ADVERTISEMENT
Sort

Filter & Refine

  • truck with work
View Layout
truck with workNew South WalesClear all

Top1992 FORD Trader

  • 278000 km
  • 6x2
  • 2440 kg(GVM)

Great honest truck thats just had a full service, new tyres and a new braking system fitted. Drives very well for its age and hasn't let us down. Carries 2 ton load. excellent tyres. Steel tray - 3m x 2m. Power steering, exhaust brakes. Seats 7. Pop up vent in roof gives excellent air flow. Heater works well.

$9,990Negotiable
Caringbah, NSW

Dealer used Dual Cab
10/05/2024

TopCar carrier truck with contract

$139,000
Minto, NSW

Car Transporters
07/05/2024

Top2011 Hino 500 FD8J FD 1024 White Cab Chassis 7.7l

  • 264891 km

Are you in the market for a reliable and powerful Cab Chassis Truck? Look no further than this Used 2011 Hino 500 FD. This rugged workhorse is ready to tackle any job you throw its way with its robust 7.7 Litre Diesel engine and Manual transmission. The Hino 500 FD is a true work companion, ideal for hauling heavy loads or navigating through tough terrains. Its durable construction and sturdy frame ensure that it can withstand the rigors of daily use without breaking a sweat. Whether you need

$52,990
Orange, NSW

Dealer used
09/05/2024

Top2010 ISUZU N Series Isuzu N Series NH NLR 200 Cab Chassis MWB 4x2 3.0DT WB:3360mm GVM:4500kg

  • 388600 km

## Warrantys up to 3 years available !! *(conditions apply)** ## ## tray size 2150mm wide x 4530mm Long ## ## Car Licence truck gvm 4490 ## ## drives great ## ## air conditioning ## ## power steering ## ## drives great ready for work !! ## * DELIVERY AVAILABLE AUSTRALIA WIDE ! *CONTACT 0.4.0.6.8.8.8.0.1.8 FOR FURTHER INFORMATION *Live Walk around available *YES we are Open 7 days A week !! *MON-FRI 8.30am- 4.30pm *SAT 8.30am - 3.30 pm *SUN 9:00 am- 3:00pm *Free local pick up from

$18,990
Fairfield East, NSW

Dealer used
09/05/2024

Top2021 Fuso Canter 515 Wide Cab

  • 150 hp
  • 17536 km
  • 4x2

Just arrived! 2021 Fuso Canter 515 Wide Cab with Alloy Tray. Only 17,536km. Features 150hp turbo diesel engine and is matched with Fuso 6 speed Automated transmission. - Balance of 5 Year/200,000km Fuso Factory Warranty until February 2027. - 4,495kg GVM car licence with 2 tonne payload and 3.5 tonne tow rating. - Features Fuso Safety Pack with Advanced Emergency Braking (AEBS), Lane Departure Warning System (LDWS) and Electronic Stability Program (ESP) making it the safest light truck on the

$53,900
South Murwillumbah, NSW

Dealer used Tray
10/05/2024

TopIsuzu 4x4 truck drill rig

$50,000Negotiable
Coonabarabran, NSW

Drill Rig
06/05/2024

1997 ISUZU NPS300

  • 31996 km
  • 4x4
  • 6000 kg(GVM)

10/1997 Isuzu NPS300 4x4 Single Cab Firetruck. Ex NSW Rural Fire Service travelled only 31,998 kms Isuzu 4.6 Litre 4 Cylinder Diesel,5 Speed Transmission with High/Low Range 4WD & Diff Lock 3 Seats,Polished Alloy Bullbar Fitted with Rural Fire Service Body with water tank,Honda GD411 Diesel fire pump & hose reel Multiple toolboxes & work lights Body L-3930 x W-2010. GVM 6000. Wheelbase 3400. Sold fully serviced with current inspection Price includes GST & Tax Invoice Competitive finance a

$39,950
Inverell, NSW

Dealer used Fire Trucks
16 hours ago

Nissan ud 12t table top

  • 300 hp
  • 234671 km
  • 6x2

Nissan ud 12t table top. TARE: 7600 GVM:22500 HEAVY RIDGED. great truck runs well and is ready for work. In body top end rebuild by previous owner in the last couple of years. Everything has been replaced or replaced. Everything works as it should. Aircon is nice and cold and heater works great. Only selling to by new car. Also interested in a swap for nice little SUV, ss wagon, ss, harley or boat, or maybe something of interest . Cash price negotiable. Send through offers via text. Or call. So

