81 views
Forklift Tow Jib Attachment Free Pickup Lawnton Warehouse
$610
Product Name: EW-FJ-TOW Forklift Tow Ball Jib Attachment 2000kg
Same Day Pickup Lawnton Warehouse
Part No: EW-FJ-TOWB
Product Price: $610.00 plus GST
New Equipment
At last a multi-purpose forklift jib for towing and lifting! The EW-FJ-TOW Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation. Fully certified to all relevant Australian standards.
The type EW-FJ-TOW Forklift Tow Jib Attachment has been designed as a simple Slip-on Jib attachment with 2 hook positions 585mm apart and a 50 Tow Ball fitted at the front of the Jib. Both hook positions have a WLL of 2000kg – refer diagram below. When using the Tow Bar, the Tow weight
is not to exceed 500kg and the minimum capacity of the Forklift is to be 2 Tonne.
The Unit is supplied with 2 Fork Arm Retaining Toggle Pins to prevent the Jib from moving off the Fork Arm.
The Standard Finish on the Type EW-FJ-TOW Forklift Tow Jib Attachment is Zinc Plated.
NOTE: Only suitable for 1070mm forklift tynes
Note that the towing of trailers by a forklift fitted with a tow jib can impose overturning forces on the forklift and additional force on the mast and braking system. The load being towed must be no greater than 25% of the mass of the forklift. Towing should be carried out in a slow, smooth and controlled manner and on level ground. Sharp turning must be avoided at all time to prevent jack-knifing of the trailer.
Specifications:
• Working Load Limit kg 2000kg
• Maximum Towing Capacity 500kg
• Unit Weight (Kg) 45kg
• Load Centre (mm) 1160mm
• Pocket Size (mm) 140mm x 65mm
• Pocket Centres (mm) 250mm
• Horizontal Centre of Gravity (mm) 655mm
• Vertical Centre of Gravity (mm) 30mm
Same Day Pickup Lawnton Warehouse
Overnight shipping to most locations available
- All prices exclusive of GST
- 12 Month Factory Warranty
-Overnight shipping to most locations available
- Lawnton warehouse Pickup or delivery available (call for delivery quote)
- Tax Invoice Provided
Payment options:
- Credit Cards (Visa, MasterCard and Amex Welcome (No Surcharge))
- Bank Transfer, Bpay, ZipPay
Equipment Warehouse Pty Ltd
Sydney - Brisbane - Melbourne - Adelaide - Perth
Equipment Warehouse Pty Ltd
Lawnton warehouse
Phone number: 07 ****7444
bri******@******.au
http://liftingequipmentbrisbane.com.au
Same Day Pickup Lawnton Warehouse
Part No: EW-FJ-TOWB
Product Price: $610.00 plus GST
New Equipment
At last a multi-purpose forklift jib for towing and lifting! The EW-FJ-TOW Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation. Fully certified to all relevant Australian standards.
The type EW-FJ-TOW Forklift Tow Jib Attachment has been designed as a simple Slip-on Jib attachment with 2 hook positions 585mm apart and a 50 Tow Ball fitted at the front of the Jib. Both hook positions have a WLL of 2000kg – refer diagram below. When using the Tow Bar, the Tow weight
is not to exceed 500kg and the minimum capacity of the Forklift is to be 2 Tonne.
The Unit is supplied with 2 Fork Arm Retaining Toggle Pins to prevent the Jib from moving off the Fork Arm.
The Standard Finish on the Type EW-FJ-TOW Forklift Tow Jib Attachment is Zinc Plated.
NOTE: Only suitable for 1070mm forklift tynes
Note that the towing of trailers by a forklift fitted with a tow jib can impose overturning forces on the forklift and additional force on the mast and braking system. The load being towed must be no greater than 25% of the mass of the forklift. Towing should be carried out in a slow, smooth and controlled manner and on level ground. Sharp turning must be avoided at all time to prevent jack-knifing of the trailer.
