quite ready for a small excavator (logistically or in terms of cost), then a slewing front hoe for your mini skid steer is a gr

The price includes GST. Used, Solid, Heavy Duty Excavator Ripper, suit 22-36 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. Current Headstock configuration: 90mm Pin Diameter, 530mm CtoC (pin Center to pin center), 335mm BTE (Between The Ear plates). Should fit: Kato 1220SE2 / 1250SE / HD700SEV / HD900SEV. Maybe fit: Case CX240 / CX290, Kato HD1430, Kobelco SK220 / SK230 / SK2

Price includes GST. New Jea Wen JW530 Excavator Hydraulic Hammer Rock Breaker to suit: 2-5 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 52mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. Required Oil Flow: 25-45 L/min. Current Headstock Setup: * The Hitch Headstock currently has 40mm Pins fitted into collar bosses that

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

Price includes GST. Unused Mustang HM1000 Quality European made Silenced Excavator Hydraulic Hammer Rock Breaker to suit: 7-17 ton machine. The Italians know their concrete (and how to break it up), this is a top quality Italian hammer at a very low price. No diaphragm. Pressurized series, suitable for all types of excavators, with silenced casing. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. 1 year manufacturer's Warranty. Manufact

Price includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.

The price includes GST. Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket. Condition is used and there is some light surface rust, but is otherwise a good solid bucket in great shape with little wear, and has plenty of life left. The cutting sides have extra reinforcing plates welded for durability. Current Headstock configuration: 28.5mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins. 203mm Pin Center to

The price includes GST. New Atlas Heavy Engineering (AHE) Excavator Ripper, suit 1.5-4 Ton machine. Designed for Bobcat 331/430, Komatsu PC 20-7/PC 25-1/PC 27R-8/PC 28UU-2/PC 30-7/PC 30R-8/PC 30MRX/PC 30MRX-1/PC 35R-8/PC 35R-8E/PC 38UU-2 etc. but will fit other machines (see below list of machines we have found so far). Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. This is a strong, well engineered & reinforced Ripper that has come fr

The price includes GST. New Jaws built Excavator Ripper, suit 5-10 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. This is a very solid, quality built Ripper Made in Australia by Jaws: https://www.jaws.com.au Originally designed for John Deere 315SG (55mm/50mm pin setup), but the Front Pin has been milled down to 50mm so both pins are now 50mm. You could easily reinsert another 55mm pin if you want to set it back to a John D

The price includes GST. Used 1250mm Excavator Dozer Grader Blade suit 4-10 Ton machine. Great for landscaping, scraping, leveling, clearing of vegetation, grading, batters, and shaping for drainage. Condition is used but this is a well built, solid grader blade with plenty of life left. Made in Australia by ECH: http://www.ech.com.au Current Headstock configuration: 50mm Pin Diameter, 290mm Center to Center, 184mm Between the inside Ear Bosses (which can be shaved back up to 210mm between th

The price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 9-18 Ton machines. Designed for Kobelco SK100 / SK115, Komatsu PC100 / PC120 / PC128 / PC138 / PC150 / PC158 / PW100, New Holland EC160 / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far). Condition is used but is in great shape with plenty of life left. 60mm Pin Diameter. 400mm Pin Center to Pin Center (CtoC). Between The Ears (BTE): 252mm width where

The price includes GST. 60mm pin Excavator / Backhoe Headstock to suit 9-20 ton machines. There is some light surface rust and a few small dings but is otherwise in great condition. Designed for Kobelco SK100 / SK100LC / SK115SR, Komatsu PC100-3 / PC100-5 / PC100-6 / PC120 / PC120 Mighty / PC120-3 / PC120-5 / PC120-6 / PC128UU-2 / PC150HD / PW100-1 / PW100-3, New Holland EC160LC / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far).

The price includes GST. Used 1200mm Excavator Mud Bucket suit 5-11 Ton machine. Condition is used. It has some light rust pitting inside the bucket, but is otherwise a great sturdy bucket with plenty of life left. It has a bolt-on front cutting edge and there are extra wear strips welded underneath for durability (see pic#10). One of the wear strips has a crack at each end that could use a weld or 2 if you plan to be doing heavy work with it. This is a quality bucket made in Australia by Oz

The price includes GST. Used 1500mm Atlas Heavy Engineering Excavator Hydraulic Tilting Mud Batter Bucket suit 9-20 Ton machines, with Topcon TS-1 Tilt Sensor. Designed for Hitachi EX110-5/EX135/EX120-2/EX120-3/EX120-4/EX120-5/EX135UR, Hitachi Zaxis 135US, John Deere 135C RTS, Kobelco K905/SK120/SK130/SK135/SK135SR, Sumitomo SH120-3/SH125-3/SH125X-3/SH130-5/SH135-3/SH135X-3, Takeuchi TB1140 etc. but will fit other machines (see below list of machines we have found so far). Twin Ram design, t

The price includes GST. New 65mm Pin Excavator 5 Finger Mechanical Grapple Grab suit 8-20 Ton machine. Full range of Motion and Opening Grapple Grab without needing any Hydraulic lines. The top bracket of the Grab mounts around your Excavator's Dipper Arm (see pic# 10) and you simply use your hand control that would normally Curl your bucket to open and close the Grab. Ideally designed for Rock, Log & Trash work, but can also be used for light-medium duty Demolition and general material hand