$28,000
Liverpool, NSW

Flat Deck
21 hours ago

Concrete Truck *** Rare Opportunity is now available ***

  • 319000 km
  • 4x2
  • 30000 kg(GVM)

Selling Hanson concrete truck with contract ending December 2027 with renewal option available. Great opportunity to secure a sound based business in a very busy plant supplying Sydney Metro. -Registered until 2 March 2025 -Well maintained and clean Isuzu truck. - 2 week training will be provided as a part of the sale -Easy to operate this business as it runs only for 5 and half days a week. -Plenty of night work also available, to boost monthly income. You can put additional driver for n

$250,000Negotiable
Pendle Hill, NSW

Concrete
10/05/2024

Skip Bin Truck Isuzu NPR 300

  • 201800 km
  • 4x2
  • 6200 kg(GVM)

Isuzu NPR 300 Skip Bin Truck 97 manual with only 210,000 klms. I have spent over $15k fixing and updating anything that it needed, some of the work is listed below. I have also stripped around 80% off the paint off the arms and struts as i was going to paint them in company color's. This owes me around $40k. Great truck, bargain price. Some of the work done: Replaced all suspension New reverse camera New reversing speaker New air compressor for the lifter New front engine fan New heating h

$24,500Negotiable
Korora, NSW

Skip Bin Loader
10/05/2024

1992 FORD Trader

  • 278000 km
  • 6x2
  • 2440 kg(GVM)

Great honest truck thats just had a full service, new tyres and a new braking system fitted. Drives very well for its age and hasn't let us down. Carries 2 ton load. excellent tyres. Steel tray - 3m x 2m. Power steering, exhaust brakes. Seats 7. Pop up vent in roof gives excellent air flow. Heater works well.

$9,990Negotiable
Caringbah, NSW

Dealer used Dual Cab
10/05/2024

2005 scania prime mover v8 580hp

  • 580 hp
  • 1011111 km

For sale or swap is my scania had plans for it but they have failed so I'm moving it on cheap Needs a little bit of a tidy up In a few places Needs a new exhaust tip Needs lh seat belt Steering wheel is worn And the back of cab Needs tidy up ,has about 1mil kms on it . A/c works Engine Runs sweet Gearbox & clutch is nice Tyres Good Everything else seems good No rego , selling as is or will swap for a tipper truck or a boat Located Cooranbong 35,000

$35,000
Newcastle Region, NSW

Prime Mover
10/05/2024

2021 Fuso Canter 515 Wide Cab

  • 150 hp
  • 17536 km
  • 4x2

Just arrived! 2021 Fuso Canter 515 Wide Cab with Alloy Tray. Only 17,536km. Features 150hp turbo diesel engine and is matched with Fuso 6 speed Automated transmission. - Balance of 5 Year/200,000km Fuso Factory Warranty until February 2027. - 4,495kg GVM car licence with 2 tonne payload and 3.5 tonne tow rating. - Features Fuso Safety Pack with Advanced Emergency Braking (AEBS), Lane Departure Warning System (LDWS) and Electronic Stability Program (ESP) making it the safest light truck on the

$53,900
South Murwillumbah, NSW

Dealer used Tray
10/05/2024

Nissan ud, tow truck 6 months rego

  • 484000 km
  • 9000 kg(GVM)

2007 UD tow truck, -6 Months Rego very good condition ready for TT -You can load two cars at a time, cradle works perfectly. -Tare weight 5660kg GVM 9000kg -Remote for the winch. -Long tray -$58000 negotiable.

