128 views
Genuine Honda 5.5kw AVR generator
$200
Surplus to needs.
Block has been honed and a NOS honda piston fitted.
Lapped valves
New exhaust rocker arm, valve seal.
New front crank seal
New airbox, choke setup.
No longer have the time to finish this project. These usually sell for 600-800 dollars in working order.
Unsure if the genset part works as I've never run it with it attached. I received it with a low compression motor and a broken rocker so was never able to test. Priced to sell.
As is where is.
200 obo. Will consider stihl or husqvarna chainsaws as a trade.
Pickup Capalaba or deliver available after cash payment and inspection.
Block has been honed and a NOS honda piston fitted.
Lapped valves
New exhaust rocker arm, valve seal.
New front crank seal
New airbox, choke setup.
No longer have the time to finish this project. These usually sell for 600-800 dollars in working order.
Unsure if the genset part works as I've never run it with it attached. I received it with a low compression motor and a broken rocker so was never able to test. Priced to sell.
As is where is.
200 obo. Will consider stihl or husqvarna chainsaws as a trade.
Pickup Capalaba or deliver available after cash payment and inspection.
- Date Listed:24/04/2024
- Last Edited:30/04/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- DURALLOY 201 MIG WELDER PACKAGE
- Other
DURALLOY 201 MIG WELDER PACKAGE MIG Gas & Gasless Operation ARC STABILITY Waveform control for added stability of the arc, even at low current. DIGITAL DISPLAY Variable amperage control with digital meters for a simultaneous welding current and voltage display. PROTECTION Equipped with temperature, voltage and current sensors for greater protection. FEATURES 2-roll drive feed system with 0.8-0.9 V-roller fitted Generator friendly (10Kva) Industrial cable connectors (35-50) 3m Binzel St$880Lytton, QLD•90w - DURALLOY MULTIMIG 251 COMPACT MIG WELDER PACKAGE
- Other
DURALLOY MULTIMIG 251 COMPACT MIG WELDER PACKAGE Power supply plug 15A PACKAGE INCLUDES Power Source Trolley with tool drawer 3M MB 24 Style MIG Torch 3M Earth Lead 3M MMA Arc Lead 1.5M Gas Hose Argon Regulator Owner’s Manual 0.9-1.2 FC Roller for Gasless Wires PFC TECHNOLOGY Most DURALLOY® Welding Machines feature PFC Technology for maximum electrical efficiency and consistent weld output. MULTIPURPOSE MIG, TIG and MMA modes. ARC STABILITY Waveform control for added stability of th$1,899Lytton, QLD•113w - DURALLOY MULTIWELD 201 ALL-IN-ONE WELDER PACKAGE
- Other
DURALLOY MULTIWELD 201 ALL-IN-ONE WELDER PACKAGE PROCESSES: AC HF PULSE TIG DC HF PULSE TIG SYNERGIC MIG MANUAL MIG MMA STICK FEATURES Synergic MIG Manual MIG Gas & Gas-less MIG functions DC Pulse TIG AC Pulse TIG High Frequency TIG ignition Lift Start Tig Ignition AC Square Wave AC SYN Wave AC Delta Wave 2T/4T trigger control Euro MIG torch connection Quick coupling gas fittings 2 roll wire feeder Burn back adjustment Pre-weld slow wire feed Pre-weld gas adjustment$1,980Lytton, QLD•120w - UNIMIG RAZOR CUT 45 PLASMA CUTTER
- Other
UNIMIG RAZOR CUT 45 PLASMA CUTTER The RAZOR CUT 45 is the perfect plasma cutter for the professional who wants a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is made for the workshop and worksite. The RAZOR CUT 45 boasts some serious cutting power with 16mm clean cut and 20mm severance. Package Includes RAZOR CUT 45 Plasma Cutter 6m SC80 Plasma Torch 4m 300 AMP Earth Clamp Air Regulator Operating Manual MACHINE SPECIFICATIONS PRIMARY INPUT VOLTAGE 240V Sing$1,649Lytton, QLD•33w - CIGWELD CUTSKILL 35 PLASMA CUTTER
