421 views
HOIST 4 Post Hoist 4 Ton extra long & high Part No.: S4PH4TONXXL C 2
$4,449
SHIPPING OFFERED
STRUTFIT PTY LTD - Tel. No.: 03 - *****8322
Address : 4/6 Fowler Road, Dandenong South, Vic 3175
HOIST – 4 Post Hoist – 4 Ton extra long & high Part No.: S4PH4TONXXL Code No. 3
Code No.: 3
Part No.: S4PH4TONXXL
Shipping weight & size : 930 Kgs & 526*71*56 cm
Description :
INSTALLATION IS ALSO AVAILABLE AT AN ADDITIONAL COST.
This extra long and high 4 Post Hoist is ideal for working on large vehicles and increasing the parking space in your shed. It is significantly larger than our 4 Ton Standard 4 Post Hoist whilst maintaining the same width.
4 Post Hoist Features
• 4000kg/ 4 ton safe load limit
• Lifting height of 2.2m
• A single hydraulic cylinder lifts the runways by pulling the cables
• Runways can be adjusted between two track settings by removing 4 bolts and sliding one over
• Keep your car off the ground away from being dented, scratched and touched
• Durable powder coated finish
Safety Features
• 4 point pneumatic safety lock releases
• Additional secondary safety lock when weight comes off the cables
• Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
• Heavy duty 6mm thick cross beams and 5mm thick runways
• 10mm steel wire rope equalising cables
• Anti-surge valve in the hydraulic power unit
What’s Included?
• 4 post hoist with all bolts, cables, lines and fixings
• 240V single phase hydraulic power unit
• Concrete anchor bolts
• Detailed installation instructions
What’s Not Included?
• Hydraulic oil
• Setup of power units electrical connection
• Compressed air supply
Optional Accessories
• A rolling Secondary Lift is the easiest way to jack up cars on the hoist
• An Optional Jacking Plate can be used as an extra support point under the vehicle
• Caster Wheels allow you to move the 4 Post Hoist around your workshop with ease
• Need to do wheel alignments? We offer a Wheel Alignment Kit as an add-on
• Storing cars above and below? Be sure to use our Oil Drip Trays to keep them safe
Shed Requirements
• 150mm deep concrete at 32mpa
• Minimum ceiling height of 3.9m
Warranty & Certifications
• 3 year Australian warranty* includes structure, hydraulics & electrics
• Australian WorkSafe registered design
• CE certification
•
MOTOR SPECS 240V 20A SINGLE PHASE
CLEARANCE BETWEEN POSTS 2715MM
MAX TABLE HEIGHT 2265MM
POST HEIGHT 2600MM
OVERALL WIDTH INCLUDING PUMP 3300MM
OVERALL LENGTH NOT INCLUDING RAMPS WHEN DOWN 5310MM
OVERALL LENGTH INCLUDING RAMPS WHEN DOWN 6070MM
TABLE LENGTH 4960MM
EACH TABLE WIDTH 480MM
N.W/ G.W 910KGS/ 930KGS
MINIMUM CONCRETE THICKNESS 150MM
• Material Thickness
CABLES 10MM
CROSS BEAMS 6MM
RUNWAYS 5MM
COLUMNS 4MM
• Freight Information
HOIST 526CM 71CM 56CM
TOTAL WEIGHT 930KG
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
· Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all r
Address : 4/6 Fowler Road, Dandenong South, Vic 3175
HOIST – 4 Post Hoist – 4 Ton extra long & high Part No.: S4PH4TONXXL Code No. 3
Code No.: 3
Part No.: S4PH4TONXXL
Shipping weight & size : 930 Kgs & 526*71*56 cm
Description :
INSTALLATION IS ALSO AVAILABLE AT AN ADDITIONAL COST.
This extra long and high 4 Post Hoist is ideal for working on large vehicles and increasing the parking space in your shed. It is significantly larger than our 4 Ton Standard 4 Post Hoist whilst maintaining the same width.
4 Post Hoist Features
• 4000kg/ 4 ton safe load limit
• Lifting height of 2.2m
• A single hydraulic cylinder lifts the runways by pulling the cables
• Runways can be adjusted between two track settings by removing 4 bolts and sliding one over
• Keep your car off the ground away from being dented, scratched and touched
• Durable powder coated finish
Safety Features
• 4 point pneumatic safety lock releases
• Additional secondary safety lock when weight comes off the cables
• Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
• Heavy duty 6mm thick cross beams and 5mm thick runways
• 10mm steel wire rope equalising cables
• Anti-surge valve in the hydraulic power unit
What’s Included?
• 4 post hoist with all bolts, cables, lines and fixings
• 240V single phase hydraulic power unit
• Concrete anchor bolts
• Detailed installation instructions
What’s Not Included?
