315 Results: bike in Toowoomba Region, QLD (Page 13 of 14)

Small 12 inch bike trainer wheels and carrier

Other than being painted black the rim is in very good condition with a few nics here and there. Very nice for a 40 year old dirt bike wheel. It should also fit cr125, 250, 480 as well as other xls and xrs if you’re doing a period resto and are chasing a good rim. No cracks.

Not too bad for a 40 year old farm bike exhaust. A few dents and a dodgy birdshit weld on the tail piece that needs repairing but it will get you out of trouble cheaply. $50

Picture for illustration only. Not the bike being parted. Lots of parts after doing a bike up. Message me with what you are chasing and I’ll see if I have it. Cheers

I used this lift on my Sportster but do not own it anymore. This 2 piece bike lift sits under the full frame and will raise it by 30cm so might be suitable for other models as well. It has surface rust but does not affect its operation. Please contact via Gumtree. This is pickup from Toowoomba 4350 QLD.

Yes its Available Rod & Kulture Hot rod Magazine , Hotrods Kustoms Pin ups, Bike , Art , Music . Photos form part of the description , $35 posted in Australia All Contact thru Gumtree

Bits and pieces left over from a bike build. Message me what you’re chasing an I’ll see if I have it and give you a price. Cheers

!!!!!!RING ONLY!!!!!!!! DURAQUAL EX-MINES WATER BLASTER 8000PSI COMPLETE Less motor and trailer. Comes with verious psi hoses the largest of wich is 20 000psi. Also Two full Stanless Steel Blasting Wands, they are aprox. 4foot long. I have the Drive Pulley which has the BellHousing attached, its been fitted with a Red Motor Holden BellHousiing. See photos. When the guy bought the unit from the mines, it had a dead diesel motor on it. You can us

Fits from 05-08 i believe. Came from a bike that had done very low kays. No leaks but I would recommend a kit before fitting. Includes hose and holding lugs. $250

Building one out of two. Both bikes run well. The engine on the one im wrecking has 42000ks. Front brake master cylinder has been sold. Cheers

16 in small bike trainer wheels to go with tidy condition

Great condition. Came from a running bike. All of the connections are intact. $125. Cheers

Great condition. Not cut or butchered. No damage to wiring anywhere. Includes flasher unit. Came from a very tidy bike. $75

Never been fitted. Bought the bike. Left the cowl on and kept the seat when I traded the bike in. Has some dust on it and a small tear has occured since I posted this ad 4 years ago. It has still never had an arse sit on it $100. They retail for $280 new and fit from 09-11. Cheers

Aftermarket never used. A new seat/ seat cover helps get your bike looking good again. $50. Cheers

Great condition. Came off running bikes. $45 ea. Cheers

Good condition. Will work on other bikes as well. $50

Good condition. Will work on other older bikes as well as long as they run a 12v system. $25 each

Good condition. Worked fine on the bike but I have sold the master cylinder. $150

12 volt coil for yamahas. Will work on other bikes as well. $50 ea

Good condition. Turned the bike over nicely. Good spline. May fit other models. Part number 21163-1193, 128000-9640. $75. Cheers

Spat a rod out of the cases. Was going to get a new engine but it never happened. All parts available. 66 ks on bike. Selling parts only. Cheers

Good condition. Holds your bike up. $50

Great bike. Engine has been sold. Only parting out because of the split tank. See last pic. Bike is in great condition for its age.