226 Results: New & Used in Trucks in St Albans 2775, NSW

Hydraulic oil Tank Has 1 1/4" sockets in the floor and breather at the top. 510mm H x 910mm W x 310mm D

Ring Feeder (Feder) truck dog trailer tow hitch/tow bar American chassis mounts inside rails approx 850mm Came off Freightliner Text only please no emails If the ad is up then yes it's available Kenworth, Mack, International, Isuzu, Hino, Dog trailer, Ring feeder, tag trailer, Tow bar

• 535000 km
• 4x2
• 16000 kg(GVM)

Price includes GST Isuzu FVR 950 2002 model 16T GVM Reconditioned engine and gear box 10 pallet Freezer body with 2T tail lift Freezer motor has 2/3 life still in hours Near new tyres all round 2 fuel tanks Comes with 6 months rego Can driver with MR license

• 49700 km
• 8x4
• 32000 kg(GVM)

1991 Ex German Military Man Truck VIN - WMAX110346W016853 Gross Vehicle Weight - 32000 KG Gross Combination Weight - 40000 KG Unfinished Mobile Crane Project Was planned to have a steel flat bed across the steel columns with a generator against the back of the cab. Included is a second complete identical truck. Only issue with second truck is the tank has become contaminated with water & needs 4 new 12v batteries / it has not been run since the tank was contaminated The first truck

Tipper Truck Door Seal Slides into existing aluminium or alloy extruded channel. Tough and durable, and specially designed for outdoor use. Seals are made of EPDM rubber, and are highly resistantant oxidation and UV exposure. Suits Borcat tipper trucks Minimum order quantity: 15 metres. Colour: Black. $5.80/metre 40% off www.cdjrubber.com.au

THE BACK OF THE MAT IS REINFORCED WITH NYLON FABRIC FOR ADDITIONAL STRENGTH & ALSO TO PREVENT TEARING & CRACKING. DIMENSIONS AND PRICING 1] 2400 mm X 2400 mm with moulded rubber slats - Price $430.25/mat 2] 1750 mm wide X 1500 mm long with moulded rubber slats- Price $240.50/mat 3] 1200 mm wide x 2400 mm long with moulded rubber slats-price $229.80/mat These mats have high traction, and the moulded slats with the grooved design in between the slats provides maximum anti-slip proper

Hino Pro FD 2004 Genuine Radiator New

I'm looking for a cabin for my 1981 to 1986 F100 or Bronco or complete wrecker body. Complete truck would be prefered.

• 265 hp
• 180000 km
• 4x2

Nissan UD MK265 265hp 6 speed box 180k 6 tonne carrying capacity 5 inch exhaust with muffler 5 inch intake New with receipts to prove 6 speed box Clutch Front shocks Brakes all round including bearings, hub seals etc UHF with aerial Headunit Speakers 24v to 12v reducer to run accessories in the cab Constant power in the cab for a fridge Have original gates and tarps to go with it Yes she is a fast and capable truck

Gates 38502 belt tensioner for Detroit 60 14l engine. Brand new and no longer needed. I paid about $350. Hawkesbury nsw, can post.

Turbo off a 475hp 6nz c15. Removed to upgrade. No issues, no shaft play, works perfect, just a couple small nicks in the impeller as seen in the photo. Located Hawkesbury nsw, can post.

CAV Inline 6 cylinder Diesel Injector Pump. Fits many makes of trucks and tractors. Removed from Perkins P6 as a spare for a voyaging boat. Also includes a seperate stripped down pump, chemically cleaned, for further spares or a rebuild.

Parting out International Acco dual cab 1984 Lights and siren’s have been sold Cab is very rusty 6V53T 2 stroke Detroit, very healthy engine runs well Allison auto Rear diff has retarder Has main pump and auxiliary diesel pump (needs work) Parts FROM $500

1983 Isuzu SBR 422 Forward- Diesel Moto The engine is extremely healthy .(can show a video of the engine running). Original truck it was installed within is :VIN SBR4223445436 which was a dual cab truck with a large camper unit attached that has been scrapped. Camper has been transplanted to a newer 4x4 Isuzu dual cab/chassis truck. Some other SBR 422 parts will be listed soon also. Engine number : 6BB1227879 • 6 cylinder diesel engine. ( ENGINE ONLY ) • Naturally aspirated. • Six speed gea

Brand new had made for tow truck strap boxes but never installed or removed all the plastic 610mm wide 290mm deep 400mm high price ono

Lusty Steel Truck Tipper Body with grain extensions, grain shute & roll over tarp on grain extensions and wind up mesh tarp on tipper bin, all in good condition. Steel truck tipper body is in straight condition with 2- way tail gate. Measurements in photos 4.4m length x 1.5m

• 865755 km
• 6x4
• 23200 kg(GVM)

1994 International S3600 with 865755klm. In good condition for age. Cummins M11 370HP. Rebuilt approximately 400000Klm ago. Has 18 speed Roadranger, Turbo Timer, Speed Limited, Reverse Beeper, 8.1mt Tray including 1.2mt Beavertail and Hydraulic Ramps. It also has a fuel pump off the main fuel tank . The Rear tyres are 85% and Front tyres are 50%. NOTE: Number plates DO NOT come with the truck.

I have for sale rebuilt Mack Truck Heads $4800 Also a used Turbo in good condition $550 Selling separately. Ring for details.

35 ton air/ hydraulic floor jack. Bought new, never used

Eaton front diff centre, has done three months work since rebuilt, Model no. DS 451 Ratio 4.33. Ring for information.

Air Suspension Seats - New Stock Available Now ADR compliant air suspension seats to suit various truck models including: Hino Ranger, Pro 500 & 700 Series models 1996 to 2011, Mitsubishi Fuso Fighter FK, FM and FN models 1996 on, Nissan UD MK and PK models 1997 to 2010. Also available is Passenger / LHD Driver seat to suit Hino 500 Series FC, FD, FE, FG, FL, FM, FT, GH and GT models 2011 on. See below for our range of air seats. Express shipping Australia wide. Global Truck Imports - The

Get new Door Shells to suit Isuzu FRD, FRR, FSD, FSR, FSS, FTR, FTS, FVD, FVL, FVM, FVR, FVY, FVZ, FXD, FXL, FXR, FXY, FXZ, FYH, FYJ and FYX models 2008 on. Made in Taiwan our Door Shell are high quality OEM replacements and include reinforced mirror mounts, correct hole patterns, sizes and threads and are available either EDP primed or painted. Painted Door Shells Save time and money and get your truck back on the road faster with our painted Door Shells. Professionally painted at our facto

Get new Door Shells to suit Isuzu NLR, NLS, NNR, NPR, NPS and NQR models 2008 on Made in Taiwan our Door Shell are high quality OEM replacements and include reinforced mirror mounts, correct hole patterns, sizes and threads and are available either EDP primed or painted. Painted Door Shells Save time and money and get your truck back on the road faster with our painted Door Shells. Professionally painted at our factory in Australia, our painted Door Shells are shipped ready to fit. Sold ind

Get new Door Shells to suit Mitsubishi Fuse Fighter FK, FM and FN models 1996 on. Made in Taiwan our Door Shell are high quality OEM replacements and include reinforced mirror mounts, correct hole patterns, sizes and threads and are available either EDP primed or painted. Painted Door Shells Save time and money and get your truck back on the road faster with our painted Door Shells. Professionally painted at our factory in Australia, our painted Door Shells are shipped ready to fit. Sold in