51 views
SideSteps NudgeBar StainlessSteel Aluminium2suit Toyota Kluger 2011-13
$639
Nudge Bar
Brand New Aluminium Nudge Bar fit for Kluger (*****2013).
Aftermark Products.
Includes complete kit with all hardware and brackets.
Mounting brackets are E-Coated for rust resistance before powder coating.
High tech manufacturing process ensure the smoothest fit and finish.
Easy bolt-on installation.
Easy to install without any drilling.
Box package, not like other seller using foam and bubble.
Side Steps
Brand New Stainless Steel Side Steps fit for Kluger (*****2013).
Aftermarket Products.
All nerf bars sold in pair for both driver''s side and passenger''s side.
Includes complete kit with all hardware and brackets.
Made of Heavy Duty T-304 Stainless Steel polished.
Mounting brackets are E-Coated for rust resistance before powder coating.
High tech manufacturing process ensure the smoothest fit and finish.
Easy bolt-on installation.
Professional installation is highly recommended.
Brand New Aluminium Nudge Bar fit for Kluger (*****2013).
Aftermark Products.
Includes complete kit with all hardware and brackets.
Mounting brackets are E-Coated for rust resistance before powder coating.
High tech manufacturing process ensure the smoothest fit and finish.
Easy bolt-on installation.
Easy to install without any drilling.
Box package, not like other seller using foam and bubble.
Side Steps
Brand New Stainless Steel Side Steps fit for Kluger (*****2013).
Aftermarket Products.
All nerf bars sold in pair for both driver''s side and passenger''s side.
Includes complete kit with all hardware and brackets.
Made of Heavy Duty T-304 Stainless Steel polished.
Mounting brackets are E-Coated for rust resistance before powder coating.
High tech manufacturing process ensure the smoothest fit and finish.
Easy bolt-on installation.
Professional installation is highly recommended.
- Date Listed:20/10/2022
- Last Edited:20/10/2022
- Condition:New
- Warranty:Yes
- Model:Kluger
- Make:Toyota
Similar Ads
- Monroe ML4414 Single Max-Lift Gas StrutMonroe ML4414 Single Max-Lift Gas Strut - Suits: Ford, Holden, Mazda, Mitsubishi, Nissan, Toyota, VW Positions: Tail lift - Suits FLEXIGLASS CHALLENGE CANOPY Rear Window Part No: ML4414 Specifications: Piston Rod Diameter [mm]: 8 Length from [mm]: 260 Length to [mm]: 430 Strut outside diameter [mm]: 18 Eject Force [N]: 140 Stroke [mm]: 170 If unsure, please forward your rego number(NUMBER PLATE) and we can check for you. Some vehicles, even with the same year, makes and models may require a d$40Bonnyrigg Heights, NSW•4w
- Toyota Hilux 9/2011 - 8/2015 Bonnet Protector - ClearToyota Hilux 9/2011 - 8/2015 Bonnet Protector - Clear Part No: Protective Plastics T370B Posted Picture is Generic - for reference purposes only If unsure, please forward your Rego number (NUMBER PLATE) and we can check for you. Some vehicles, even with the same year, makes and models may require a different part number. Condition: NEW Call or Text: Pickup Location: Bonnyrigg Heights NSW 2177 Credit Card payment via PAYPAL available conditions apply. Cash Price: $80.00, PayPal$80Bonnyrigg Heights, NSW•4w
- Toyota Camry ASV50 2012 - 2022 Front Driver & Passenger WeathershieldsToyota Camry ASV50 2012 - 2022 Front Driver & Passenger Weathershields - Clear Part No: Protective Plastics T360SLD / T360SLP Compatible Vehicles: Toyota Camry 2.5L ASV50 2012 - 2022 Sedan Toyota Aurion 3.5L GSV50R 2011 - 2017 Sedan Condition - NEW Call or Text: Pickup Location: Bonnyrigg Heights NSW 2177 Credit Card payment via PAYPAL available conditions apply. Cash Price: $90.00, PayPal Price: $95.00 Australia Wide Delivery available conditions apply, please contact for detai$90Bonnyrigg Heights, NSW•4w
- Toyota Camry ASV50 2012 - 2021 Driver Slim Tinted WeathershieldToyota Camry ASV50 2012 - 2021 Protective Plastics T360SLDT Driver Slim Tinted Weathershield Part No::T360SLDT Compatible Vehicles; Toyota AurionGSV50R 2011 - 2017 Toyota Camry ASV50 2012 - 2021 Condition: NEW Call or Text: Pickup Location: Bonnyrigg Heights NSW 2177 Credit Card payment via PAYPAL available conditions apply. Cash Price: $50.00, PayPal Price: $53.00 Australia Wide Delivery available conditions apply, please contact for details.$50Bonnyrigg Heights, NSW•4w
- Mercedes W113 - Aluminium moulds mounting kit Pt No:- 000 994 60 81High quality aftermarket replica mounting clip kit for the W113 aluminium moulds (Alu moulds). Replacing your Alu moulds after a respray? Alu moulds hanging loose or not snug with the door or guard? It is most likely that you will need to replace some broken retaining clips. This kit contains the parts highlighted as No 46, 48 & 50 in the attached Parts Diagram Will suit the following MB Vehicles:- • W113 SL (1963 to 1971) Part Nos:- A0009940048, A0029881178 & A0009870915 0009940048, 002988$135Bossley Park, NSW•8w