Specifications:
• Working Load Limit kg 2000kg
• Maximum Towing Capacity 500kg
• Unit Weight (Kg) 45kg
• Load Centre (mm) 1160mm
• Pocket Size (mm) 140mm x 65mm
• Pocket Centres (mm) 250mm
• Horizontal Centre of Gravity (mm) 655mm
• Vertical Centre of Gravity (mm) 30mm
Same Day Pickup Lawnton Warehouse
Overnight shipping to most locations available
- All prices exclusive of GST
- 12 Month Factory Warranty
-Overnight shipping to most locations available
- Lawnton warehouse Pickup or delivery available (call for delivery quote)
- Tax Invoice Provided
Payment options:
- Credit Cards (Visa, MasterCard and Amex Welcome (No Surcharge))
- Bank Transfer, Bpay, ZipPay
Equipment Warehouse Pty Ltd
Sydney - Brisbane - Melbourne - Adelaide - Perth
Equipment Warehouse Pty Ltd
Lawnton warehouse
Phone number: 07 ****7444
bri******@******.au
http://liftingequipmentbrisbane.com.au
- Date Listed:17/05/2023
- Last Edited:05/10/2023
- Condition:New
Similar Ads
- stackable stillage industrial mesh metal cages for storagegalvanized stillage metal cages, collapsible and stackable Free delivery Sydney Brisbane and Canberra region. minimum order 10 cages for free delivery 300 available Christmas sale Nearly new like brand new Warehouse solutions, easy move with pallet jacks and forklift... mesh, stillage, cages, storage, wire mesh, wire and pallet cage$110Brisbane City, QLD•23w
- New 4-15 ton 600mm Doherty Excavator Deep Trenching Banana GP BucketThe price includes GST. New High Capacity 600mm Doherty / RF-System, Excavator / Backhoe Deep Trenching Banana GP Bucket suit 4-15 Ton machine. Strong and well engineered, made in Sweden by RF-System AB (RF): https://rf-system.se/en/ It was surplus stock from Doherty Couplers and Attachments (Australia & New Zealand), who add headstocks to these skins and rebrand as Doherty buckets. It has Tapered sides so mud slides out easily and there are extra Wear Strips welded underneath for durability$980Pullenvale, QLD•5w
- New 30-46 ton (100mm pin) Excavator Headstock Hitch Mounting PlateThe price includes GST. 100mm pin Excavator Headstock to suit 30-46 ton machines. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Headstock setup: 100mm Pin Diameter, 570mm Pin Center to Pin Center (CtoC), 422mm Between the inside Ear Bosses (which can be shaved back up to 458mm between the Ear Plates if you ne$980Pullenvale, QLD•5w
- New 3-5 ton (40mm pin) JB Excavator Mechanical Quick Hitch CouplerThe price includes GST. New JB Attachments Excavator Mechanical Quick Hitch Coupler to suit 3-5 Ton machines. Want a quick hitch but don't have any spare auxiliary hydraulic lines for a hydraulic hitch? This hitch is identical to a hydraulic hitch setup and there is no need to pull either of the 40mm pins out of your buckets like some manual hitches require. Instead you simply sit the lower front hooks of the hitch over your bucket's front pin and rock the hitch back so it seats fully into t$1,250Pullenvale, QLD•5w
- New 3-7 ton (45mm pin) Volvo Excavator Hydraulic Quick Hitch CouplerThe price includes GST. New Excavator Hydraulic Quick Hitch Coupling to suit 3-7 Ton machines. Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). It has a low profile and light weight. Strong and well engineered. Made by Volvo in Ireland. It is brand New, never used. It was fitted to a new Volvo ECR58 and shipped to Australia then removed by Volvo when their customer wanted a tilting hitch fitted. It then sat in a Volvo warehouse for 5 year$2,650Pullenvale, QLD•5w
- New 4-12ton 300mm Doherty Excavator Deep Trenching Banana Gummy BucketThe price includes GST. New High Capacity (250 Liters) 300mm Doherty / RF-System, Excavator / Backhoe Deep Trenching Banana Gummy Bucket suit 4-12 Ton machine. Strong and well engineered, made in Sweden by RF-System AB (RF): https://rf-system.se/en/ It was surplus stock from Doherty Couplers and Attachments (Australia & New Zealand), who add headstocks to these skins and rebrand as Doherty buckets. The side cutting edges are thicker than the rest of the bucket to help reduce wear, and it has$760Pullenvale, QLD•5w
