396 views
Hafco Woodmaster DC-3 Dust Collector
$250
Motors were used to extract air, they are clean with no dust in them. All other parts are unused brand new in its box. We have a few of these extractors in stock so if you are seeing this ad we still have them in stock.
The HAFCO Woodmaster DC-3 Dust Collector is a low pressure, high volume (LPHV) extraction system that efficiently removes large quantities of waste from equipment such as planers, thicknessers and wood lathes.
Also known as a chip collector, this extractor features 1200cfm airflow suction thanks to its 2Hp (1.5kW)/240V motor. Dust and shavings collected are sucked through twin Ø100mm inlets by the impeller fan blade. Waste then falls into the lower bag, the air being exhausted through the top filter bag, collecting some of the fine dust on the way.
The DC-3 Dust Collector has quick-action clamps fitted on both the top and bottom bags. The 5 micron fine filter bag is held in place by the top bag support arm.
This portable piece of equipment is completely manoeuvrable thanks to its four swivel wheels and convenient push handle.
Features
1200cfm air flow suction
Portable on wheels
Ø100mm twin inlets
Quick-action clamps
5 Micron fine filter bag
1.5kW / 2hp 240V motor
The HAFCO Woodmaster DC-3 Dust Collector is a low pressure, high volume (LPHV) extraction system that efficiently removes large quantities of waste from equipment such as planers, thicknessers and wood lathes.
Also known as a chip collector, this extractor features 1200cfm airflow suction thanks to its 2Hp (1.5kW)/240V motor. Dust and shavings collected are sucked through twin Ø100mm inlets by the impeller fan blade. Waste then falls into the lower bag, the air being exhausted through the top filter bag, collecting some of the fine dust on the way.
The DC-3 Dust Collector has quick-action clamps fitted on both the top and bottom bags. The 5 micron fine filter bag is held in place by the top bag support arm.
This portable piece of equipment is completely manoeuvrable thanks to its four swivel wheels and convenient push handle.
Features
1200cfm air flow suction
Portable on wheels
Ø100mm twin inlets
Quick-action clamps
5 Micron fine filter bag
1.5kW / 2hp 240V motor
- Date Listed:14/04/2023
- Last Edited:28/03/2024
- Condition:New
- Shipping:Pickup Only
Similar Ads
- HM130MAX Portable Sawmill and Trailers - Delivered Australia WideThe HM130MAX is a wide capacity sawmill for sawyers looking to mill popular wide live edge slabs. Featuring a 30” (76cm) diameter log capacity matched with a 30” (76cm) throat opening that produces stunning high-value live edge boards. The HM130MAX Anniversary Edition is loaded with new features like our RapidChange™ blade system, auto lube, an operation hour meter, wider cut capability and much more. A heavy-duty 4 post head design with reinforced back beam support the serious HM130MAX cutting$7,299Yennora, NSW•13h
- Hafco disc sander 15 inchHafco disc sander 15 inch used for 30 minutes then stored away. It's new condition with caster wheels installed for moving around. RRP$2420 at hare and Forbes machinery house. For more info call or text Paul on . Cheers$1,500NegotiableGranville, NSW•1w
- Polishing Buffing Machine Dust Collector Bench Jewelry Polisher LightPolishing Buffing Machine Dust Collector Bench Jewelry Polisher Light Table Top PACKAGE: 1 x Set of Polishing Machine with Dust Collector 1 x Power Adapter with au adapter FEATURES: Polishing machine with dust collector Mini polishing grinding motor Bench grinder polisher Jewelry Polisher Machine A strong suction unit for polishing lathe Manufactured in compliance with health and safety rules required Complete with two spindles SPECIFICATIONS: Voltage: 110V-220V Weight: 12KG Size: 4$329SHIPPING OFFEREDSydney City, NSW•22w
- Hafco Metal master PD-2612 Spindle speeds - 110, 190, 220, 310, 380, 430, 860, 1170, 1260, 1680, 2000, 2880rpm Quiet V-belt drive system Table Tilts Left & Right To 45º Ø31.5mm Drill Capacity with 3MT Spindle Taper 240V Aluminium fan-cooled motor 16mm keyed drill chuck and arbor Chuck key to suit Drill drift tool to remove drill chuck or taper shank drills Table tilts left & right to 45º Hardly used. Works well.$700NegotiableCamden, NSW•17w
