6359 Results: New & Used in Wheels, Tyres & Rims in Mount Dandenong 3767, VIC

A Volk Racing 'Touring Evolution' centrelock race wheel (or JTCC RACING WHEEL' according to them), from the peak of the Japanese Touring Car Championship in the '90s. Used by a few different cars in the JTCC - Mazda Familia, Mazda Lantis, BMW 318is (and it's likely off this because of the Endless decal), and Nissan Primera. A forged magnesium wheel, made by Rays Engineering - super light, super strong - in sizing of 18x7.5. Shows the scars of mid-field battle in the mid-late '90s Japan

A set of Mazdaspeed MS-01R wheels from the early '90s, in the only spec they came in - 15x7 plus 35 4x100. These are a mix of just some of the different 7 original colours they were made in. Made by Rays Engineering's cast wheel division Vesta for Mazdaspeed, and these are a pair each of the zenki and chuki production versions. Just under 7kg ea, which is decent for a cast wheel - but these are also super strong. Decent shape overall for a set of these. The clearcoat on lips is startin

A pair of unobtanium Work STRAC5 'Special Five Spokes' wheels, made back in the '80s. They're a sandwich-face 3-piece wheel in the style of the AMG Penta, in sizing of 15x6.5 plus 15 and 4x114.3 PCD. In excellent condition overall with a few small marks here and there, and they've also got a pair of the original centre caps with some good Engrish to them - NEW FIVE SPOKES WHEEL SUPER CRIATION BY WORK CO. Would be good paired with some aeros on the front and these on the back. Wi

Have a set of Heroes Racing CX-2 wheels in 15 inch - either the Mesh-Type or the Fin-Type? Here's a set of the aero disc covers in silver. The CX-2 are one of the rarer aero wheels made back in the '80s, so seeing a set of these is rare. Realistically though, these covers could be adapted to fit a range of wheels with a threaded centre cap spindle. Good overall condition, a few small scratches here and there, and a few fin ends missing - but they're easy to replicate and restore. the cove

A set of the amazing AC Courréges ACB wheels. Made by Yamaco Industries of Japan, from a design by French fashion designer André Courréges back in 1984. Probably the most well-known of the striking AC wheels. This set's in double stagger of 12x5 plus 35 and 13x5.5 plus 38, in 4x100 PCD. Structurally in good shape, but obviously need a repaint. That's easy though, as the separate areas are cast into the face, and even the coloured stripes on the lips are in a grooved recess. Fun fact:

A set of Citta '3D' aero wheels, made by Bridgestone Corporation (yes, BS made/make wheels too). They're a one-piece cast wheel, in sizing of 13x4.5 plus 45, and in multi-PCD of 4x100, 4x110 and 4x114.3. Good overall condition, a few marks here and here in the silver finish and some light scrapes on the lip of one, but quite presentable overall. Plus they've got the usually-missing peaked centre caps. Easy fitment for keis and small cars. The future is now, old man. Willing

A set of gorgeous Hasemi Sport S'5 wheels, released in the late '80s - and this particular set was made in 1992 by Speed Star Racing. They're in specs of 15x6.5 plus 34 in 4x114.3, and are a three-piece wheel - so ripe for a rebarrelling. Excellent original condition, with dark silver faces and gold hardware, and some light patina here and there. These also have the magnetic SSR Electron locking centre caps, but it's been disabled on this particular set. Very rare to find a complete se

A pair of Create wheels, made in Japan by Hakodate Twin Co. in the early '80s, and they're an amazing take on a mesh design with some nice subtle dish. They're in sizing of 14x6.5 plus 9 in 4x114.3, and in excellent structural condition but someone decided the painting them blue would be a better idea. I've chipped the blue off to show the great design they have. These are unobtanium, these are the only ones I've ever seen in 5 years - so you're not going to see another set on your local

One of the most unobtanium centre caps ever - the coloured anodised caps for the Tanabe CST Precedeo and Demon Camber wheels. I reckon it's lucky if 5% of the wheels left in the world have these attached 😂 So anyway this lot is as follows, left to right: - blue, new-old-stock x 3 - blue, used, x 3 - red, new-old-stock x 2 - red, used x 3 No broken tabs, and suit 15" and 16" Demon Camber/Precedo wheels. Set of 4 blue caps - 3x new old-stock, 1x used (best) - AUD $605 Single blu

A set of peak tuner era R.S. Bros. '24C' wheels, made by Rays Engineering for RSB back in 1994. These are a 2-piece forged wheel, weighing just on 6kg each, and are in the original black and anodised yellow (BB-YL) colourway, but the black is actually a very dark gunmetal finish. This set's in sizing of 15x6.5 with staggered plus 39/plus 43 offsets, in PCD 4x100. Good big brake clearance, too. Overall they're in good shape, one wheel has a bit of rash, and a few marks and chips here and

A pair of August Japan 'Braddy' wheels. August are famous for their 'Feroce' range, but this is one of their lesser-known wheels - and quite rare because of it. They're in sizing of 14x6.5 plus 5, in 4x114.3. They've had the lips and face details polished, and faces painted in gold and black. Excellent condition overall compared to when I first imported these unrestored a couple of years ago. A cool double-six spoke design, with some nice detailing in the centre. Tyres not included.

