209 views
VICTA POWERTORQUE MOWER PARTS
$99 Negotiable
The parts shown in the pics are from Victa Powertorque mowers, with the pics of most items being self-explanatory and not needing further comment. Where appropriate further detail / explanation is provided below.
Pics Victa 1 and Victa 2 are pics from different angles showing all of the items.
Pic Victa 2a identifies recoil starters 1 and 2 and air intake / throttles 1 and 2
• recoil starter 1 functions fine and has been cleaned inside but has no recoil spring. The cord is ok.
• recoil starter 2 is fully functional, cord is fine.
• air intake / throttle 1 hose is in good condition but has no air filter and the throttle cable is seized and removed – cable is included as it has a screw fitting needed when replacing.
• air intake / throttle 2 is in very good condition, includes cleaned filter and throttle cable works fine.
Pic Victa 3a identifies as 1, the G4 carburettor in parts that goes with air intake / throttle 1 and some extra carby parts as well. The carby o-rings are a mix of about 50% used and 50% new
Pic Victa 4a identifies as:
• 1, a fuel tank in good condition, with cock and filter, cleaned inside, and the engine “cowling / cover” it fits to.
• 2,
• 3, carby throttle / engine stop components, most new some used.
• 4, plastic mower wheel / axle spacers.
Pic Victa 5a identifies as:
• 1, the G4 carby (complete except for needle, float, jet/filter shown in Pic Victa 3a) that goes with air intake / throttle 2
• 2, 4 unused mower blade bolts
• 3, 6 engine barrel / recoil starter bolts
• 4, 4 wheel to axle securing clips.
Also in this pic are 4 wheel centre covers, 2 mower handle securing screw clamps, and a fuel cap.
Parts are for sale as “a lot”, pickup at Buderim on the Sunny Coast or will post at buyers cost (but will seperate) – I have a cardboard box that will fit the air intake items without damaging them by coiling too tight.
Pics Victa 1 and Victa 2 are pics from different angles showing all of the items.
Pic Victa 2a identifies recoil starters 1 and 2 and air intake / throttles 1 and 2
• recoil starter 1 functions fine and has been cleaned inside but has no recoil spring. The cord is ok.
• recoil starter 2 is fully functional, cord is fine.
• air intake / throttle 1 hose is in good condition but has no air filter and the throttle cable is seized and removed – cable is included as it has a screw fitting needed when replacing.
• air intake / throttle 2 is in very good condition, includes cleaned filter and throttle cable works fine.
Pic Victa 3a identifies as 1, the G4 carburettor in parts that goes with air intake / throttle 1 and some extra carby parts as well. The carby o-rings are a mix of about 50% used and 50% new
Pic Victa 4a identifies as:
• 1, a fuel tank in good condition, with cock and filter, cleaned inside, and the engine “cowling / cover” it fits to.
• 2,
• 3, carby throttle / engine stop components, most new some used.
• 4, plastic mower wheel / axle spacers.
Pic Victa 5a identifies as:
• 1, the G4 carby (complete except for needle, float, jet/filter shown in Pic Victa 3a) that goes with air intake / throttle 2
• 2, 4 unused mower blade bolts
• 3, 6 engine barrel / recoil starter bolts
• 4, 4 wheel to axle securing clips.
Also in this pic are 4 wheel centre covers, 2 mower handle securing screw clamps, and a fuel cap.
Parts are for sale as “a lot”, pickup at Buderim on the Sunny Coast or will post at buyers cost (but will seperate) – I have a cardboard box that will fit the air intake items without damaging them by coiling too tight.
