116 views
Everlast Welders Powertig 225EXT AC/DC TIG Welder
$2,700
AVAILABLE FOR LOCAL PICKUP ON THE GOLD COAST ONLY!
If you are genuinely interested please message me directly!
For sale is my Everlast Welders Powertig 225EXT TIG welder.
Purchased a few years back in 2019, planned to use it for some personal projects but never had the time to set it up and use it. Looking to sell it to someone who will actually get some use out of it rather than it sitting away in storage.
The welder is still in new mint condition. It has never been run before, only taken out of the box. It has stayed stored away under drapes away from direct heat and light exposure its entire life.
The kit comes with the welder along with an accessory pack (MMAW torch, small and large TIG torch, ground clamp, control pedal, user manual, etc). No consumables included.
Just runs on a standard single phase 15A AU wall socket (with the larger ground pin)
Available for pickup locally in Molendinar on the Gold Coast.
CASH PAYMENT ON PICKUP
Specifications below (these are taken from the current edition EXT225 with the facelift but the machine specs should be the same FYI, does not have the High Voltage HF start and fans on demand feature)
IGBT Type: Module IGBT
Inverter Type: Digital/Micro-controlled
Output Type: AC/DC TIG, DC Stick
Voltage/phase: 400V 3 PHASE
Max Rated TIG Amps: 240V: 250A
Max Rated Stick Amps: 240V: 200A
TIG Amps @ Rated Duty Cycle: 240V
250A/20V @ 60% Duty Cycle/ 40º C
200A/18V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@240V: 38A
Maximum Rated (I1EFF ) Input Amps:
@ 240V: 30A
OCV:
90V/VRD: <24V
TIG Output Range DC:
240V:3A-250A/10.1V-20V
TIG Output Range AC:
240V: 5A-250A/ 10.2V-20V
Stick Ouput Range DC:
240V: 20A-200A/20.8V-29V
Stick Hot Start Amps: 0-100%
Stick Function: Adjustable Arc Force Control
Stick Hot Start Type: Adjustable Hot Start
Stick Hot Start Time: 0-2 Seconds
6010/Cellulose Capable: Yes
Minimum Amp DC TIG Start: 3A
Minimum Amp AC TIG Start: 5A
TIG Start Type: HF and Lift Start
Memory: Yes
Start Amp Range:
DC: 5A-250A
AC: 5A-250A
End Amp Range:
DC: 3A-250A
AC: 5A-250A
Upslope Time: 0-25 Seconds
Down Slope Time: 0-25 Seconds
Preflow time: 0-25 Seconds
Post Flow Time: 0-50 Seconds
TIG Pulse: Yes
Standard DC Pulse Frequency: .1-500 Hz
Standard AC Pulse Frequency: .1-250Hz
AC Advanced Pulse Frequency: .1-10Hz
Pulse Time On (Duty Cycle): 3-100%
Pulse Amp Range: 5-95%
AC Frequency (Hz): 20-250Hz
AC Balance Range: 5-90%
AC Wave Forms:
Advanced Square
Soft Square
Triangular
Sine
Remote Control:
2T/4T with Torch Amptrol settings
If you are genuinely interested please message me directly!
For sale is my Everlast Welders Powertig 225EXT TIG welder.
Purchased a few years back in 2019, planned to use it for some personal projects but never had the time to set it up and use it. Looking to sell it to someone who will actually get some use out of it rather than it sitting away in storage.
The welder is still in new mint condition. It has never been run before, only taken out of the box. It has stayed stored away under drapes away from direct heat and light exposure its entire life.
The kit comes with the welder along with an accessory pack (MMAW torch, small and large TIG torch, ground clamp, control pedal, user manual, etc). No consumables included.
Just runs on a standard single phase 15A AU wall socket (with the larger ground pin)
Available for pickup locally in Molendinar on the Gold Coast.
