95 views
TRAILER JACK STAND ROUND with wheel Part No.: STJSRW Code No. 29
$199
STRUTFIT PTY LTD - Tel. No.: 03 - *****8322
Address : 4/6 Fowler Road, Dandenong South, Vic 3175
TRAILER JACK STAND ROUND with wheel Part No.: STJSRW Code No. 29
Code No.: 29
Part No.: STJSRW
Shipping weight & size :
Description:
DEPENDABLE STRENGTH - This trailer jack is rated to support up to 5,000 pounds trailer tongue weight
SWIVEL DESIGN - To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place
EASY OPERATION - This trailer tongue jack allows vertical movement and operates using a side-wind handle
CORROSION-RESISTANT - For long-lasting corrosion resistance against water, dirt, road salt and more
Convenient Mobility for easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use
The Round Jack Stand with Wheel has interchangeable foot with dual thermoplastic wheels and zinc plated bracket for increased surface area for smooth, steady travel. It is more stable, with less sinking thus can run through mud or over gravel and sharp rocks.
Both the dual trailer swirl jack caster wheels and the jack footplate features safety pins that allow for a quick and secure attachment. It’s a simple feature, but it will save you lots of headaches later on.
The side-wind handle is easy to grip and doesn't take a whole lot of effort to operate the jack, which lets you raise the entire trailer up and down easily - minimal cranking for quick adjustment.
It is equipped with swivel bracket and ensures plenty of clearance while towing your trailer. The jack swings up and out of the way for towing and features a heavy-duty pull grip to securely lock into place.
This product is easy for travel and storage. Great for everyday camper, marine trailers, fisherman or boating enthusiast.
SPECIFICATIONS
Material: Steel
Capacity: 5000 lbs
Wheel Diameter: 6 inches
Heavy Duty round Jack giving 5000LBS rating & up to 245mm extension
Measurement from bottom to middle of draw bar bracket (when closed) is around 272mm
Heavy Duty Swivel clamp plate with eight predrilled holes point suitable for drawbars up to 100mm
Sidewinder handle side mounted
IN THE BOX
1 - Round Jack
1 - Swivel clamp plate
1 - Spring loaded locking handle
1 - Dual 6" dolly wheel
Mounting bolts included
N.B. Colour may vary
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
· Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all return instructions provided to you via phone or your registered email address. All returns must be directed through Customer Service. If you do without instructions, there is a risk that your returned item may not be iden
Address : 4/6 Fowler Road, Dandenong South, Vic 3175
TRAILER JACK STAND ROUND with wheel Part No.: STJSRW Code No. 29
Code No.: 29
Part No.: STJSRW
Shipping weight & size :
Description:
DEPENDABLE STRENGTH - This trailer jack is rated to support up to 5,000 pounds trailer tongue weight
SWIVEL DESIGN - To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place
EASY OPERATION - This trailer tongue jack allows vertical movement and operates using a side-wind handle
CORROSION-RESISTANT - For long-lasting corrosion resistance against water, dirt, road salt and more
Convenient Mobility for easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use
The Round Jack Stand with Wheel has interchangeable foot with dual thermoplastic wheels and zinc plated bracket for increased surface area for smooth, steady travel. It is more stable, with less sinking thus can run through mud or over gravel and sharp rocks.
Both the dual trailer swirl jack caster wheels and the jack footplate features safety pins that allow for a quick and secure attachment. It’s a simple feature, but it will save you lots of headaches later on.
The side-wind handle is easy to grip and doesn't take a whole lot of effort to operate the jack, which lets you raise the entire trailer up and down easily - minimal cranking for quick adjustment.
It is equipped with swivel bracket and ensures plenty of clearance while towing your trailer. The jack swings up and out of the way for towing and features a heavy-duty pull grip to securely lock into place.
This product is easy for travel and storage. Great for everyday camper, marine trailers, fisherman or boating enthusiast.
