969 views
TRACTOR = MASSEY FERGUSON 3090 4WD BLADE/STICK RAKE - FUNCTIONAL ORDER
$27,500
TRACTOR DOES NOT COME WITH VERGE MOWER IN PHOTOS.
Comes with operator manual, some spares. Motor starts readily and does not blow excessive smoke, no oil use. Three sets of rear remotes. Hydraulics all operate as they should. Not spruced up for sale. Photos are of tractor as used.
Fine cracking in central rear LHS wheel hub. ( Wheel hub is recommended to be welded. RHS already done.)
Massey Ferguson 3090 I have owned for the last 20 or so years. I acquired ex a contractor/retailer who did about 10500 or so hrs and it now has 11,700 approximately. At that time a new clutch was put in with machined pressure plate and flywheel, new alternator, new brake discs, new synchros in the gearbox, starter motor refurbished. re housed front diff bearing surfaces, etc. In my ownership it has been serviced regularly by me. Transmission is always overfilled as I am on a slope. Main injector pump was also resealed after low sulphur diesel in the early 2000's. Has been good since. New Air conditioning compressor and evaporator were also installed. Other smaller servicing has taken place as necessary including IP Dampener.
New tie rod ends, new bearings in steering hubs early in ownership.
The main rear lift cylinders were re-sealed.
I have purchased another later model MF.
TLC = The speed sensor on the PTO was disconnected. PTO WORKS FINE. Speed shift light is intermittent as are some others. Probably an easy find for someone competent, ie globe or dirty terminals. Clutch master cylinder new import from Europe. Has longer stroke now levering the throw of the pressure plate further causing some sticking it appears. I sprayed the main shaft in front of slave cylinder with lithium grease and after use this appears to have solved the sticky issue.
Air conditioning fan in roof was sticky recently. I got it going with a clean and lubrication. No issues. Inquiries revealed new fan assembly cost sub $200.
Purchase subject to direct inspection. Sold as is.
Thanks for looking at my ad.
Price includes GST and invoice with ABN.
I will answer any question honestly. I cannot tell you what I do not know.
Lovely tractor to drive, great turning circle, blade is on full length chassis frame and very strong. Gearbox selects readily in all gears and ranges. Motor starts readily with no issues. Reportedly the head was re-conditioned previous to my ownership.
Comes with operator manual, some spares. Motor starts readily and does not blow excessive smoke, no oil use. Three sets of rear remotes. Hydraulics all operate as they should. Not spruced up for sale. Photos are of tractor as used.
Fine cracking in central rear LHS wheel hub. ( Wheel hub is recommended to be welded. RHS already done.)
Massey Ferguson 3090 I have owned for the last 20 or so years. I acquired ex a contractor/retailer who did about 10500 or so hrs and it now has 11,700 approximately. At that time a new clutch was put in with machined pressure plate and flywheel, new alternator, new brake discs, new synchros in the gearbox, starter motor refurbished. re housed front diff bearing surfaces, etc. In my ownership it has been serviced regularly by me. Transmission is always overfilled as I am on a slope. Main injector pump was also resealed after low sulphur diesel in the early 2000's. Has been good since. New Air conditioning compressor and evaporator were also installed. Other smaller servicing has taken place as necessary including IP Dampener.
New tie rod ends, new bearings in steering hubs early in ownership.
The main rear lift cylinders were re-sealed.
I have purchased another later model MF.
TLC = The speed sensor on the PTO was disconnected. PTO WORKS FINE. Speed shift light is intermittent as are some others. Probably an easy find for someone competent, ie globe or dirty terminals. Clutch master cylinder new import from Europe. Has longer stroke now levering the throw of the pressure plate further causing some sticking it appears. I sprayed the main shaft in front of slave cylinder with lithium grease and after use this appears to have solved the sticky issue.
Air conditioning fan in roof was sticky recently. I got it going with a clean and lubrication. No issues. Inquiries revealed new fan assembly cost sub $200.
Purchase subject to direct inspection. Sold as is.
Thanks for looking at my ad.
Price includes GST and invoice with ABN.
I will answer any question honestly. I cannot tell you what I do not know.
Lovely tractor to drive, great turning circle, blade is on full length chassis frame and very strong. Gearbox selects readily in all gears and ranges. Motor starts readily with no issues. Reportedly the head was re-conditioned previous to my ownership.
- Date Listed:13/02/2024
- Last Edited:21/04/2024
- Hours:11700
- Listing Type:Private seller
- Model:3090
- Make:Massey Ferguson
- SAMSUNG COLOUR LASER PRINTER XPRESS C460FWSAMSUNG COLOUR LASER PRINTER. Requires paper pick up repaired. Working fine but then decided not to pick up paper. Apparently on U Tube advices are that it is a small synthetic rest pad requires replacement and it takes a couple of hours. Value is in the 1000 page colour toners and the 1500 page Black Toner that are new in addition to the near new toners already installed. Easy fix for someone with skill and knowledge or patience apparently. Sold as is no warranty. We bought another colourNegotiableCoffs Harbour, NSW•9w
- STAR WARS R2D2 AND REY FIGURINES = PLASTIC ABOUT 30CM TALLCOST ABOUT $35 EACH. BOTH FOR $35.$35Coffs Harbour, NSW•9w
- AIR CONDITIONER - FREE - NEEDS REPAIRUsed over a number of years. Started making noises and pumps hot after cold???? AC specialist might be able to use as spares or get working. Comes with vent for window and fittings.FreeCoffs Harbour, NSW•12w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 7879