- Date Listed:18/05/2022
- Last Edited:27/02/2023
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Victa & Masport Lawn Mower Catchers .I Won't Be Replying To Still Available Will Not Fit Through Gumtree Try before you Buy . $20 EACH .$20Buderim, QLD•107w
- Caltex Metal 5 Litre Mower Fuel CanHere we have a Good Used Condition Caltex 5 litre Metal Fuel Can. Please refer to the photos as they form part of the description and are of the actual item. Local pick up is in Maroochydore. .$5Maroochydore, QLD•133w
- John Deere fabricated mower deck42" John Deere fabricated mower deck, made in Australia, out of 3mm steel. Deck needs to get fabricated (photo's only as example) Need old deck for measurements. Skin only, or can put pulley on from old deck. Please call for more details.$1,700SHIPPING OFFEREDConondale, QLD•90w
- mower deck repair greenfieldRide-on mower deck repair, aluminium and steel. Also after market deck fabrication (replica of old one). All brands welcome. No job too small. Price varies per model and repair. Steel replacement decks for all Greenfields aluminium decks. All repairs done by qualified certificate IV higher engineering trades person. Price is POA and/or quote. Nation wide delivery available.$250Conondale, QLD•325w
- Rover self propelled Endeavor lawn mower 12A-H2R7333, 53cm deckStore Wide Clearance, 37 Technology Drive, Warana Open Monday to Friday 9am-3pm and Saturday 9am-12pm. 5x self propelled $450 each 1x non self propelled $350 Description Rover's Endeavour mower has four swing back blades for superior cutting and catching, a fabric catcher with a fabric top, and a safe stop engine brake. The 196cc OHV engine is powerful and uses self-propulsion, while the mower features a 53cm steel deck and a three in one mulching, catching and side throw capability. A soft$450Warana, QLD•5w
- Gardenline battery operated Mower & Line Trimmer + 3 BatteriesMower with catcher, can be adjusted to various heights easily- operated via x2 batteries Line trimmer - operated via x1 battery Price includes all items - mower, line trimmer and three batteries. (Pick up only) I replaced my small patch of turf in the front with artificial turf so no longer need these. I do have a charger for the batteries but this now no longer works - happy to pass this on too if you are savvy fixing these types of things it could potentially work again… New batteries and$120Maroochydore, QLD•2d
- Ride on Mower Wheel & TyreI do not reply to auto messages 195/55R10C Tyre with rim .$20Sippy Downs, QLD•294w
- Toro fabricated mower deckToro fabricated deck, made in Australia from 3mm steel. Photos are from a 50" and 42". Skin only. Need old deck for measurements. 2 spindles from $ 1800 3 spindles from $ 2000 Please call for more info.$1,800Conondale, QLD•90w
- new replica aftermarket greenfield mowerdeckNew replica aftermarket mowerdecks for Greenfields and all other major brands. Need to have the old deck, except the Greenfiels, to make a new one. Made out of 3mm Australian steel. See pictures. Call for more info. Sorry no offers on this item. Item is not in stock, needs to be manufactured in our shop. Current lead time is 3 weeks. Here a nice review from a customer: Hi Nicola, just letting you know that I have finally managed to have the cutting deck installed on my Greenfield 34" Fastcu$800Conondale, QLD•337w
- Ride on Lawn Mower Wheels & TyresI Won't Be Replying To Still Available Kenda Super Turf 16 X 6.50 - 8 Tyres . Hold Air . Plenty Of Tread . $150 For The Pair NO HOLDS Same Day Pick Up .$150Buderim, QLD•10w
- NEW (USED ONCE) - GOLF CLUB TORQUE WRENCH/TOOLThis genuine TaylorMade adjustment / torque tool - works with all adjustable clubs, ie TaylorMade, Mizuno, Callaway, PING, Titleist etc drivers, fairway woods, hybrids etc. Pictures are of the actual tool and its original packaging. I sold my TM driver head to someone who was upgrading and already had a tool. Can pick up at Buderim on the Sunny Coast.$20NegotiableBuderim, QLD•1w
- 17” NITTO TERRA GRAPPLER G2 A/T TYRESThree used tyres, plenty of tread for RWC, suit off-road trailer or for spare. Review below FYI. https://www.autocraze.com.au/nitto-terra-grappler-g2-reviews/ Will separate and price is negotiable, can pick up at Buderim on the Sunny Coast – price is for 3 tyres.$75NegotiableBuderim, QLD•2w
- EURO APPLIANCES CURVED GLASS CANOPY RANGE HOODThis 60cm glass canopy rangehood is for sale at a parts price as it gradually stopped working. First the lowest speed, then the mid-speed, then the high speed. Parts are available and are simple to change but I don’t have the resources to test it since I retired, and the local service rep couldn’t come to check it out ($150 turn up fee) for 4 weeks so you can imagine what “she who must be obeyed” said about that. Besides its elegant looks it’s extraction capacity of 700m3/hr is terrific for wok$50NegotiableBuderim, QLD•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 0618