$58,000Negotiable
Chester Hill, NSW

10/05/2024

Mitsubishi Fuso Fighter

  • 420000 km

Excellent truck- ready for work - All brand new tyres - clutch kit $6000 spend - 8 metre steel tray with container pin spots - led marker light all round - led head lights - - chassis and tray refreshed recently - Serviced every 5000km oil filter and fuel filters with high quality oils - owner driven - 6 speed gear box - Tare weight 6570 kg Gross vehicle mass 16000 kg flatbed truck tray top truck Mitsubishi

$29,950
Leppington, NSW

10/05/2024

2015 scania R560 (720,000km)

  • 560 hp
  • 720000 km

The truck has 720,000km and is in very good condition Work done -replaced all chasis suspension airbags -have redone all the seals on top of the engine -oil sump gasket has been changed -2 pistons and liners have been changed -front bonnet and lower bumper of the truck has been repainted - dashboard has been replaced due to being worn - certain dash panels for switches have been replaced due to being worn - oil cooler seals have been replaced - coolant has been replaced - engine has been fresh

$90,000
Wetherill Park, NSW

Prime Mover
10/05/2024

2016 Mitsubishi Fuso 515 Canter Turbo Diesel Refrigerated Pantech

  • 321001 km

2016 Mitsubishi Fuso Canter 515 Turbo Diesel Refrigerated Pantech Auto ! Fully Refrigerated Truck with Pantech Body ! Opportunity Knocking ! Start your business Today ! Best for food delivery, vegetable delivery, fruit delivery, meat delivery, removalist business, woolies / coles / Aldi contractor etc. Click on this link below to see over 400 Cars for sale on our website. https://mrcarsydney.com.au/ Call us to book an inspection today Mobile, O435, 781, 722, Address: No 5, 25 Edwa

$27,999
Rouse Hill, NSW

Dealer used
09/05/2024

2006 Isuzu N Series NKR 200 White Cab Chassis

  • 410000 km

2006 ISUZU NKR 200 CAR LICENSE 4495 gvm Are you looking for a heavy duty truck that's going to get the job done? LOOK no further! from the smallest job to the bigger ones this truck WILL get it done! We have built our reputation with supplying greater Sydney and interstate buyers great quality trucks that WONT let you down and this is one of them. Buy with confidence with our SUPERIOR nation wide warranty plans and invest your hard eared MONEY into an asset that's going to make you money

$9,500
Strathfield, NSW

Dealer used
09/05/2024

2010 ISUZU N Series Isuzu N Series NH NLR 200 Cab Chassis MWB 4x2 3.0DT WB:3360mm GVM:4500kg

  • 388600 km

## Warrantys up to 3 years available !! *(conditions apply)** ## ## tray size 2150mm wide x 4530mm Long ## ## Car Licence truck gvm 4490 ## ## drives great ## ## air conditioning ## ## power steering ## ## drives great ready for work !! ## * DELIVERY AVAILABLE AUSTRALIA WIDE ! *CONTACT 0.4.0.6.8.8.8.0.1.8 FOR FURTHER INFORMATION *Live Walk around available *YES we are Open 7 days A week !! *MON-FRI 8.30am- 4.30pm *SAT 8.30am - 3.30 pm *SUN 9:00 am- 3:00pm *Free local pick up from

$18,990
Fairfield East, NSW

Dealer used
09/05/2024

2011 Hino 500 FD8J FD 1024 White Cab Chassis 7.7l

  • 264891 km

Are you in the market for a reliable and powerful Cab Chassis Truck? Look no further than this Used 2011 Hino 500 FD. This rugged workhorse is ready to tackle any job you throw its way with its robust 7.7 Litre Diesel engine and Manual transmission. The Hino 500 FD is a true work companion, ideal for hauling heavy loads or navigating through tough terrains. Its durable construction and sturdy frame ensure that it can withstand the rigors of daily use without breaking a sweat. Whether you need

$52,990
Orange, NSW

Dealer used
09/05/2024

6 car carrier with national carrier

  • 560 hp
  • 1200000 km
  • 4x2

ANNUAL INCOME 320 k$, POTENTIAL 400 k$ with double shifts.A truck with a 6 cars trailer(the trailer belongs to the company) and position with national carrier. Great earnings. Work 5-6 days a week, the possibility of working double shifts and the involvenment of hired driver. Full training will be provided. Truck has full rebuilt engine with the warranty until 12/24.

