218 Results: excavator attachment in Queensland (Page 6 of 10)

Unearth Quality Attachments - Helping Your Civil Business Grow

Rake for 2-4t excavator , 1000 wide,500 mm high , hitch will be made to fit your machine. Other sizes and attachments available.

5.5 t excavator, akdi steer and truck for hire , all attachments 20t excavator also, all attachments. Housepads, shed pads, roads, drainage, clearing, ulk earth, civil works, rock walls , anything earth

The price includes GST. New JB Attachments Excavator Mechanical Quick Hitch Coupler to suit 3-5 Ton machines. Want a quick hitch but don't have any spare auxiliary hydraulic lines for a hydraulic hitch? This hitch is identical to a hydraulic hitch setup and there is no need to pull either of the 40mm pins out of your buckets like some manual hitches require. Instead you simply sit the lower front hooks of the hitch over your bucket's front pin and rock the hitch back so it seats fully into t

The price includes GST. New Jaws Excavator Auto-Locking Hydraulic Coupler Quick Hitch to suit 3-6 Ton machines. Designed for Airman AX30/AX32U/AX36U, Case CX 31/CX 35/CX 36, Hitachi EX 30/EX 30U/EX 33U/EX 35/EX 40UR/Zaxis 30U, IHI 35J/(Cheiftain) 35G/H/J/35NX, Kobelco SK 30SR-2/SK 32/SK 35/SK 35SR/SK 35SR-2, Kubota KX 91-3/KX101-3/U35/U35-3, Pel Job EB 36/EB 406, Sumitomo SH 35, Takeuchi TB 35/TB 36/TB 135, Wacker Neuson******3503/3703/28Z3/38z3, Yuchai YC 35SR etc. but will fit other machines

The price includes GST. New price from Doherty is $4500. New Excavator Hydraulic Snaplock Multi Hitch to suit 3-6 Ton machines. Snaplock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab attachments used on other machines with a 175mm-215mm Pin Center to Pin Center range. It has a very low profile, light weight. Lifting Eye rated: SWL 1,500kg. Condition is New & Unused

The price includes GST. New Excavator Hydraulic Quick Hitch Coupling to suit 3-7 Ton machines. Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). It has a low profile and light weight. Strong and well engineered. Made by Volvo in Ireland. It is brand New, never used. It was fitted to a new Volvo ECR58 and shipped to Australia then removed by Volvo when their customer wanted a tilting hitch fitted. It then sat in a Volvo warehouse for 5 year

The price includes GST. New High Capacity (250 Liters) 300mm Doherty / RF-System, Excavator / Backhoe Deep Trenching Banana Gummy Bucket suit 4-12 Ton machine. Strong and well engineered, made in Sweden by RF-System AB (RF): https://rf-system.se/en/ It was surplus stock from Doherty Couplers and Attachments (Australia & New Zealand), who add headstocks to these skins and rebrand as Doherty buckets. The side cutting edges are thicker than the rest of the bucket to help reduce wear, and it has

The price includes GST. New Jaws built Excavator Ripper, suit 5-10 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. This is a very solid, quality built Ripper Made in Australia by Jaws: https://www.jaws.com.au Originally designed for John Deere 315SG (55mm/50mm pin setup), but the Front Pin has been milled down to 50mm so both pins are now 50mm. You could easily reinsert another 55mm pin if you want to set it back to a John D

The price includes GST. 60mm pin Excavator / Backhoe Headstock to suit 9-20 ton machines. There is some light surface rust and a few small dings but is otherwise in great condition. Designed for Kobelco SK100 / SK100LC / SK115SR, Komatsu PC100-3 / PC100-5 / PC100-6 / PC120 / PC120 Mighty / PC120-3 / PC120-5 / PC120-6 / PC128UU-2 / PC150HD / PW100-1 / PW100-3, New Holland EC160LC / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far).

The price includes GST. New High Capacity 600mm Doherty / RF-System, Excavator / Backhoe Deep Trenching Banana GP Bucket suit 4-15 Ton machine. Strong and well engineered, made in Sweden by RF-System AB (RF): https://rf-system.se/en/ It was surplus stock from Doherty Couplers and Attachments (Australia & New Zealand), who add headstocks to these skins and rebrand as Doherty buckets. It has Tapered sides so mud slides out easily and there are extra Wear Strips welded underneath for durability

The price includes GST. Use common 80mm Pin buckets & attachments on a 70mm Pin Excavator with this Adaptor / Manual Hitch. Condition is New, but it was unused for a long time and had some light surface rust. We cleaned it up and gave it a fresh coat of paint. *** Pin Setup Dimensions (where your Dipper Arm goes in): * Pin Diameter: 70mm. * Pin Center to Pin Center (CtoC): 415mm. * Between The Ears (BTE): 278mm Between the inside Ear Bosses of the hitch (which can be shaved back up to 301mm