- Subaru Liberty Tuned By Sti SpoilerGenuine Subaru Tuned By Sti Lip Spoiler Suit GT,2.0,2.5L facelift model MY06-08 Does not fit spec B or H6 model. Please see pictures of silver liberty of bar suits Also been told fits base model outback but please do own checks as cannot confirm Purchased online in pre owned condition with small cracks and marks but have since repaired with aluminium plates and body filler/plastic weld in some sections. Part no .ST9602021040 Has aftermarket STI badge fitted Bargain buy compared to over $6-700$140NegotiableWetherill Park, NSW•3d
- Mercedes Left Tail Light Lens W114- W115 early. Pt 115 826 13 56Have your tail light lenses faded? Perhaps the lens has broken or is starting to fall apart? Time to shout your car a new tail lamp lens. This is a genuine replacement part from Mercedes Benz. Will suit the following vehicles:- • W114 Sedans 01/1968 to 11/1976 • W114 Coupes 1969 - 1976 • W115 Sedans 01/1968 to 01/1977 Part is marked on the attached parts diagram as item no 318 Part No:- • A1158261356 • A1158261356 • A115 826 13 56 • 115 826 13 56 • 115 826 1356 • 115-826-$230Bossley Park, NSW•327w
- Mercedes W107 Front Centre Bumper Rail - 107 885 13 21, 1078851321High quality replica metal support rail for the centre bumper bar rubber. Is your front centre bumper bar rail, damaged or corroded? Perhaps it is missing completely! Time to replace it with this high quality replica bumper bar support rail replacement. These parts are shown as no 23 in the parts diagram attached. Will suit the following MB Vehicles:- • W107 SL (1970 to 1989) • W107 SLC (1972 to 1981) Original Part No’s:- A1078851321 1078851321 107 885 13 21 A107 885 13 21 107 885 1321 107-8$93Bossley Park, NSW•9w
- Mercedes Front Screen Rubber W111 W112 Coupe/Cab - 111 670 56 39Is your front windscreen rubber cracked and falling apart? Does your screen leak when it rains? Time to replace it before your interior is affected or worse still… you begin to develop rust. Replace it with a top quality OEM windscreen mould. This part is manufactured by the same company that supplies to Mercedes Benz. This part is shown as no 13 in the parts diagram attached. Will suit the following MB Vehicles:- Coupe Heckflosse (W111) [1960 to 1971] Cabriolets Heckflo$260Bossley Park, NSW•313w
- Mercedes Rear Trailing arms rubber W108 - W113 Pt 110 352 10 13Does your car make clunking noises or seems to be loose in the rear end? Does your car seem to handle poorly when cornering? It may be due to the rubber mounts on the front of the trailing arms being worn or collapsed. Well don’t worry we have just the part for you. Replace them with a top quality OEM part. This part is shown as no 266 in the parts diagram attached. Will suit the following MB Vehicles:- • S-Class Sedan (W108) [1965 to 1972] • S- Class Sedan (109 [1965 to 1972] •$36Bossley Park, NSW•372w
- Toyota Hilux N80 Rugged Bull bar******2023New JTM Auto Rugged Bull Bars to Suit Toyota Hilux******2023 Want to make Your Ute more aggressive, Then look no further because JTM Autos Rugged Bar has arrived. - Heavy duty Steel - x4 LED Fog lights and x2 LED Blinkers - Winch Compatible - Triple loop Design - All fittings provided, winch Cradle, high-tensile nuts and bolts and 3 front bash plates - Plenty of mounting options for Spotlights, LEDS and Antennas - E-coated for Rust prevention - Black Powder coating Finish - Not ADR approved,$1,299Cabramatta, NSW•2w
- Ford Ranger PX2 PX3 Rugged Bull Bar******2020New JTM Auto Rugged Bull Bars to Suit Ford Ranger******2020 PX2 PX3 Want to make Your Ute more aggressive, Then look no further because JTM Autos Rugged Bar has arrived. - Heavy duty Steel - x4 LED Fog lights and x2 LED Blinkers - Winch Compatible - Triple loop Design - All fittings provided, winch Cradle, high-tensile nuts and bolts and 3 front bash plates - Plenty of mounting options for Spotlights, LEDS and Antennas - E-coated for Rust prevention - Black Powder coating Finish - Not ADR app$1,299Cabramatta, NSW•2w
- Ford Ranger PX1 Rugged Bull Bar******2015New JTM Auto Rugged Bull Bars to Suit Ford Ranger PX1******2015 Want to make Your Ute more aggressive, Then look no further because JTM Autos Rugged Bar has arrived. - Heavy duty Steel - x4 LED Fog lights and x2 LED Blinkers - Winch Compatible - Triple loop Design - All fittings provided, winch Cradle, high-tensile nuts and bolts and 3 front bash plates - Plenty of mounting options for Spotlights, LEDS and Antennas - E-coated for Rust prevention - Black Powder coating Finish - Not ADR approve$1,299Cabramatta, NSW•2w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 1758