7 Results: New & Used in Power Tools in Riverstone 2765, NSW

We have owned this unit for close to 15 years and it’s never let us down. Extremely well-made with a solid diecast body, and it has adjustable feed speed and a stay that holds the head fully up while positioning material. The vice is extremely strong and easy to operate. The only change made is we have put a larger clear sided tank on the side, which allows you to use more coolant and we’ve also put a tap on the coolant outlet to control the coolant flow. Hacksaw comes complete with 15 asso

Thicknesser working fine

We are selling a turret light which we have used to produce components for our business. With the increase in our sales, we are now able to move to injection moulded parts which had previously been produced on this lathe. The lathe was manufactured in Japan and is a lovely unit to operate and once set up can produce multiple components repeatedly. We have owned it for several years, and it has been a very reliable workhorse, but we have no further use for it. The lathe comes with a range of

This unit was used on the bottom of a silo system and would empty western red cedar shavings into a briquette machine. The unit has an input diameter of 300 mm and is manufactured from diecast material and is extremely heavy and robust. Either side of the impeller on the driveshaft are bearing housing with grease nipples for maintenance, and they are then driven through a series of pulleys and V belts which allow you to adjust the speed of the valve, and this is then driven by three-phase mot

This generator was purchased approximately 12 months ago because of flooding and loss of power in our factory at Riverstone. The unit ran the office, the lights and a compressor which allowed us to continue to function as we were without power for about three weeks. I purchased this unit second-hand and selected an LPG unit as it is both simpler to start, less temperamental and on a standard barbecue bottle it would run for over a full nine hours on a single bottle. The unit has an electric

This coolant pump was used on a robot machining centre, which we’ve sold. It’s three phase and has pumped coolant in high volumes without any issues. The motor is a quarter horsepower, so it has a very good pump rate. Happy to run them while doing a ‘FaceTime’ so you can see it running and pump in real time and have no problems in packing it up to ship.

We have owned this unit for close to 15 years and it’s never let us down. Extremely well-made with a solid diecast body, and it has adjustable feed speed and a stay that holds the head fully up while positioning material. The vice is extremely strong and easy to operate. The only change made is we have put a larger clear sided tank on the side, which allows you to use more coolant and we’ve also put a tap on the coolant outlet to control the coolant flow. Hacksaw comes complete with 15 asso