37 Results: New & Used in cortina in Klemzig 5087, SA

Here i have a set of rear springs supported with helper springs to be sold as a complete pair for $110 or the springs alone for $65 pr and the helpers for $55 pr. The front main eye rubbers are good .

Cortina boot channel sealing rubber . Unused .

Here is a nice and clean early Cortina MK1 headlight and horn column . The switch is clean and carries all of it 4 locating pins . Sometime time ago the gear change hole has been converted or blanked off for appearance sake , looks easy enough to convert back to the column gear change if desired .

Speedo workings to use as spares .

Front end comes with everything you see . Has been removed from a Consul as one unit and hasn't been put together from bits and pieces .

MK1 fuel filler pipe . $10 ea .

One passenger side disc shield with attaching bolts and lock tabs . Not rusted .

Here is a nice pre-airflow strip speedo and wiring harness . Comes with the Ignition barrel , Indicator flash unit and the original Consul voltage regulator unit that mounts in the passenger foot well . Also included is both sides of the engine bay wiring loom and the wiring harness through the roof to the tail lights and fuel sender . The drivers side engine bay harness had to be rewrapped and some plug in ends had to be changed to the correct colour coding .

63 Cortina Consul Steering Assembly .

If you have a rolling chassis and you cant steer it this will solve the problem .

Here we have a rear base seat only which is still good enough to use as is or for reupholstering

i have 4 hudcaps with the normal scuff marks , just zoom in for a closer look . One cap has a small indentation which is hard to see when you shuffle the caps around .

One set of wiper arms and blade holders ,

Cortina Consul wiper assembly , but you will need to cut out 2 sealing rubber gaskets .

Here are 2 Cortina regulators . One for a Cortina $12 and the Consul $15 .

2 Cortina MK1 front suspension tower caps , left and right replacements . One with some kind of numbers . $30 for both .

Cortina Steering Column tapered S/S securing screws . $12 free post .

MK1 interior light housing $10 . Sorry no lens .

A pair of plated Pivot Assy pins for a MK1 $12 . Also a pair of Pivot Assy Pins for ( i think , but not sure ) MK2 $30 . Please correct me if that is wrong .

Cortina mk1 front bumper-bar supports , sold in pairs .

Cortina Mk1 Pitmam Arm $12 . Tight Idler Arm and mount $ 15

Cortina mk1 (2) door roof , to suit 1/4 opening rear window model . Comes with lots of Lichen . No dents.

Assorted mk1 dash fittings . (O) Toggle switch nuts $8 pr posted . (L) Indicator cancelling cam $12 posted . (N) Wiper nuts and spacers $12 set posted . (C) Ignition switch and fasia bezel (sorry no keys ) $20 ea . Heater Fasia plug smaller size $5 . (S) Brake switch on foot pedal box under dash $8 posted . (D-E) Choke cable support bezel either size $8 posted ea . (A-B) Recessed bezels either size $6ea .

Cortina mk1 Front window stainless surround without joiners $15 . 3 piece rear window surrounds without joiners $20 .