SPECIFICATIONS
Material: Steel
Capacity: 5000 lbs
Wheel Diameter: 6 inches
Heavy Duty round Jack giving 5000LBS rating & up to 245mm extension
Measurement from bottom to middle of draw bar bracket (when closed) is around 272mm
Heavy Duty Swivel clamp plate with eight predrilled holes point suitable for drawbars up to 100mm
Sidewinder handle side mounted
IN THE BOX
1 - Round Jack
1 - Swivel clamp plate
1 - Spring loaded locking handle
1 - Dual 6" dolly wheel
Mounting bolts included
N.B. Colour may vary
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
· Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all return instructions provided to you via phone or your registered email address. All returns must be directed through Customer Service. If you do without instructions, there is a risk that your returned item may not be iden
- Date Listed:18/07/2023
- Last Edited:18/07/2023
- Condition:New
Similar Ads
- Fancy Round Compact Fluorescent Globe 9W ES Warm WhiteProduct Name: Fancy Round Compact Fluorescent Globe 9W ES Warm White Product Code: T2RMIR08ES2709 Product Price $8.00 Incl GST New Item Limited Stock Features - Up to 80% power saving - 8000 hours average rated lamp life hours - Integral ballast and starter - Soft start - Protected from electrical surge - Warm White ( 2700K) - 9 watts - Dimensions 97mm (h) x 50mm (w) - ES Base Applications - Direct retrofit for incandescent fancy round lamps - For domestic and commercial$8Noble Park North, VIC•87w
- 10W 6V G4 Osram Tungsten Halogen Lamp (w/out reflector) (Sold as 10)Product Name: 10W 6V G4 Osram Tungsten Halogen Lamp (without reflector) (Sold as 10) Product Code: 4050300006758 Product Price $100.00 Incl GST New Item * Please note image is for illustrative purposes only and will vary depending on the specific model selected. Remember, if you can't find what you are looking for or you just aren't sure, please don't hesitate to contact us. Model No : 4050300006758 Description : 64225 M/29 10W 6V G4 ESA ANSI : E SA FHD Replaces : M/28 Watts : 10 Vol$100Noble Park North, VIC•87w
- Unirack European Pallet Jack - 24 Month Warranty -Capacity 2500KGSuper High quality Unirack pallet jack available as a European model (W550mm) or Standard (W685mm). Low profile & Super long also available. Fully cast hydraulic housing, dual front and rear wheels & pallet entry rollers. We now offer these units with a 24 month return to base repair/repalcement warranty & unlike most of our competitors we carry a full range of spare parts so if issues arise outside of warranty bring it back to us and we can help. Lots of suppliers will tell you its a throw$499Dandenong South, VIC•409w
- Unirack Standard Pallet (Euro Avail) Jack 685mm 24 Month WarrantyHigh quality Unirack pallet jack supplied with 24 month return to base rapair/replacement warranty, Spare parts available if issues arise outside of warranty. Our pallet jacks are super robust - we have scoured the world to find the best jacks and heaped on the quality features to make them last. Big 2500kg capacity - tested to CE, TUV and GS European Standards. Double Polyurethane wheels - not nylon. Durable and makes for a comfy ride. Fully cast hydraulics mean it is much less likely to$499Dandenong South, VIC•379w
- Unirack Euro Pallet Jack- 2500KG Capacity- Same Day DeliveryUnirack 2500KG Standard or Euro Pallet Jacks are always in stock, pre-assembled & ready for work. Super high quality, we provide a 12 month, return to base repair/replacement warranty & unlike MANY suppliers we carry a full range of spare parts so if you have issues outside of the warranty period just bring it back and we can help, other suppliers will tell you its a throw away item and to purchase a new one - Useless. Specifications: Capacity: 2500KG Fork Outside Distance 550mm (St$499Dandenong South, VIC•426w
