88 views
ISUZU 2016 FSS (110/210) 4WD Work Truck with Palfinger Crane
$140,000
2016 Model Isuzu FSS 110 - 210 Work truck. No longer needed due to change in work requirements.
Was going to be used for the next 5yrs so work done reflects that. Truck has had-
* Complete new tray built from the ROPS back. 4700mm x 2400mm
Room for full size pallet next to the crane. and can fit two 1000Lt pods between
toolboxes
* New toolboxes as per photos
* All the Rims and Tyres (7) are new, sourced of a 2022 truck. Toyo Hyparadials
There is also 6 new Toyos that go with the truck.
* All the oils and filters changed in the last 5000Klms
* All the suspension has been replaced, new front and rear leaf packs, fronts changed
to conventional for better ride, new bushes. Front Shocks are now high end KONI's
* Crane is a Palfinger 2700. It still has 2 years to go on current cert. Powerpack has
had brushes replaced. The hydraulic controls are new. All new hoses.
* Has a Jedair (OASIS) XD4000 24v Air compressor fitted
* New 300Lt fuel tank
* Extra 200Lt under body water/fuel tank ready to be plumbed to suit your needs
* All auxiliary wiring is new, new isolators for truck main batteries (start and Battery),
new isolator for the crane and the dual battery aux setup. All fully sealed fuse boxes
* Both main batteries are new. the auxiliary batteries are new 260Ah AGM. ($2k)
* Enerdrive DC2DC charger and new solar panels
* Everdrive 2000W inverter
* CELFI
* New uniden 2way and a TAIT mine radio installed
* Dual camera reverse mirror, full time use and switch to tow bar for hooking up trailer
* ISRI air seats fitted to both the driver and passenger sides.
* STEDI light bar and all STEDI work lights
* Pull out work bench at the back of tray
* Complete overhaul of the AC, new Compressor, condensor, evap, hoses, TX valve.
Has had anything that looked dodgy or looked at me side ways replaced. too much work done to write down.
Has just had a Cert of Inspection done. and brake test.
Truck runs smooth and pulls hard, loaded unloaded cant tell the difference, Sits on 100Klms an hour up Mingala range without needing to change down gears. Air seats ride nice and is pretty comfortable as far as big work trucks go.
Dont call and low ball me, not interested in games.
I also have a 9KVA Kubota Lowboy available with only 380hrs on it. That was going to go on the truck.
Was going to be used for the next 5yrs so work done reflects that. Truck has had-
* Complete new tray built from the ROPS back. 4700mm x 2400mm
Room for full size pallet next to the crane. and can fit two 1000Lt pods between
toolboxes
* New toolboxes as per photos
* All the Rims and Tyres (7) are new, sourced of a 2022 truck. Toyo Hyparadials
There is also 6 new Toyos that go with the truck.
* All the oils and filters changed in the last 5000Klms
* All the suspension has been replaced, new front and rear leaf packs, fronts changed
to conventional for better ride, new bushes. Front Shocks are now high end KONI's
* Crane is a Palfinger 2700. It still has 2 years to go on current cert. Powerpack has
had brushes replaced. The hydraulic controls are new. All new hoses.
* Has a Jedair (OASIS) XD4000 24v Air compressor fitted
* New 300Lt fuel tank
* Extra 200Lt under body water/fuel tank ready to be plumbed to suit your needs
* All auxiliary wiring is new, new isolators for truck main batteries (start and Battery),
new isolator for the crane and the dual battery aux setup. All fully sealed fuse boxes
* Both main batteries are new. the auxiliary batteries are new 260Ah AGM. ($2k)
* Enerdrive DC2DC charger and new solar panels
* Everdrive 2000W inverter
* CELFI
* New uniden 2way and a TAIT mine radio installed
* Dual camera reverse mirror, full time use and switch to tow bar for hooking up trailer
* ISRI air seats fitted to both the driver and passenger sides.
* STEDI light bar and all STEDI work lights
* Pull out work bench at the back of tray
* Complete overhaul of the AC, new Compressor, condensor, evap, hoses, TX valve.
Has had anything that looked dodgy or looked at me side ways replaced. too much work done to write down.
Has just had a Cert of Inspection done. and brake test.
Truck runs smooth and pulls hard, loaded unloaded cant tell the difference, Sits on 100Klms an hour up Mingala range without needing to change down gears. Air seats ride nice and is pretty comfortable as far as big work trucks go.
Dont call and low ball me, not interested in games.
I also have a 9KVA Kubota Lowboy available with only 380hrs on it. That was going to go on the truck.
- Date Listed:27/04/2024
- Last Edited:03/05/2024
- GVM (Gross Vehicle Mass):11000
- Make:Isuzu
- Axle Config:4x4
- Fuel Type:Diesel
- Colour:White
- KMs:80322
- Registration Expiry:26/09/2024
- Year:2016
- Air Conditioning:Yes
- Listing Type:Private seller
- Model:110-210 FSS
- Engine Power (HP):210
- Truck Type:Crane Truck
- Registered:Yes
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 1991