11 Results: hayman reece weight distribution in Western Australia

Hayman Reece hitch, no longer required due to vehicle upgrade

Hayman Reece. Very good condition. Not required with new car.

• 21 ft
• Sleeps 2

2010 (unused last 3 yrs) Always garaged & on blocks when not used. 20ft 10inches, licensed (personal reg. plate not included), aluminium frame construction, insulated, independent suspension, 2 x 80ltr tanks, XC pack, Hayman Reece weight distribution kit, electric brakes, 150ltr 3-way frig, queen bed, en suite, washing machine, microwave, range hood, radio/cd, tv antenna, air conditioner, external tv and power points, picnic table, roll out awning, solar pre wire provision, H.W.S. gas/electric,

PART NO 66059 HT 600LB / 275 KG BALL LOAD PLUS 50MM HITCH WITH HANDBRAKE AND LOCK

• 17 ft
• Sleeps 2

17 Feet, Sleeps 2 Duel Axel Excellent condition, always sorted undercover when not in use Roll out Awning Fold down outdoor table, attached to side of caravan 1 x gas bottle, with room for a spare gas bottle Electric brakes Duel com sway control (Hayman & Reece) Weight distribution kit To view phone Jo -

All in good condition. Includes D035 hitch, hitch cover & C scanner. Includes hitch, bars, clamps, A frame brackets, pins . New - around $1,000 plus D035 $80/$90. Will seperate.

Hayman Reece weight distribution hitch 800 lb part number 66060HT no hitch only parts I have is in the photo

Hayman Reese 10 mm drop shank, part number 50020 in used condition. This drop shank is (usually) for the weight distribution hitch - part number 70013 or similar although this one has a short horizontal part and the edges have been ground down (I suspect to fit into some non-Reese - propriety tow bar receiver. . The distance between the outside edges of the dropper plates is 70 mm. This unit is unsuitable for the newer Hayman Reese hitches which are 50 mm systems and have differently sized/dis

Hayman Reese Dual Cam Sway Controllers - old style, in used condition. Includes the two cam brackets. DOESN'T include the chains which need to be removed from the trunnion bars on your weight distribution system and attached to the sway controllers. Includes 4 - 150 mm U-Bolts enableing it to be fitted to the 100 mm high draw bars. Longer - 175 mm U-Bolts would be required for the 150 mm high draw bars (these are not included). The modern dual cam systems use the same principal except the trunn

Hayman Reese weight distribution hitch in used condition with slight wear in the trunnion surfaces however it is slightly bent together with the long bolt (see photo of the front). Still functional though, also - it can be used just as a hitch anyway. Old type - for the Hayman Reese 500(20, 21, 24, 25, 28 & 32) drop shanks (NOT INCLUDED) - these all have dropper plates at a width of 70 mm - see diagram (NOT the 50 mm wide forged ones). Cheap considering the replacement cost of the bolts and he

Hayman Reese 250 Kilo Weight Distribution System brand new in box - well actually B.N.I.O.B.C. - brand new in old battered carton. The old type with the outside edges of the dropper plates (On the shank) being 70 mm however it will suit someone shopping for a NEW 250 Kg system. Number 74504 in the carton, includes; The standard short 50020 Shank The 70013 hitch and 22210E Trunnions with the LARGE pins 1 inch spring bars Maximum hitch weight (2 bars) 250 Kg (550 LB) Maximum gross trailer weight