- Cigweld
CIGWELD CUTSKILL 35 PLASMA CUTTER Plasma cutting has now been changed forever thanks to the launch of the new range of CutSkill Manual Plasma Cutters, including the CutSkill 35! Incorporating the latest in plasma cutting technology, the CutSkill 35 & 45 Plasma Cutters are easily controlled with a single operating knob. Decide if you want your torch set to manual or latch mode, whether you’re cutting flat plate or grid plate, adjust your current and you’re ready to cut! All actions are clearl$1,198Lytton, QLD•31w - WELDFORCE 200MST MIG / STICK / TIG WELDER PACKAGE
- Other
WELDFORCE 200MST MIG / STICK / TIG WELDER PACKAGE There's a lot more to the Weldforce 200MST MIG welder than what meets the eye. Compact and lightweight (13kg), yet takes both 5kg AND 15kg spools! Other features not always found on other machines in this class are: 200 amps @ 25% MIG output, Stick/MMA & TIG (Lift-Arc) capability, LCD displays, inductance control, large 35-50 cable terminals and spool gun option. Comes with 4m heavy-duty Euro-fit MIG torch, 2-stage gas-saving regulator, 0.8/0$1,199Lytton, QLD•111w - UNIMIG RAZOR TIG 200 AC/DC WELDER
- Other
UNIMIG RAZOR TIG 200 AC/DC WELDER Get incredible results from start to finish with this professional-grade TIG welder. Effortlessly weld any metal with the high-frequency AC/DC TIG The ultimate combination of AC and DC available with Mixed Arc settings Switch your AC welds to suit your needs with the choice of three waveforms A 5-year warranty to reflect our confidence in this machine PACKAGE INCUSIONS RAZOR TIG 200 AC/DC Welder 8m T2 TIG Torch 4m Twist Lock Electrode Holder 4m 300 Amp Earth$1,995Lytton, QLD•46w - BOSSWELD X-SERIES ST 145X VRD MMA AND DC LIFT TIG WELDER
- Other
BOSSWELD X-SERIES ST 145X VRD MMA AND DC LIFT TIG WELDER The Bossweld ST 145X VRD combines the latest IGBT power technology with smooth accurate digital control and the added feature of VRD. It provides the user with the ability to stick weld (MMA) as well as DC TIG weld with lift ARC start. KEY FEATURES VRD (voltage reduction device) 140 Amp output DC MMA and DC TIG welding Fitted 10 Amp plug Digital LED display DC TIG lift arc start Excellent arc stability Lightweight and portable 35/50 Di$245Lytton, QLD•71w - WELDFORCE 180MST MIG / STICK / TIG WELDER PACKAGE
- Other
WELDFORCE 180MST MIG / STICK / TIG WELDER PACKAGE At just 9kg, the Weldforce 180MST is one of the most compact and lightweight "10 amp" multi-function MIG welders on the market. If you're looking for portability and maximum power from 10 amp supply, this is your machine! 180 amps MIG output, Stick/MMA & lift-TIG capability & LCD displays are some of the unique features not normally found on other machines in this class. Comes with 3m heavy-duty Euro-fit MIG torch, 2-stage gas-saving regulato$749Lytton, QLD•111w - BOSSWELD X-SERIES 141X STICK WELDER
- Other
BOSSWELD X-SERIES 141X STICK WELDER The Bossweld ST 141X combines the latest IGBT power technology with smooth accurate digital control. It provides the user with the ability to stick weld (MMA) as well as DC TIG weld with lift ARC start. KEY FEATURES 140 Amp output DC MMA and DC TIG welding Fitted 10 Amp plug Digital LED display DC TIG lift arc start Excellent arc stability Lightweight and portable 35/50 Dinse output connectors Stepless amperage control Generator safe IGBT i$220Lytton, QLD•119w
More from this seller
You don't have any recently viewed items
Any items you have viewed recently will be displayed here