CASH PAYMENT ON PICKUP
Specifications below (these are taken from the current edition EXT225 with the facelift but the machine specs should be the same FYI, does not have the High Voltage HF start and fans on demand feature)
IGBT Type: Module IGBT
Inverter Type: Digital/Micro-controlled
Output Type: AC/DC TIG, DC Stick
Voltage/phase: 400V 3 PHASE
Max Rated TIG Amps: 240V: 250A
Max Rated Stick Amps: 240V: 200A
TIG Amps @ Rated Duty Cycle: 240V
250A/20V @ 60% Duty Cycle/ 40º C
200A/18V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@240V: 38A
Maximum Rated (I1EFF ) Input Amps:
@ 240V: 30A
OCV:
90V/VRD: <24V
TIG Output Range DC:
240V:3A-250A/10.1V-20V
TIG Output Range AC:
240V: 5A-250A/ 10.2V-20V
Stick Ouput Range DC:
240V: 20A-200A/20.8V-29V
Stick Hot Start Amps: 0-100%
Stick Function: Adjustable Arc Force Control
Stick Hot Start Type: Adjustable Hot Start
Stick Hot Start Time: 0-2 Seconds
6010/Cellulose Capable: Yes
Minimum Amp DC TIG Start: 3A
Minimum Amp AC TIG Start: 5A
TIG Start Type: HF and Lift Start
Memory: Yes
Start Amp Range:
DC: 5A-250A
AC: 5A-250A
End Amp Range:
DC: 3A-250A
AC: 5A-250A
Upslope Time: 0-25 Seconds
Down Slope Time: 0-25 Seconds
Preflow time: 0-25 Seconds
Post Flow Time: 0-50 Seconds
TIG Pulse: Yes
Standard DC Pulse Frequency: .1-500 Hz
Standard AC Pulse Frequency: .1-250Hz
AC Advanced Pulse Frequency: .1-10Hz
Pulse Time On (Duty Cycle): 3-100%
Pulse Amp Range: 5-95%
AC Frequency (Hz): 20-250Hz
AC Balance Range: 5-90%
AC Wave Forms:
Advanced Square
Soft Square
Triangular
Sine
Remote Control:
2T/4T with Torch Amptrol settings
- Date Listed:07/04/2024
- Last Edited:07/04/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Miller Syncrowave 250DXAC/DC Tig welder made in the USA built to last excellent quality & will weld to 310 amps , has a pulse board fitted , Miller cool mate 3 which plugs into the welder so will turn on with machine , 8 mtr water cooled tig torch , new earth lead ,new CIG auto helmet , new gas flow meter Machine is fully serviced & ready to weld can weld test before hand$4,400Ormeau, QLD•3w
- Giantz 220 Amp Inverter Welder MMA MIG DC Gas Gasless Welding Mac...The Giantz Portable Welder offers professional quality MIG/MAG/TIG/MMA welding with results that matter. It features IGBT DC inverter technology that allows a huge increase in duty cycle, deep penetration and a smooth welded finish. The machine can handle an array of electrodes and rod sizes. The output current is adjustable between 20A and 220A to produce flawless results with all kinds of metals including mild steel, stainless steel, carbon steel and even sheet metal. The advanced cooling sys$624.22SHIPPING OFFEREDBundall, QLD•39w
- YFE MULTIMETER HL3048YFE digital clamp meter AC/DC . Model: YF8030N . Digital multimeter to clamp to measure resistance, voltage, capacity and frequency. . Maximum opening of up to 53 mm. . Automatic indication of functions and units of measurement. . MIN/MAX push button. . Maximum intensity supports 1200 A. Visit us in store today at Shop L/20 Siganto Drive, Helensvale QLD 4212 or visit our website at hockandgo.com.au for more products. FREE SHIPPING or CLICK & COLLECT: We offer standard shipping FREE across mo$119Helensvale, QLD•62w
- Generator - 4500W Electric Petrol Digital Inverter
- Other
This generator is brand new, not been used, purchased when the power outage was on, but did not get to set it up, so it is still in the box. We are selling our home and no longer need to use it or set it up where we are. Because it is a large capacity (enough for two homes), there is no use for it where we are moving to. It was purchased for $2900.00 Westinghouse WP iGen4500s 4500W Electric Start Petrol Digital Inverter Generator The Westinghouse Digital Inverter Generator is an excellent port$2,370NegotiableTallebudgera Valley, QLD•3w - Cigweld Weldskill 205Ac/DC 002400310262Brand: Cigweld Colour: Black All photographs shown are of the actual item you will receive. We have a photographer in house that lovingly takes all the photos you see of the items we have in stock. We here at Cash Converters pride ourselves in the quality of our items. If you have any enquiries about this item or if you are unsatisfied with what you have purchased, please don't hesitate to contact us.$799Robina, QLD•1w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here