51 Results: german helmet in Australia

Manufacturer Richard Lindenberg A.G. Remscheid Hasten, Circa 1916 - stamped ''Bell" L 64. An "in house" Bell rolling mill pattern stamp 060, is struck to the crown. The unique, dome spigots substantiate the maker's stamp. It was obtained in flawless, original, unmodified condition. No damage, no dents & no repairs. The painted finish was dilapidated & so was repainted in the original colour of Black Sand. It now presents exactly as it rolled off the production line in 1916. Bell helmets were th

Stahlhelm Circa 1917 stamped "NJ62" by maker Vereinigte Deutsche Nickelwerke, Schwerte. It is undamaged, unmodified & shows a good, aged patina in "NJ Graugrün". It has been stored since the end of the Great War & remains in undisturbed condition. The M17 liner is complete & original (ring, leather & cotton pads) & presents in pristine condition. Further, detailed photos are available. Postage is available

Produced in 1916 & stamped ET64 by Eisenhuettenwerke Thale A.G., Thale /Harz. The plate heating batch number BW280 is stamped to the inside of the crown & identifies the steel rolling mill as Stahlwerk Becker, Kiefeld. It was found in original condition with no damage, dents, rust or evidence of repair or modification. The painted finish was thin with losses. It was repainted in a colour identical to the original, which was standard ET production Graugrun. The chinstrap & liner were replaced wi

Very Rare WW1 Imperial German Army M16 Tortoise Camo Helmet (Original/Restored) The Stahlhelm ('steel helmet') is a German military steel combat helmet intended to provide protection against shrapnels and fragments or shards of grenades. The term Stahlhelm refers both to a generic steel helmet and more specifically to the distinctive German military design. The armies of major European powers introduced helmets of this type during World War I. The German Army began to replace the traditional

WW1 issued & stamped to the crown by the maker "Julius Jansen Strassburg 1916". The neck piece "halswache" is stamped in ink "BAIX" which translates to Armee Korps Altona mannschaften issue. It is also stamped size 54 in ink & shows the initials of the issuing quatermaster. It is a high quality helmet & is finished with helmewappen escutcheons. The mounts are steel in the traditional WW1 Feldgrau oxidised finish. They are all original & matching including the chinstrip hardware. The spike, as w

Description This compressor set is designed to be used with airbrush and small spray guns. And they can be used for all airbrush applications, spray tanning, modeling, make up, tattoos, T shirt's, nail art and bike helmet,etc. The professional airbrush set consists of a mini compressor, two airbrush guns and other accessories: 1. Mini Piston Compressor This oil-free piston compressor with air regulator, air filter and manometer is suitable for all airbrushes with the nozzle size of 0.2 - 1.0

Stamped by the manufacturer K64 J & H Kerkmann, Ahlen Westfalen, Circa 1917. A rolling mill heating lot number R822 (Stahlwerk Röchling, Volkingen), is stamped to the inside of the crown. It presents in original, undamaged & unmodified condition. The factory camouflage paint finish is visible, intact & preserved. It exhibits a good, unmolested patina. A replacement steel framed, goat skin liner is fitted. It is a high quality, stitch by stitch accurate replica & includes horse hair packed pillo

Stamped G62 by manufacturer Gebrüder Gnüchtel A.G. Lauter i.Sa. Circa 1916. It presents in well conserved condition. It is undamaged & unmodified & exhibits a good patina. The original, multicoloured, "Feldgrau" based camouflage paint is still visible. A rolling mill heating batch number R667 (Stahlwerk Röchling, Volkingen) is stamped to the crown. A quality replacement leather liner, fitted with authentic split pins, is included. Further detailed photos are available. Postage is available.

1.5kg, steel, replica, head girth(56-63)(cm)

1.5kg , head girth 56-63(cm),replica, price does not include shipping fee.

It is stamped Q66 (in the factory gothic script) by the manufacturer "Quist" F.W. Quist, Esslingen/Neckar. There is also a rolling mill heating batch number E172 stamped to the inside of the crown. It is painted in asymmetric camoflage of the Imperial German Navy circa 1917. It shows no evidence of damage, repair or modification. The original M17 liner, which was suffering age deterioration, has been discarded & an identical replacement, in sheepskin with the steel band painted in feldgruen, ha

steel, 1.2kg, black, replica, price including postages, shipping within Australia.

A genuine WW1 "Fireman's Helmet" that presents in unmodified, original condition. It is complete & undamaged. Postage is available.

An impressive, original M17 stahlhelm stamped Si62 Eisenhuette Silesia, Paruschowitz Oberschlesien. It was produced in factory Feldgrun & was later painted winter camouflage. It remains undisturbed & displays a good patina. The liner band & 2 split pins are original. The leather liner tongues & pillows have been replaced. A heating lot stamp Oberschlesien, Bismarckhutte, to the inner dome, is visible under ideal lighting conditions. There is no evidence of damage, repair or modification anywher

Manufacturer Richard Lindberg A G Remscheid Hasten Circa 1916 - stamped Bell L 64. A rolling mill heating stamp is numbered R439 Stahlwerk Rochling Volkingen & is struck to the inner crown. The unique dome spigots substantiate the maker's stamp. It presents in unusually good condition with no damage & a good patina. It has no dents & no repairs. The liner has been replaced. Bell helmets were produced only during WW1 & it was the only factory to use electric powered furnaces. This process produc

This compressor set is designed to be used with airbrush and small spray guns. And they can be used for all airbrush applications, spray tanning, modeling, make up, tattoos, T shirt's, nail art and bike helmet,etc.The professional airbrush set consists of a mini compressor, two airbrush guns and other accessories:1. Mini Piston Compressor This oil-free piston compressor with air regulator, air filter and manometer is suitable for all airbrushes with the nozzle size of 0.2 - 1.0 mm.- Features an

Dated 1915 & marked JR111, it bears the state issued Prussian Line Helmewappen & is fitted with the Mannschaften red & white Kokarde plus the Prussian State black & white Kokarde. It is completely original with no structural damage, repairs or substituted components. It shows a good, original, "parade presentation" finish. The structure of the helmet is solid, perfect in form & it has not been restored. The mounted spike, which is period correct, is removable & is a firm fit. The spine strap sl

This compressor set is designed to be used with airbrush and small spray guns. And they can be used for all airbrush applications, spray tanning, modeling, make up, tattoos, T shirt's, nail art and bike helmet,etc.The professional airbrush set consists of a mini compressor, three airbrush guns and other accessories:1. Mini Piston Compressor This mini reciprocating compressor housing with air control, air filter, manometer and gun holder is suitable for all airbrushes with the nozzle size of 0.2