Negotiable
Minto, NSW

Car Transporters
09/05/2024

1994 MITSUBISHI CANTER 4X4

  • 44077 km
  • 4x4
  • 4495 kg(GVM)

1994 Mitsubishi Canter 4x4 Single Cab Firetruck. Ex NSW Rural Fire Service travelled only 44,077 kms. Car Licence Mitsubishi 3.9 Litre 4 Cylinder Diesel,5 speed transmission with high/low range 4WD,3 seats Air conditioning,power steering,polished alloy bullbar Fitted with steel tray body with full NSW Rural Fire Service fitout including galvanised water tank,Hatz diesel with Quenchmaster Foam Proportioning System,Hise Reel,Multiple toolboxes & work lights Tray L-3540 x W-2000. GVM 4495

$36,950
Inverell, NSW

Dealer used Fire Trucks
09/05/2024

2013 Isuzu NPR 200 SITEC Series III 155 Turbo Diesel Manual 61,000kms

$42,000Negotiable
Strathfield, NSW

Pantech
09/05/2024

TRUCK WITHWORK FOR SALE

  • 300 hp
  • 481000 km
  • 6x4

2011 ISUZU FVM TIPPER TRUCK FOR SALE consistent 5 years work available contract renewed 4 months ago with reputable company 6 days a week 7 if needed. Selling due to family commitments $260+ turnover per year

$220,000
Bass Hill, NSW

Tipping Tray
08/05/2024

Mitsubishi Fuso Canter Tipper

  • 300758 km
  • 4x2
  • 65 kg(GVM)

2007 Mitsubishi Fuso Canter Tipper Truck. 300758 kms with 6 months rego. This truck has been well looked after and maintained. It has been freshly painted all over with an all new front end. Brand new gear box was installed approximately 2 years ago and truck has never missed a beat. Mechanically A1 condition and has a lot of get up and go with a whole new aircon system being installed 6 months ago. Tipper works perfectly with no leaks or damage to hydraulics and is very strong. Heavy duty seat

$33,000Negotiable
Marsden Park, NSW

Tipper
08/05/2024

Hino Truck - Tray Back

  • 234000 km
  • 4x2
  • 4495 kg(GVM)

FOR SALE 2007 Hino 300 - 4 Cylinder - Turbo Diesel - 5 Speed Manual - 234000kms - Alloy bull bar - Alloy tray (4500x2110x400) - Under tray toolboxes x2 - Tow bar - 4495gvm (only car license required to drive) - Reverse buzzer - 3 seater - Air con - Radio - Power windows - Central locking Great example of a well taken care of truck. READY FOR WORK! Inspections by appointment only Located at KINGS PARKS Can assist with: - Finance - Extended warranty - Interstate transport Thanks for vie

$23,990Negotiable
Kings Park, NSW

Tray Dropside
08/05/2024

Car carrier truck with contract

$139,000
Minto, NSW

Car Transporters
07/05/2024

Pantech bodies 4. 3M or 4.5M long for Isuzu, Hino, Hyundai, Fuso Fo

  • 0 km

4.5M & 4.3M long Pantech bodies. Buying a new Isuzu, Hino, Hyundai, Fuso or Foton cab chassis. Purchase a Droptruck Pantech box and save thousands on running costs with 680kg lightweight body. 2200mm W 2000mm H internal. Barn doors or Roller door add$1500 Fits 750mm Chassis width. We fit and supply Dhollandia 750kg tuckaways for $6000. Don't paid $19,000 for a heavy steel floor 1940 design box! These new technology lightweight, high strength aluminium composite panel boxes and are as strong as

$15,000
Mona Vale, NSW

07/05/2024

Isuzu FVL 1400 Long 2012 (14 pallet rigid with tailgate)

  • 543408 km

Isuzu FVL 1400 Long 2012. Manual transmission. 14 pallet curtain side rigid with Anteo tuck away tailgate loader. 543,408km. This is a company truck and owned since new. Always serviced at regular intervals and has been well maintained. This truck has also just passed a rego inspection in April with rego until June. New steer tyres and lazy axle tyres have just been fitted. The truck presents well for age and mileage. Exterior is good, just minor decal traces on doors. Interior is fair, but cou

$75,000Negotiable
Woodpark, NSW

06/05/2024

Isuzu 4x4 truck drill rig

$50,000Negotiable
Coonabarabran, NSW

Drill Rig
06/05/2024

Save search and get notified when new items are posted