• Hydraulic oil
• Setup of power units electrical connection
• Compressed air supply
Optional Accessories
• A rolling Secondary Lift is the easiest way to jack up cars on the hoist
• An Optional Jacking Plate can be used as an extra support point under the vehicle
• Caster Wheels allow you to move the 4 Post Hoist around your workshop with ease
• Need to do wheel alignments? We offer a Wheel Alignment Kit as an add-on
• Storing cars above and below? Be sure to use our Oil Drip Trays to keep them safe
Shed Requirements
• 150mm deep concrete at 32mpa
• Minimum ceiling height of 3.9m
Warranty & Certifications
• 3 year Australian warranty* includes structure, hydraulics & electrics
• Australian WorkSafe registered design
• CE certification
•
MOTOR SPECS 240V 20A SINGLE PHASE
CLEARANCE BETWEEN POSTS 2715MM
MAX TABLE HEIGHT 2265MM
POST HEIGHT 2600MM
OVERALL WIDTH INCLUDING PUMP 3300MM
OVERALL LENGTH NOT INCLUDING RAMPS WHEN DOWN 5310MM
OVERALL LENGTH INCLUDING RAMPS WHEN DOWN 6070MM
TABLE LENGTH 4960MM
EACH TABLE WIDTH 480MM
N.W/ G.W 910KGS/ 930KGS
MINIMUM CONCRETE THICKNESS 150MM
• Material Thickness
CABLES 10MM
CROSS BEAMS 6MM
RUNWAYS 5MM
COLUMNS 4MM
• Freight Information
HOIST 526CM 71CM 56CM
TOTAL WEIGHT 930KG
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
· Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all r
- Date Listed:16/12/2022
- Last Edited:04/04/2024
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- Welded Steel Livestock Mesh - 6x6x0.57mm - 1200mm X 30M RollWELDED GALVANIZED STEEL MESH 6X6X0.57MM – 1200MM X 30M ROLL The OzSupply galvanized wire mesh roll is an all-purpose netting ideal for farm fencing, garden plant protection, and animal enclosure. Manufactured from 0.57mm galvanised wire to endure all the punches, kicks, and rough treatment that farm animals, the weather, and industrial use can throw at them. Galvanized steel mesh rolls are some of the best fencing products available for Australia’s tough condition. Hot dip galvanised fini$188Dandenong South, VIC•107w
- MARBLE LOOK POLISHED PORCELAIN TILE ( SRI60396PMQ) 600x600 $ 19.90 SQMTILE : PORCELAIN MODEL NUM : SRI60396PMQ SIZE : 600X600 JOB PRICE : $ 19.90 PER SQM WHY SRI IMPORTS ? High standards of QUALITY Excellent sales SERVICES Competitive PRICE Timely delivery Variety of choices Unbelievable laying charge Welcome to Sri Imports Real marble tiles are truly magnificent to look at, they are beautiful and always unique. You will never find two marble surfaces that look exactly the same. Marble gives the sense of grandeur wherever it is laid and is$19.90Dandenong South, VIC•241w
- WELDED STEEL LIVESTOCK MESH - 50X50X1MM - 900MM X 20M ROLLWELDED STEEL MESH 50X50X1MM HOLES 900MMH X 20M ROLL The OzSupply hot dip welded steel mesh roll is an all-purpose netting ideal for farm fencing, garden plant protection, and animal enclosure. The galvanized wire fencing is also suitable for most concreting applications. Ideal for pathway applications the galvanised wire mesh provides a long lasting finish for any purpose. Manufactured from heavy duty 1mm galvanised wire to endure all the punches, kicks, and rough treatment that farm ani$57Dandenong South, VIC•201w
- Power Inlet 10AMP and 15AMP- 250V 1PH IP66/ 3 Flat Pin Industrial10AMP and 15AMP 250V 1ph IP66 Power Inlet 3 Flat Pin Industrial At OzSupply Australia we stock the 10AMP and 15AMP Heavy Duty Power Inlets in which are highly useful for a wide variety of purposes and they are also weatherproof for rain, hain or shine weather, and are padlockable for security use, and have surface mounts for easy use. Features: IP66 Rated for Heavy Duty or Marine Applications Weatherproof Snap Catch Latch with Clear Cover Insulated Pins Full Australian Approvals Su$60Dandenong South, VIC•201w
- 50x50mm 2mm wall 6m long Galvanised Steel Posts OR cut to sizeCALL: ********9776 PICK UP: 19 METCALF DRIVE, DANDENONG SOUTH SHS STEEL - GALVANISED STEEL PIPE 50 X 50 X 2MM. SPECIFICATIONS: Material: galvanised steel Size (mm): 50x50 Thickness (mm): 2 Length: 6m OPTIONAL SERVICES FOR EXTRA CHARGE: $3 per cut __________________________________________________________ At OzSupply Australia we are proud to have on our online store the 50x50mm Galvanised Steel Tube. Our 50x50mm Galvanised Steel can be used for a ranch of different projects a$69Dandenong South, VIC•201w