- 1.5KW VFD Inverter 220V 1 to 3 Phase Variable Frequency Drive Speed1.5KW VFD Inverter 220V 1 to 3 Phase Variable Frequency Drive Speed Controller Description: This Variable Frequency Drive is made of high quality shell material, heat resistant and flame retardant. Humanized keyboard design, easy to operate. Digital display screen makes it convenient to read clearly. Features: This VFD uses unique control method to realize high torque, high precision and wide speed regulating range driving, with high performance. It has good anti-trip performance and ability t$119SHIPPING OFFEREDSydney City, NSW•80w
- Attendance Machine Recoder Biometric Fingerprint Password For OfficeAttendance Machine Recoder Biometric Fingerprint Password For Office Use Features: Do not need to install any software, easy to operate attendance machine. With 2.4 inch high definition LCD screen, clear and beautiful to look at. Support fingerprint and password authentication mode, quick and sensitive identification. Fingerprint collector adopts high precision reflected optical sensor, more accurate recognition. Can use U disk to download Excel attendance reports, convenient to read the data.$79Sydney City, NSW•78w
- *****4000/6000W Power Inverter DC12V to AC220V Solar Converter Digit*****4000/6000W Power Inverter DC12V to AC220V Solar Converter Digita Features: -Intelligent dual digital display -Pure sine wave inverter has low interference to precision equipment, low noise and strong load adaptability -With over temperature protection, input high and low temperature protection, overload protection, short circuit protection, etc. -High conversion rate, reduced conversion loss, continuous voltage. -Intelligent temperature control silent fan, the fan will automatically$219Sydney City, NSW•105w
- 2500W Peak Car Power Inverter DC 12V to AC 220V USB Modified Sine2500W Peak Car Power Inverter DC 12V to AC 220V USB Modified Sine Wave Convert 100% modified sine wave output, Full power guaranteed. -The wider case, the better for heat dissipation. -Every component is distributed to rationality, greatly improving the reliability and service life of the inverter. -All around protection greatly reduce the possibility of damage. -Modified Sine Wave -DC 12V To AC 220V -Continuous Output Power: 1200W -Peak Output Power: 2500W Application: -Energy syst$109Sydney City, NSW•105w
- 22 New AC/DC Switching Power Adapters, $25 for the whole lot$25 for the whole bucket. New and unused. AC/DC Power Adapters for indoor uses. Output DC12V, 0.5A. Clearance sale. Can be posted at buyer's expense.$25SHIPPING OFFEREDPadstow Heights, NSW•3w
- Solar inverter dc switchSolar beny dc switch isolator switch Many available Check other solar ads Can postNegotiableParramatta, NSW•96w
- Mesasilla - Adjustable Table for childrenMesasilla - Adjustable Table Used – in very good condition. No time wasters please. Only contact if you are genuinely interested. It grows with the little ones while encouraging and promoting good postural habits. The sturdy table is expertly crafted from solid rubber wood with a smooth surface and rounded corners to allow kids to safely move about. The table has a little personal space in the form of a drawer for your child to neatly store their favourite things like markers, crayons and g$190Bullaburra, NSW•6w
- QueenBee PRO CNC Router Machine Full Kit 1500mm x 1500mmQueenBee PRO CNC Router Machine Full Kit – 1500mm x 1500mm. The kit is new and has never been used. I bought it but had no time to assemble it, so I'm selling it. No time-wasters please. Only contact me if you are genuinely interested. The Bulk-Man 3D QueenBee PRO CNC Machine is a linear rail upgrade based off the very popular Work-Bee CNC Machine. The QueenBee Pro Full Kit is a self-assembly kit and comes with everything needed for building your CNC Machine. Other parts that are needed for$1,890Bullaburra, NSW•6w
- Belkin Thunderbolt 3 Dock Pro For Mac & PCBelkin Thunderbolt 3 Dock Pro Hardly used and in very good condition. Key Features of the Belkin Thunderbolt 3 Dock Pro, Compatible macOS & Windows USB-C laptops 1 x USB 3.1 Type-A, 4 x USB 3.0 Type-A 1 x USB 3.1 Type-C, 1 x Thunderbolt 3 1 x Audio In/Out, 1 x GbE RJ45 1 x DisplayPort UHS-II SD Media Card Reader Supports up to 85 W Charging Windows and Mac Compatible$125Bullaburra, NSW•19w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
2 offers have already been made