A set of Mazdaspeed MS-01LM wheels in rare square sizing of 17x9 plus 34, in 5x114.3. Made by Rays Engineering in the mid '90s exclusively for Mazdaspeed, and this set is from 1992. These are a 2-piece wheel, with one-piece barrel and bolted forged face. Overall they're in good condition, but some marks and chips here and there, and some rash on one lip - see photos for details. **** CENTRE CAP SET IS NOT INCLUDED - HAS BEEN SOLD! ***** Plus some prototype 3D printed black centres.

A set of ultra rare JMW 'Cross-5' wheels, made in Japan by Topy Industries for their 'Japan Motor Wheel Project', back in 1981. They're a welded three-piece wheel with front-mount face and a bolted centre plate (with integral JMW centre cap) covering the lug holes. Sizing of 14x6.5 plus 4, in 4x114.3, and with the original barrel stickers. Good overall condition, you could easily run them as is, or restore them - or even rebarrel. Personally I think they look better without the centre

A set of rare Gallop Racing 'Mesh-7' wheels, made by Ogawa Corporation Ltd back in 1982. Good FWD sizing of 14x6 plus 33 in 4x114.3 PCD for your oldschool vehicle - or decent specs for a kei. They've been sandblasted in Japan, so are ready for a paint and polish, and you could paint them in either the gold, silver or polished/gold original finishes - or something wilder. Comes with a set of mismateched-logo Enkei and Heroes Racing centre caps, but easy to change that to whatever you want

A set of FET Sports 'Aero Disc' wheels, from 1983. Staggered sizing of 15x6 plus 25 and 15x6.5 plus 15, in 4x114.3. A super rare wheel and one of only a couple of designs from the Far East Trading Co., I've only seen two other sets and that was a few years ago now. Gunmetal faces, machined highlights, and novel adjustable-height FET centre caps (but only two of). Overall in good shape, with a little light rash on a couple, and the faces are showing their age a little. Heaps of big c

Want an itty bitty centrelock wheel for display? A single very rare SSR Type-C centrelock wheel, in 13x9 (as the 13x11 is SOLD). Made by Speed Star Racing back in the late '90s, and shod with Bridgestone RF02 slicks in 190/550R13 and 250/570R13 respectively. The paint is average and there's a little rash, but as they're for display only it's a moot point. Easy to turn into a table with the tyre already mounted and some glass on top, or mount on the garage wall. Rare to find centrelo

Premium D.O.T. radial racing tyres are ideally suited for Pro Dragsters, Hot Rods, Muscle Cars & Street Machines. What's being offered: - 2x Hoosier Pro Street D.O.T. Radial 24 X 7.50R-15 LT - 19030 (RRP: $US297.47 each) From manufacturer's website: Hoosier Racing Tire is the Industry leader in manufacturing the highest quality D.O.T Drag Radials, QT and Quick Time Pro Tires in the market. Tires are marked with a D.O.T stamp and manufacturing date legal to run in D.O.T tire racing classes.

1966 chevrolet impala ss hubcaps Good condition

Fitted and balanced at Chirnside park post code3116 .These two tyres are in excellent condition. Cost $550 each retail. Currently on 4 for the price of 3 still over $400 each. Fitting can be arranged. No repairs or damage. Slight wear on one shoulder . Other wise 85 to 90% tread. manufactured Week31 2020

This GQ rim and tyre in great condition 31 x 10.5 x15" tyre also very good

Toyota Land Cruiser Prado 2021, spare wheel hard cover in graphite. Removed in dealership as we had larger tires fitted. One scratch as shown in photo prob sustained in removal or storage.

A set of unique Bridgestone Potenza Preo wheels, freshly restored.. They're in sizing of 15x6.5 plus 23 and 4x114.3 PCD - the largest size they came in. The faces and barrels have been ceramic polished, and the details have been repainted into a contrasting gunmetal. Excellent condition overall, a few small marks there though. Rare to find these in 15" - or at all, really. Welded barrels but removable bolt-in face. A set of the original Preo centre caps is included, but I think they look bet

A set of the original Weds Sport 'Racing' wheels, better known as the Kurage or Jellyfish wheels. They're in sizing of 14x6 with staggered offsets of plus 10 and plus 20, in 4x114.3. This set was made in 1989 and they're a very cool design, with plenty of dish and a raised face which is rimmed with 'cooling' portholes around the perimeter. These have had the lips cleaned up and given a polish, and the faces have been repainted to the original gunmetal colourway. Still a little patina here a

A set of Renoma Paris Type '1 Piece' Turbo wheels. Renoma? They're a French fashion house, who partnered with Easy Riders of Japan to produce a handful of wheels in the mid '80s. This set's in sizing of 14x6 plus 35 in 4x114.3 PCD. These are in good structural condition with basically no rash etc, but obviously they need a repaint - or even a polish. Strip back the faces, leave the pockets and detailing painted, and these will look amazing. Willing to ship/post Australia-wide! Email me for