227 Results: New & Used in v.. in Brisbane South East, QLD

2x Yamaha model RX-V757 7.1ch amplifiers both presenting with the same fault: they will power on for 2 seconds before seitching thenselves back off (going into protection mode) Potentially a relay issue or dead ICs. Hefty 12.5KGs rated at 100W per channel, suit a tech for repair or to be used for parts... selling both as-is for 40 each or take both for 70. Pick up Carina.

This model does not have a phono input, so you'll need to use an outboard preamplifier if you want to add a traditional turntable. Whether your use is as a 2 x 100W AM FM Stereo Receiver (with subwoofer output) or a 5.1 x 100W Home Theatre / Surround amplifier the KRF-V5200D will perform the job beautifully. All channels can drive down to a 6ohm load. The unit has two optical digital inputs, one coaxial digital input, and six line level (aux) analogue inputs including one accessible from the

HERE FOR SALE IS A VERY GOOD HMC LITTLE NIPPER MANTEL RADIO FROM THE 1950s Its crafted with nostalgic flair of this period , its a true classic 240V. mantel radio This works perfectly made of quality bakelite finish in maroon color and has a full lighted dial when switch on. I have owned this quality radio from the 1950s, Model Number 64-52 plus has each States Radio stations dial selection, there is a small silver front grill missing. THIS Little Nipper HMV MANTEL RADIO CAN BE MAILED OUT BY

This model does not have a phono input, so you’ll need to use an outboard preamplifier if you want to add a traditional turntable. Whether your use is as a 2 x 100W AM FM Stereo Receiver (with subwoofer output) or a 5.1 x 100W Home Theatre / Surround amplifier the KRF-V5200D will perform the job beautifully. All channels can drive down to a 6Ω load. The unit has two optical digital inputs, one coaxial digital input, and six line level (aux) analogue inputs including one accessible from the fr

This model does not have a phono input, so you’ll need to use an outboard preamplifier if you want to add a traditional turntable. Whether your use is as a 2 x 100W AM FM Stereo Receiver (with subwoofer output) or a 5.1 x 100W Home Theatre / Surround amplifier the KRF-V5200D will perform the job beautifully. All channels can drive down to a 6Ω load. The unit has two optical digital inputs, one coaxial digital input, and six line level (aux) analogue inputs including one accessible from the fr

This model does not have a phono input, so you’ll need to use an outboard preamplifier if you want to add a traditional turntable. Whether your use is as a 2 x 100W AM FM Stereo Receiver (with subwoofer output) or a 5.1 x 100W Home Theatre / Surround amplifier the KRF-V5200D will perform the job beautifully. All channels can drive down to a 6Ω load. The unit has two optical digital inputs, one coaxial digital input, and six line level (aux) analogue inputs including one accessible from the fr

This is a good condition genuine Yamaha RAV461 / ZA11330 remote control that was originally supplied with RX-V373 and HTR-3065 Receivers from 2012. It’s almost identical to a RAV491 / ZF30320 remote control, so would also be suitable for receivers RX-V473, HTR-4065, RX-V573, HTR-5065, RX-V673, HTR-6065, RX-V773, HTR-7065 etc. Some functions (volume etc.) would no doubt also be suitable for other Yamaha series. Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics spec

Note that this product requires soldering. There’s nothing quite like the look of an old school receiver / amplifier / tuner / cassette deck with a lighted up dial or illuminated meters. To achieve the result many manufacturers used axial incandescent lamps that were about 19mm length by 4mm or so diameter. Unfortunately, all of these decades later many of those lamps have blown, marring the operational look of your vintage device. These long-life LED replacements will replace the old lamps,

Shipping on this product $7.95 Australia wide regardless of quantity. There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse. Unfortunately, all of

Aus wide shipping $8. Pioneer (and indeed some other brands) supplied many turntables as part of package systems that were designed to run from 12Vdc supplied from an output socket on the amplifier. A cost-saving measure that worked OK when the initial system was together, but a pain in the you-know-what if you want to re-use the turntable with another system. These little plugpack power supplies will provide a clean 12V to run the turntable allowing you to connect it to any system. We’ve pro

Shipping on this product $7.95 Australia wide regardless of quantity. There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse. Unfortunately, all of

(May have more than one available) Removed from a working installation in clean environment, fully bench serviced, resold with warranty. This is still a current model with a RRP of $1089. From the Japanese company that’s been building bulletproof professional grade audio equipment seemingly forever this P2240 single channel (so two needed for stereo) booster amplifier / power amplifier can drive a genuine 240 watts into either standard low impedance (4Ω minimum load) speakers, or multiple spe