- Soundless Acoustic Vinyl planks 5mm $55.90 Long BoardSoundless Acoustic Vinyl planks 5mm $55.90 psqm Long Board Features & benefits: Antibacterial Virgin Material Designed for No Extra Underlay Best Choice for Allergy Sufferers No expansion gap required Fire, Slip, Oil and Stain Resistant Durable & Low Maintenance Specifications: 1524 x 228 x 5mm 0.5mm wear layer 15 years Commercial Wear Warranty 30 years Residential Wear Warranty 2.0848sqm per box (6 planks) Fibreglass layer R10 slip rating Berkshire Trading, Factory2, 76-$55.90Dandenong South, VIC•123w
- 65mm x 6m Aluminium Coving for Coolrooms/Freezer Commercial Purpose65 MM MILL FINISH ALUMINIUM COVING 6M LONG At OzSupply Australia we stock the 65mm Aluminium Coving. These coving can be ideal for Coolrooms, Freezers and Fridges and or commercial kitchens or anywhere that would like a nice finishing touch to it. FEATURES: Ideal for Coolrooms, Freezer, Fridge, Commercial Kitchen SPECIFICATIONS: Length: 6 m Width: 65 mm Material: Mill Finish Aluminium EXTRA: $3.00 per custom cut __________________________________________________________$33.50Dandenong South, VIC•201w
- 12mm AC4 HDF LAMINATE - NATURAL OAK (1215x196x12) FROM $ 19.90WHOLESALE PRICE DIRECT TO CUSTOMER 12MM AC4 HDF LAMINATE FLOORING COLOUR NAME : NATURAL OAK SIZE : 1215 X 196 X 12 SQM : 1.90512 PER BOX HIGH GLOSS WITH WAX BOX : 8PCS IN A BOX Pallet Price: $ 19.90 PER SQM ( OVER 100 SQM ) JOB PRICE $ 19.90 PSQM COLOUR OPTION : CHAMPAGE OAK, CHESTNUT OAK, HERITAGE GREY, SOHO GREY, BEAVER, ANTIQUE OAK, MERCURY, ASH GREY, CHARCOAL OAK, FRENCH GREY, MINK GREY, TAWNY OAK, NATURAL OAK Laminate flooring L$19.90Dandenong South, VIC•58w
- FREE-STANDING ACRYLIC BATHTUB (LB 1089W )***WHOLESALE PRICE DIRECT TO CUSTOMER*** ACRYLIC FREE STANDING BATHTUB MODEL NO : LB1089W COLOR : WHITE & BLACK SIZE : 1700x710x840 CLEARANCE PRICE $ 825.00 WE HAVE VARIOUS SIZE AND MODELS AVAILABLE, PLEASE VISIT OUR SHOWROOM We are importers of wide range of flooring products. Our products include marble tiles, polished porcelain tiles, timber look porcelain tiles, granite tiles, ceramic tiles, engineered hardwood flooring, strand woven bamboo flooring, vinyl flooring, laminate$825Dandenong South, VIC•389w
- FREE-STANDING ACRYLIC BATHTUB (LB 1085W )***WHOLESALE PRICE DIRECT TO CUSTOMER*** ACRYLIC FREE STANDING BATHTUB MODEL NO : LB1085W COLOR : WHITE SIZE : 1700x770x680 CLEARANCE PRICE $ 790 WE HAVE VARIOUS SIZE AND MODELS AVAILABLE, PLEASE VISIT OUR SHOWROOM Price valid until stock available We are importers of wide range of flooring products. Our products include marble tiles, polished porcelain tiles, timber look porcelain tiles, granite tiles, ceramic tiles, engineered hardwood flooring, strand woven bamboo$790Dandenong South, VIC•389w
- METEX G/Head Pedestal Drill Mill Machine W Coolant & Tap Part SDMF40METEX Geared Head Pedestal Drilling Milling Machine with Coolant & Tapping Part No.: SDMF40 Code No. 4 Code No.: 4 Part No.: SDMF40 Shipping weight & size : 370 kgs & 73*100*192 cm Description: The METEX Geared Head Pedestal Drilling Milling Machine is Industrial Heavy Duty designed and precision manufactured. The large diameter column and heavy metal construction ensures long life and perfect operation for years to come. Features micro feed Tapping mode and easy speed change. Head and T$5,550SHIPPING OFFEREDDandenong South, VIC•10h
- 16mm BENCH DRILL OPTIMUM Quality Free Keyless Chuck Part No.: SDQ16 C4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 BENCH DRILL PRESS Precision 16mm OPTIMUM Quality FREE Keyless Chuck Part No.: SDQ16 Code No. 4 Code No.: 4 Part No.: SDQ16 Shipping weight & size : 130 kgs & 145*65*45 cm Description: The OPTIMUM Precision Bench Drill Press is a highly accurate and reliable machine. The table is able to be rotated to make it capable of drilling a large range of angles. Another Quality OPTIMUM product!$750SHIPPING OFFEREDDandenong South, VIC•13h
- 30mm PEDESTAL DRILL PRESS 1100w 9 speed Part No.: SDQ30 Code 4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : 30mm PEDESTAL DRILL PRESS OPTIMUM Quality Accuracy 1100w 9 Speed Wood Metal Part No.: SDQ30 Code No. 4 Code No.: 4 Part No.: SDQ30 Shipping weight & size : 130 kgs & 145*65*45 cm Description: The OPTIMUM SDQ32 Pedestal Drill Press is an extremely accurate and reliable Industrial machine for metal or wood work. The table is a$2,050SHIPPING OFFEREDDandenong South, VIC•14h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8322