25 views
Villiers Piston Rings
$25
Sort of new Hepolite piston rings 63mm STD suit Villiers 1H two stroke. I have three sets of these. Some light rust but still very useable, can post at buyers expence.
- Date Listed:24/06/2018
- Last Edited:24/06/2018
- Condition:New
- Year:1955
- Motorcycle Model:Other
- Bike Type:Other
- Listing Type:Private seller
- Make:Other
- Engine Displacement (cc):225
Similar Ads
- KAWASAKI Z900 1976.IMMACULATE BIKE,RUNS PERFECT.Z1 900 CB750https://www.youtube.com/watch?v=fW_3YJpNHFQ PLEASE CLICK ONTO THE LINK ABOVE FOR A VIDEO OF THE BIKE. This Z9 has undergone a restoration. The bike has been back to a bare frame and built up from there. All the painted metal parts have been done in 2 pac paint. The bolts washers,springs etc have been rezinced. The engine was pulled down and the cases vapour blasted, The top end was rebored and fitted with new piston and rings and timing chain. The Valves lapped in and fitted with valve$35,000Coffs Harbour, NSW•27w
- KAWASAKI Z900 1976.FRESH ENGINE,SUPER CLEAN EXAMPLE.Z1 900kawasaki z900 1976 https://www.youtube.com/watch?v=NQT7459IyoE PLEASE CLICK ONTO THE LINK ABOVE FOR A VIDEO OF THE BIKE. OR COPY AND PASTE INTO YOUR BROWSER We have given this z900 a freshen up and a light resto. It has come up a treat. It is ready for rego and trouble free cruising. The engine has just had a topend rebuild. The cylinders were rebored and fitted up with new pistons,rings,gudgeons ,gaskets etc The cylinder block was vapour blasted while apart. The cylinder head was stripped$23,800Coffs Harbour, NSW•12w
- HONDA CR500 1990 FULL REBUILD IMMACULATEThis cr was torn down to a frame and built up from there. The frame and subframe were re painted in 2 pac paint. The engine bottom end was checked and is in vgc. The cylinder was rebored and fitted with a new piston and rings and gudgeon and bearing. New airstriker carb fitted. There is a complete new PVL ignition fitted. The wheels were rebuilt with new rims and spokes , The hubs were rapainted in 2 pac paint. New tyres and tubes fitted. The rear shock was rebuilt and the shaft was rechromed.$17,500Coffs Harbour, NSW•11w
- KAWASAKI Z900 1976.CLEAN BIKE,RUNS WELLhttps://www.youtube.com/watch?v=9XIskig2cm4 PLEASE CLICK ONTO THE LINK ABOVE FOR A VIDEO OF THE BIKE This is a nice clean ready to ride zed. The engine has had a new set of piston and rings installed. There is a new cam chain fittted. The engine cylinders and head and tappet cover were vapour blasted while apart. New oil.filter plugs etc were fitted. The carbs were cleaned and retuned.There is a new airfilter installed. There is a new delkivic ceramic coated 4/1 pipe fitted. The aftermarket les$22,500Coffs Harbour, NSW•7w
- YAMAHA TT XT500 PISTON ,NEW GENUINE 2ND OS FREE POSTNEW UNAVAILABLE FROM YAMAHA NOW. FREE POST PH# COFFS HARBOUR 2450$295Coffs Harbour, NSW•28w
- HONDA CB750 CYLINER,BARREL,TAPPET COVER,HEADCYLINDER WITH PISTONS $250 CYLINDER HEAD ,HAS ONE VALVE AND SPRING MISSING.FIN DAMAGED.$200 TAPPET COVER $150 CAN POST OUT AUSTRALLIA WIDE. PH#$120Coffs Harbour, NSW•191w
- HONDA CBX1000 1981.RUNS WELL,CLEAN BIKE,LOW KS
- 20000 km
This is a very clean low mile example. The engine is in very good running condition. The bike has done a low 14k miles from new. The previous owner installed a big bore piston kit. Ported the cylinder head.Fitted a 6/1 exhaust. k/n air filters,front Fork brace, Fox rear shock.Corbin seat. Braided brake lines fitted all round. Auxillary oil pressure and oil temp gauges fitted. We have serviced the engine with fresh oil,filter,spark plugs, The carbs were removed,cleaned and retuned, Va$19,800Coffs Harbour, NSW•29w - Honda 125 CT TL SL etc
- 125 cc
New cylinder Good useable Head and Cam No piston No valve springs$150NegotiableDorrigo, NSW•69w - TRACKBIKE RACEBIKE BUCKET RACER
- 150 cc
- 1234 km
Australian designed Supermono Trackbike Dyno tunned ZONGSHEN YX150 Race Engine Flat slide carb, ported head, extra heavy valve springs, High comp piston , oil cooler Ready to race$1,199Maclean, NSW•1d - HUSQVARNA WR400 1986 .CLEAN BIKE,RUNS WELL.This a great vinduro bike. The engine runs well but is due for rings. The front end is off a husaberg ,The original front end and wheel and speedo and bash plate etc is included. The back ohlins shock is in vgc. Lower frame rails are in vgc. New airfilter. There is no compliance plate fitted, It can be regod if you apply for and import approval for it LOCATED IN COFFS HARBOUR NSW 2450 AUSTRALIA ----------------Feel free to call Rob on with any questions Ph$4,995Coffs Harbour, NSW•42w
- Harley Davidson motorcycle parts
- 1745 cc
STD parts from a 2023 sport glide m8, they have had little use from new, have left the carbon on the pistons to show what its done. All parts are in excellent condition, can post at buyers expence.$600Bonville, NSW•5w - Suzuki B120 top throttle cable
- 120 cc
Suzuki B120 top throttle cable, new old stock, may fit other models with some research, can post at buyers expence.$25Bonville, NSW•24w - Hella tailight lenses to fit Messerschmitt micro carPair of Hella K2647 tailight lenses to suit a Messerschmitt Micro car. These are extremely rare and hard to find. They are not cracked, broken, or faded, there are surface scratches only and the paint needs redoing. They have not been used for ash trays, can post at buyers expense.$160Bonville, NSW•25w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3636