(May have more than one available) Removed from a working installation in clean environment, fully bench serviced, resold with warranty. This is still a current model with a RRP of $1089. From the Japanese company that’s been building bulletproof professional grade audio equipment seemingly forever this P2240 single channel (so two needed for stereo) booster amplifier / power amplifier can drive a genuine 240 watts into either standard low impedance (4Ω minimum load) speakers, or multiple spe

(May have more than one available) Removed from a working installation in clean environment, fully bench serviced, resold with warranty. This is still a current model with a RRP of $1089. From the Japanese company that’s been building bulletproof professional grade audio equipment seemingly forever this P2240 single channel (so two needed for stereo) booster amplifier / power amplifier can drive a genuine 240 watts into either standard low impedance (4Ω minimum load) speakers, or multiple spe

Removed from a working installation in a clean environment, fully bench serviced and offered for sale with warranty this Australian made Audio Telex (now Australian Monitor) SA120 Mixer amplifier delivers 120 watts into either a normal low impedance load (4Ω or 8Ω) or will drive a distributed 70V / 100V line multi-speaker installation. The amplifier will run from either 230Vac, or 24Vdc. It has six inputs, each of which is capable of accepting a microphone (via 3 pin xlr socket) or a line lev

Use as standalone audio test / setup disc, or also with OmniMic precision audio measurement system. This is version 4 of the OMCD test disc produced by the USA’s Dayton Audio for use with their OmniMic precision audio measurement system (comprised of a calibrated microphone, software etc.). It is also of course a handy resource to have in your kit all on it’s own, suitable for use as a standalone system / component test CD. Particularly useful for setting gain levels etc. Dayton Audio's OMCD

(May have more than one available) Removed from a working installation in clean environment, fully bench serviced, resold with warranty. This is still a current model with a RRP of $1089. From the Japanese company that’s been building bulletproof professional grade audio equipment seemingly forever this P2240 single channel (so two needed for stereo) booster amplifier / power amplifier can drive a genuine 240 watts into either standard low impedance (4Ω minimum load) speakers, or multiple spe

Removed from a fully functional working installation in a clean environment this is an Inter-M (Korea) Weekly timer, a unit designed for large PA installations that can trigger chimes / inbuilt digital melodies to play at programmed times across up to four audio zones (separately programmable). Each zone can accept an existing signal source which will be overridden for the period that a programmed tone is playing. The unit can also can also switch the Euro style power outlets at the back. There

Shipping on this product $7.95 Australia wide regardless of quantity. There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse. Unfortunately, all of

Removed from a working installation in a clean environment, fully bench serviced and offered for sale with warranty this Australian made Audio Telex (now Australian Monitor) SA120 Mixer amplifier delivers 120 watts into either a normal low impedance load (4Ω or 8Ω) or will drive a distributed 70V / 100V line multi-speaker installation. This particular example is also fitted with an ATC5488 tone generator module, which can generate 4 tones (actuated via dry contact closure to rear terminal stri

Note. 230Vac model designed to fit Australian / NZ power outlets. Brand new, 12 months guarantee. Suitable for Thorens models and Pro-Ject models that were originally supplied with a 16V AC power supply. (Note, some Pro-Ject models need a 15Vdc supply, some need a 16Vac supply, and the Juke Box model with inbuilt amplifier needs a 24Vdc supply – all of which we can ALSO help with. Please check the back of your turntable to ensure you are purchasing the correct one.) Based in Brisbane and shi

Note: No remote control included with this unit, but all functions readily accessible from the front panel. We can optionally supply an aftermarket remote control programmed to Sony specs for an additional $29. Sony held the lion’s share of the market when it came to carousel style 5 disc players, making reliable well featured machines. This 1997 example has analogue output, and has “hot change” capability allowing you to change discs whilst one is still playing. The jog shuttle knob with AMS

Condition good come with remote, all information on pictures Price Firm. Item will setup so you can test listen everything working perfectly Location: Wishart 4122

A beautiful Mcintosh C32 Preamplifier from the late 70s era in great condition, I've had it for about 3 years now. In that time I've had it serviced by Nigel at speaker bug, including a whole new recap, new ribbon cables & converted to 230v, so it can last another 50 years! No bubbles in the glass, all lights on it are working beautifully & looking great. Looks great & sounds even better! All tone controls are working perfectly. Tape inputs & Aux inputs all working, I don't have a turntable