194 Results: New & Used in Other Parts & Accessories in Beverley 5009, SA

this is for a FALCON XK-XP 2 SPEED FORDOMATIC DIPSTICK TUBE. the tube needs a good clean up but has no damage. (i have no dipsticks to suit). for more details, phone the number supplied during business hours.

this is for a FALCON XP DRUM BRAKE MASTER CYLINDER. GIRLING. 1" bore. the plastic reservoir and cap are very brittle and have cracks etc. the cylinder will more than likely need to be reconditioned. hopefully someone will have a use for it. for more details, phone the number supplied during business hours.

this is for a pair of FALCON XR REAR DOOR TRIMS. MEDIUM BLUE colour. 1 RH and 1 LH. both have some level of colour fade from ageing of course and a couple of small nicks in the trim here and there. would suit an original unrestored car as they are not mint of course. (i do not have any front door trims). for more details, phone the number supplied during business hours.

Roof rack suit H series $200 negotiable

this is for a FAIRLANE ZA/ZB grille. it is quite a clean and tidy grille overall. no cracks or accident damage. a couple of the slats will need some straightening. it has some ageing of course. the alloy has lost some of its shine and would suit a daily driver or basic restoration. for more details, phone the number supplied during business hours.

this is for a FALCON XR/XT AUTOMATIC INDICATOR QUADRANT. suits 6 cylinder models (B/W 35). no cracks and the chrome is faded. no lens. for more details, phone the number supplied during business hours.

this is for the inner section of a door cut out from an XR Falcon. suits right hand (drivers side) front. it is the section behind the door trim which has the areas specific to an XR model. ideal if someone has an XT/XW/XY door which they would like to modify and turn into an XR door. for more details, phone the number supplied during business hours.

********* LOCAL PICK-UP ONLY ************** this is for 1 FALCON XW/XY FRONT SWAY (STABILISER) BAR. 18mm diameter. needs a good clean up. local pick-up only and i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

********* LOCAL PICK-UP ONLY ************** this is for 1 FALCON XR/XT FRONT SWAY (STABILISER) BAR. 18mm diameter. needs a good clean up. local pick-up only and i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XK/XL INTERIOR SUNVISOR. SUITS EITHER SIDE. REASONABLE CONDITION FOR A DAILY DRIVER QUALITY CAR. THE VISOR HAS NO RIPS. IT IS THE STAR PATTERN. IT HAS BEEN PAINTED AT SOME STAGE AND WILL NEED A GOOD CLEAN UP AND POSSIBLY BE PAINTED AGAIN TO LOOK BETTER. PLEASE NOTE THAT THERE IS NO BRACKET OR PLASTIC VISOR PIN. for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XK/XL INTERIOR SUNVISOR WITH BRACKET. THE ACTUAL VISOR SUITS EITHER SIDE BUT THE BRACKET FITTED IS TO SUIT THE LEFT HAND (PASSENGER) SIDE. THE VISOR HAS NO RIPS. IT IS THE STAR PATTERN. WILL NEED A GOOD CLEAN UP OR WOULD SUIT A DAILY DRIVER QUITE NICELY AS IS. THE BRACKET SEEMS TO PIVOT WELL BUT COULD DO WITH SOME LUBRICATION. THE BRACKET IS NOT LOOSE AND FLOPPY. PLEASE NOTE THAT THERE IS NO PLASTIC VISOR PIN. NOTE: WE DO NOT HAVE ANY VISORS COMPLETE WITH BRACKET TO SUIT TH

THIS IS FOR 1 FALCON XK-XP WAGON TAILGATE LOWER HINGE. SUITS LEFT HAND (PASSENGER) SIDE. AN AREA HAS BEEN WORN DOWN (MAYBE FROM RUST) IN THE CIRCLED AREA. IT DOES NOT AFFECT ITS FUNCTION BUT WILL NEED TO BE BUILT UP WITH SOME WELD TO LOOK NICER. VERY LITTLE PLAY IN THE PIVOT AREA. WILL NOT SUIT UTE OR VAN. (WE DO NOT HAVE ANY RIGHT HAND HINGES). for more details, phone the number supplied during business hours.

THIS IS FOR 2 FORD XP FAIRMONT REAR 1/4 PANEL SCRIPTS. BOTH SUIT EITHER SIDE. BOTH ARE IN VERY GOOD CONDITION WITH THE USUAL SLIGHT AGEING. ONLY A COUPLE OF VERY SMALL RANDOM PITTS AND WILL NEED THE PAINT DETAILED. INCLUDES THE MOUNTING CLIPS. WOULD SUIT A DAILY DRIVER/UNRESTORED CAR VERY NICELY. THE PART # IS A LITTLE DIFFICULT TO READ BUT IT LOOKS LIKE ARC5DB-54291A-36B. for more details, phone the number supplied during business hours.