- Giantz Tractor Seat Forklift Excavator Universal Backrest Truck PU ChEnhance Your Working Comfort with the Giantz Tractor Seat Forklift Excavator Universal Backrest Truck PU Chair Upgrade your experience with heavy machinery with the Giantz Tractor Seat. Priced at $206 with free shipping Australia wide, this universal seat provides the comfort and support needed for long hours of work. Crafted with fore and aft sliding track adjustment up to 150mm, along with a thick padded seat upholstered in high-quality black PU leather, this seat is designed to optimize you$206Brisbane City, QLD•1d
- Wine Barrel RackingGorilla brand wine barrel racks. 2 sizes available. Standard Hogshead type: Designed for 300L barrels. Measures 360mm H x 1300mm L x 870mm D Barrel cradle measures 450mm W Standard Puncheon type: Designed for 500L barrels. Measures 389mm H x 1490mm L x 945mm D Barrel cradle measures 500mm W 14 of each size available. Collection only - pickup in Brisbane. Forklift on site if required.$80Brisbane City, QLD•4w
- 2 INFLATABLE AIR DANCERS, 1 FAN INCLUDED - AWESOME MARKETING TOOL𝐖𝐄 𝐀𝐑𝐄 a warehouse all items are 𝐁𝐑𝐀𝐍𝐃 𝐍𝐄𝐖 and ready for 𝐈𝐌𝐌𝐄𝐃𝐈𝐀𝐓𝐄 𝐒𝐇𝐈𝐏𝐌𝐄𝐍𝐓 or 𝐏𝐈𝐂𝐊𝐔𝐏. 𝗔𝗨𝗦𝗧𝗥𝗔𝗟𝗜𝗔𝗡 𝗪𝗔𝗥𝗘𝗛𝗢𝗨𝗦𝗘 𝗟𝗢𝗖𝗔𝗧𝗘𝗗 𝗔𝗧 10 RICHARDS RD, NARANGBA, QLD 4504 (we Courier fast all over Australia) 𝗦𝗠𝗦 𝗼𝗿 𝗖𝗔𝗟𝗟 𝗗𝗜𝗥𝗘𝗖𝗧 # 𝟬𝟰𝟭𝟰𝟮𝟯𝟳𝟱𝟳𝟯 (𝗔𝗻𝘆𝘁𝗶𝗺𝗲) WhatsApp # 𝗢𝗿𝗱𝗲𝗿 𝗕𝗲𝗳𝗼𝗿𝗲 𝗖𝗼𝗺𝗶𝗻𝗴 𝗗𝗼𝘄𝗻 This simple and effective marketing tool is proven as one of the best value for m$870Brisbane City, QLD•105w
- Fairy Floss Machine NEW MODEL - High Performance & High Output𝐇𝐈𝐆𝐇 𝐎𝐔𝐓𝐏𝐔𝐓 𝐅𝐋𝐎𝐒𝐒 𝐌𝐀𝐂𝐇𝐈𝐍𝐄 𝐒𝐈𝐌𝐈𝐋𝐀𝐑 𝐓𝐎 $𝟐𝟓𝟎𝟎 𝐌𝐀𝐂𝐇𝐈𝐍𝐄 𝐄𝐐𝐔𝐈𝐕𝐀𝐋𝐄𝐍𝐓𝐒 𝐖𝐄 𝐀𝐑𝐄 a warehouse all items are 𝐁𝐑𝐀𝐍𝐃 𝐍𝐄𝐖 and ready for 𝐈𝐌𝐌𝐄𝐃𝐈𝐀𝐓𝐄 𝐒𝐇𝐈𝐏𝐌𝐄𝐍𝐓 or 𝐏𝐈𝐂𝐊𝐔𝐏 𝗔𝗨𝗦𝗧𝗥𝗔𝗟𝗜𝗔𝗡 𝗪𝗔𝗥𝗘𝗛𝗢𝗨𝗦𝗘 𝗟𝗢𝗖𝗔𝗧𝗘𝗗 𝗔𝗧 10 RICHARDS RD, NARANGBA, QLD 4504 (we Courier fast all over Australia) 𝗦𝗠𝗦 𝗼𝗿 𝗖𝗔𝗟𝗟 𝗗𝗜𝗥𝗘𝗖𝗧 # 𝟬𝟰𝟭𝟰𝟮𝟯𝟳𝟱𝟳𝟯 (𝗔𝗻𝘆𝘁𝗶𝗺𝗲) WhatsApp # 𝗢𝗿𝗱𝗲𝗿 𝗕�$1,255Brisbane City, QLD•58w
- Gas Cylinder Storage Cage - 4 Forklift Cylinders In Stock BrisbaneProduct Name: Gas Cylinder Storage Cage - 4 Forklift Cylinders In Stock Brisbane Part No: EW-GCSC-4FC-B Product Price: $830.00 plus GST New Equipment - Gas cylinder storage cage for storage of 4 x 15kg LPG Gas Cylinders - Sturdy Steel Construction - External Dimensions 787mm (width) x 762mm (depth) x 890mm (height) - Internal Dimensions 695mm (width) x 720mm (depth) x 750mm (height) - Lockable - Signage Included - Meets Australian Standards AS4332 Overnight shipping to most locations available$830Brisbane City, QLD•14w
- Tilt Forklift Jib Short 2500kg Zinc In stock BrisbaneProduct Name: Tilt Forklift Jib Short 2500kg Zinc In stock Brisbane Part No: EW-TJS-2500B Product Price: $1,920.00 plus GST New Equipment Multiple load positions via a telescoping boom Multi-angle options allows extra height and load capacity and is easy to set using the 4-stage locking pin Designed in accordance with AS2359 Zinc-plated finish Capacity rated hooks and swivel included Supplied with rating plate and user manual Easy locking pins or chains to secure attachment to the lift truck Wi$1,920Brisbane City, QLD•14w
- Bund / Spill Stand (4 Drum bund) In stock BrisbaneProduct Name: Bund / Spill Stand (4 Drum bund) In stock Brisbane Part No: EW-DB4-C Product Price: $500.00 plus GST New Equipment Suits 4 x 205 litre drums Close spacing support bars allows direct placement of large or small drums Timber pallets may be fitted within the raised skirt if required Elevated base allows transport by forklift or pallet trolley Steel fabricated, non-flammable unit Exceeds minimum spill capacity in accordance with Australian Standards for ‘portable’ units Zinc finish Sp$500Brisbane City, QLD•14w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 6699