- Unirack Standard Pallet Jack - 2500KG - 24 Month WarrantyHigh quality Unirack pallet jack available as a standard model (W685mm) or European (W550mm). Low profile & Super long also available. Fully cast hydraulic housing, dual front and rear wheels & pallet entry rollers. We now offer these units with a 24 month return to base repair/repalcement warranty & unlike most of our competitors we carry a full range of spare parts so if issues arise outside of warranty bring it back to us and we can help. Lots of suppliers will tell you its a throw away$499Dandenong South, VIC•409w
- Pallet Jacks - Super Low Pallet Jack 1500kgUnirack Super Low Pallet Jack with a capacity of 1500kg. Key Features: Fork Length: 1220mm Max Lift Height: 140mm Load Capacity: 1500kg Unlike many suppliers we carry a full range of spare parts so if you have issues outside of your 24 months warranty period just bring it back to us & we can help. • Our pallet jacks are super robust ñ we have scoured the world to find the best jacks and heaped on the quality features to make them last. • Big 2500kg capacity ñ tested to CE, TUV and$849Dandenong South, VIC•298w
- Unirack Standard Pallet Jack- Capacity 2500KG- Same Day DeliveryUnirack Pallet Jacks are always in stock, pre-assembled & ready for work. Super high quality, we provide a 12 month, return to base repair/replacement warranty & unlike MANY suppliers we carry a full range of spare parts so if you have issues outside of the warranty period just bring it back and we can help, other suppliers will tell you its a throw away item and to purchase a new one - Useless. Specifications: Capacity: 2500KG Fork Outside Distance 685mm (Euro W550mm available - Same$499Dandenong South, VIC•426w
- Stainless Steel Pallet Jack - Capacity 2000KGStainless Steel pallet jack for wet areas. Stainless steel gives durable corrosion protection that stands up to the constant abrasion of pallet entry and exit. Capacity 2000KG Fork Height Range 75-190mm Fork width 685mm Fork Length 1150mm 12 month return to base warranty. CONTACT US ***************************************************************** PHONE: (03) *****9464 SHOWROOM: 22 Commercial Drive, Dandenong South EMAIL: ABOUT US *****************$4,989Dandenong South, VIC•448w
- Galvanised Pallet JackQuality Unirack galvanised Pallet Trolley. Galvanising process gives durable corrosion protection that stands up to the constant abrasion of pallet entry and exit & is suited for wet areas. Capacity 2000kg Fork Outside 685mm Fork Inside 360mm Fork length 1210mm Max Lift Height 185mm Lowered lift height 75mm Weight 85kg Bearings - Stainless CONTACT US ***************************************************************** PHONE: (03) *****9464 SHOWROOM: 22 Commercial Drive, Dand$1,529Dandenong South, VIC•301w
- T-SLOT Toggle Clamps M12 Hold Down Forged U Jigs Mills Part .: SM12 C4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : T-SLOT Toggle Clamps M12 Hold Down Forged U Jigs Mills Part No.: SM12 Code No. 4 Code No.: 4 Part No.: SM12 Shipping weight & size : 3 kgs & 17*10*5 cm Description: Hold Down Clamps slide effortlessly into T-slots. The lock nuts easily tighten and provides adequate pressure to stabilize your project, while the brass shims prot$135SHIPPING OFFEREDDandenong South, VIC•10h
- STAND UNIVERSAL Machine Workshop Grinder Polisher Part No.: SSTDBGF C4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : STAND UNIVERSAL Machine Workshop Grinder Polisher Part No.: SSTDBGF Code No. 4 Code No.: 4 Part No.: SSTDBGF Shipping weight & size : 15 kgs & 80*45*35 cm Description: Stand for Bench Grinders, Polishers and Sanders. Turn your METEX bench grinder/polisher or sander into a standalone workstation. Another Quality METEX produc$299SHIPPING OFFEREDDandenong South, VIC•11h
- M20X185mm L Feet Vibrat Absorb Mach Mount Stand Foot Pad Part SSE3 c4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : M20X185mm Levelling Feet Vibration Absorbing Machine Mount Stand Foot Pad Part No.: SSE3 Code No. 4 Code No.: 4 Part No.: SSE3 Shipping weight & size : 2 kgs & 15*5*15 cm Description: These mounting Leveling Feet are for the ultimate in heavy machine stabilization. And feature easy setting, fast leveling, and vibration and noi$199SHIPPING OFFEREDDandenong South, VIC•11h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8322