************** LOCAL PICK-UP ONLY ****************** this is for a FALCON XM/XP SEDAN REAR 1/4 PANEL. (removed from an XP model). suits right hand (drivers) side. not accident damaged. a few minor dents here and there. some rust spots on the lower 1/4 outer and some rust on the lower 1/4 inner. the wheelhouse looks good except for where it meets the lower 1/4 outer area. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate an

************* LOCAL PICK-UP ONLY ******************** THIS IS FOR A TOYOTA 5 SPEED GEARBOX (CELICA???) THAT WAS MOUNTED BEHIND A FORD 250 NON-CROSSFLOW ENGINE IN A 1966/67 XR FALCON. THE GEARBOX SHIFTS INTO GEARS AND OTHER THAN THAT, WE DO NOT KNOW ANYTHING MORE ABOUT ITS CONDITION. INCLUDES THE FALCON BELLHOUSING, FLYWHEEL, CLUTCH PLATE, PRESSURE PLATE, SANDWICH PLATE AND INSPECTION PLATE. ALSO INCLUDES THE TAILSHAFT WHICH WAS BOLTED TO THE STANDARD BORG WARNER DIFF. ONLY WHAT IS SHOWN IN TH

this is for a FALCON XK-XP WAGON WINDLACE SIDE METAL STRIP SET. this is for the 4 metal strips that screw to the roof of a wagon. all will need some straightening. includes as many of the clips and screws as were there when removed. included is a pair of metal curved strips that screw onto the rear wheelarch area where the windlace fits. 1 of these has a few small rust holes as shown that will need repairing. for more details, phone the number supplied during business hours.

this is for a pair of FALCON XK-XP BOOTLID HINGE RODS. will just need a clean up. suits sedan and coupe. for more details, phone the number supplied during business hours.

Rear tail pipes to remove rear mufflers for an E53 BMW X5 3 litre petrol Bolt straight up to standard system, sound great looks great with 4 exhaust tips

THIS IS FOR 1 PAIR OF FALCON XT (1968/69) SEDAN BOOTLID MOULDING EXTENSIONS. 1 RH AND 1 LH. NO DENTS BUT BOTH HAVE A FEW SMALL SCRATCHES. INCLUDES THE MOUNTING CLIPS BUT NO NUTS. BOTH WILL NEED THE PAINT RE-DETAILED. ALSO FITS XT FAIRMONT SEDAN. for more details, phone the number supplied during business hours.

this is for a FALCON XL (1962/63) grille. average overall condition. it will need some straightening in a few spots. it has surface rust spots in a few areas on the outside of the grille and some surface rust spots on the top and underneath. includes the 3 grille brackets as shown. no broken slats. would suit a basic daily driver for "that aged look" or to suit rechrome. for more details, phone the number supplied during business hours.

this is for 2 FALCON XP 14" 4 stud wheel rims. 5" wide. suits models with original 4 stud disc brakes fitted. will also fit all XK-XP models with 13" 4 stud drum brakes. if someone requires only 1 rim, we are happy to sell them individually for $150ea.. regarding condition: both need a good clean up and recondition of course. the dark coloured rim will need a good sand blasting and clean up as shown in photos 3 and 4. the light coloured rim will need some re-rolling around the outer lip in on

this is for a FALCON XK DOOR FRAME CHROME MOULDING SET. suits sedan only. 8 pieces in total. 1 curved moulding and 1 vertical moulding for each door. most of the mouldings will have a few dings on them that will need repairing of course. also includes 2 B pillar exterior chrome trims. these 2 trims will require some dent repairs. NOTE: this set would suit a daily driver or patina car easily if you do not mind the imperfections. if you are requiring a set to go on a nicer restoration, some rep

this is for a FALCON XP STEERING WHEEL. it does of course have a few cracks here and there as usual and will require the usual recondition. (i have no horn rings to suit). *** PLEASE NOTE: THIS STEERING WHEEL IS MISSING ALL THE HARDWARE UNDERNEATH THE CENTRE AREA. IT DOES NOT INCLUDE THE HORN PLATE OR THE CANCEL EARS (AS CAN BE SEEN IN PHOTO 7). for more details, phone the number supplied during business hours.

holden hj kingswood wagon, needs some work, motor runs, colum auto, south australian plates, bucket seats with center console, tow bar, rust isnt too bad, good floors and needs new exhaust