This 70mm Excavator Pin with Bosses has been cut out from a bucket's Headstock. The Pin is in great condition and can be removed from the Bosses if you just want to use the Pin. Or the Bosses could be Re-welded into another attachment. Pin Dimensions: 70mm Pin Diameter, 540mm Long. Smooth Collar Boss Diameter: 120mm (not including the extra metal of the area cutout). Width of Boss Collars with Locking Bolt: 118mm. Width of other Boss: 80mm. Overall Dimensions: 540mm Long, 160mm Wide (at the

The price includes GST. 70mm pin Excavator / Backhoe Headstock to suit 12-21 ton machines. There is some light surface rust and a few small dings but is otherwise in good condition, was cut off a bucket to fit a different sized headstock. Designed for Hyundai R160LC-3/R170W/R180LC-3, Kobelco ED180/SK160LC/SK170-6E, Komatsu PC150/PC150-5/PC150-6/PC160/PC160-6/PC160LC-7/PC180, New Holland EH160LC etc. but will fit other machines (see below list of machines we have found so far). Can be used fo

The price includes GST. 70mm pin Excavator / Backhoe Headstock to suit 12-23 ton machines. There is some light surface rust but is otherwise in good condition. Designed for Caterpillar 315 / 315B / 315B L / 315C L / 317 etc. but will fit other machines (see below list of machines we have found so far). The sturdy Box Frame below could be used for some specialist attachments or cut the headstock off to use it for a standard mounting headstock for a Rock Breaker Hammer or Auger, or mount as a

The price includes GST. 70mm pin (or bore out to 80mm pin) Turners Engineering Excavator / Backhoe Headstock to suit 12-23 ton machines. There is some light surface rust and a dings in the Ear Plates but is otherwise in good condition. Was cut off a bucket to fit a different sized headstock. Designed for Kato 700, Kato 800, Kato 900 etc. but will fit other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch). Can be used for a mounting headstock for a R

The price includes GST. Used Excavator Hydraulic Quick Hitch Coupling to suit 15-32 Ton machines. The front hooks that grab the bucket's front pin have been extended (see pics# 4, 6, 9) to pick up attachments with a longer Pin Center spacing (full details below). Condition is Used, but is otherwise in good working condition with plenty of life left. Has Rear Lifting Eye Hook. *** Pin Setup Dimensions (where your Dipper Arm/Stick goes in): * Pin Diameter: 80mm. * Pin Center to Pin Center (

The price includes GST. 80mm / 62.5mm pin Excavator / Backhoe Auger Headstock Hitch Mount to suit 14-32 ton machines. There is some light surface rust and a few small dings but is otherwise in good condition. Can be used for a mounting headstock for an Auger Motor Drive or similar attachment. Pin setup to Excavator Hitch: 80mm Pin Diameter, 332mm Between the inside Ear Bosses (which can be shaved back up to 370mm between the Ear Plates if you need more inside width for your hitch or dipper a

The price includes GST. 90mm/80mm pin Excavator Headstock to suit 17-36 ton machines. There is some surface rust and light pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. The 2 fins could be cut off to make a standard flat plate headstock. The 90mm Pin could be milled down in the middle to make an all-80mm pin headstock. Or the 80mm pin could be sleave

The price includes GST. 90mm pin Excavator / Backhoe Headstock to suit 20-36 ton machines. There is some light surface rust and pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Headstock setup: 90mm Pin Diameter, 500mm Pin Center to Pin Center (CtoC), 340mm Between the inside Ear Bosses (which can be shaved back up to 364mm between the Ear Plates if you

The price includes GST. As New Excavator Hydraulic Coupler Quick Hitch to suit 22-40 Ton machines. Designed for: Case CX240 / CX290 etc. but will fit other machines (see below list of machines we have found so far). Condition is Used, but has almost no use and there is no wear on either the pins or the hooks, just has some chips on the paint. Has Lifting Eye Hook (see pics# 1-4). Pin Setup Dimensions (where your Dipper Arm goes in): * Pin Diameter: 90mm. * Pin Center to Pin Center (CtoC): 4

The price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,

The price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 21-48 Ton machines, but is designed to allow a 90mm Pin machine to pickup attachments with 90-100mm Pins and a wider Pin Center distance. Made for Machines: Daewoo DX300 LC / Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK250LC / SK290LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC30

The price includes GST. Used JK Excavator Hydraulic Quick Hitch Coupler to suit 22-50 Ton machines. Condition is used with a few scrapes & dings, but otherwise is a solid, well built Hitch and has plenty of life left. Pin Setup (where your machine's Dipper Arm goes in): * Front Pin Diameter: 100mm. * Rear Pin Diameter: 90mm (this could be bored out to 100mm as there is plenty of meat on the bosses). * Pin Center to Pin Center: 509mm. * Between The Ears (BTE): 386mm Between the inside Ear Bos