61 views
Hervey Bay Real Timber Hardwood Decking Shiplap and Panel
$2.57
SHIPPING OFFERED
Hardwood Decking SPECIALS
Forest Reds Feature Grade (2nd Grade)
72x22 $2.79, 80x20 $3.60, 82x22 $3.78, 90x20 $4.56, 94x22 $5.16, 118x20 $6.53,
122x22 $6.97, 140x20 $8.73, 144x22 $9.47
Blackbutt Feature Grade (2nd Grade)
70x20 $3.04, 72x22, $3.31, 80x20 $4.11, 82x22 $4.27, 90x20 $5.45, 94x22 $6.18,
113x19 $7.31, 118x20 $7.81, 122x22 $8.33, 135x19 $9.60, 140x20 $10.45,
144x22 $11.33, 158x24, $13.78, 163x27 $15.70
Mixed Hardwood Utility Grade (3rd Grade)
070x20 $1.61, 080x20-$2.30, 090x20 $2.74, 113x19$3.66, 135x19 $4.38
Decking isn’t a sideline for us. We’re a dedicated Hardwood Sawmill set up and specifically programmed to produce Hardwood Decking, Shiplap and Wall Panel. The time capsules that we harvest grows locally and within sight of our sawmill. You can still buy the same solid hardwood that we used to build our infrastructure many years ago.
A structure built from heavier locally grown hardwood is likely to last longer and be more durable than one built from glued waste pine sawdust and plastic.
Which brings me to composite decking. Most composite decking is basically 50% wood fibre and 50% plastic. It’s all good to say that the “glue” is weatherproof and will last forever but the timber fibre used was probably cheap waste pine fibre in the first place. Composite deck may not wear as well as natural hardwood in that it may not be as hard as natural hardwood. Some of the more expensive composite decking products are fully sealed with thin layer of plastic. They did this to stop the moisture from entering the composite board and deep mould occurring in the wood fibre. The thin plastic protective layer is all good until it too gets scratched, damaged or broken down by the sun or moisture.
It would appear, even today, that it’s very difficult to get composite engineered products to outdo the natural hardwood product when exposed to full weather. By the simple fact that most engineered products are nailed or screwed in some way during their installation, this allows moisture to enter which ultimately is the cause for the premature decay of these products.
While solid hardwood can be scratched, banged and abused all day long, it can always be lightly sanded and re coated back to new.
Our sawmill was built somewhere around 1910 and it’s standing and being worked hard, daily. There is no way on this earth, if it had been built from composite decking, particle board, laminated beams or plywood that it would still be standing today.
Thanks for your time and interest. Please call 07******1008 anytime for any questions and options regarding our timber products. For orders less than $450.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to Hervey Bay area. Pialba, Torquay, Burrum Heads, Childers, Woodgate, Maryborough, Tiaro, Bauple, Gunalda, Kilkivan, Goomeri, Tin Can Bay, Rainbow Beach, Gympie and nearby surrounding coastal suburbs.
Although our sawmill is predominantly a Blackbutt operation, we mill all sorts of locally grown hardwood. The real solid timber wall panel we produce makes a really good low maintenance ceiling lining over your entertaining deck which can be lightly oiled and left to go natural. Feature Grade (2nd grade) decking is always an option worth looking at and it will save you some money. Special price on the 70x20 Utility Grade (third grade). It’s a good time now to make the wife the Planter Box she’s been wanting! We mill it, dry it and machine it ourselves on site. You are buying direct from grower.
Forest Reds Feature Grade (2nd Grade)
72x22 $2.79, 80x20 $3.60, 82x22 $3.78, 90x20 $4.56, 94x22 $5.16, 118x20 $6.53,
122x22 $6.97, 140x20 $8.73, 144x22 $9.47
Blackbutt Feature Grade (2nd Grade)
70x20 $3.04, 72x22, $3.31, 80x20 $4.11, 82x22 $4.27, 90x20 $5.45, 94x22 $6.18,
113x19 $7.31, 118x20 $7.81, 122x22 $8.33, 135x19 $9.60, 140x20 $10.45,
144x22 $11.33, 158x24, $13.78, 163x27 $15.70
Mixed Hardwood Utility Grade (3rd Grade)
070x20 $1.61, 080x20-$2.30, 090x20 $2.74, 113x19$3.66, 135x19 $4.38
Decking isn’t a sideline for us. We’re a dedicated Hardwood Sawmill set up and specifically programmed to produce Hardwood Decking, Shiplap and Wall Panel. The time capsules that we harvest grows locally and within sight of our sawmill. You can still buy the same solid hardwood that we used to build our infrastructure many years ago.
A structure built from heavier locally grown hardwood is likely to last longer and be more durable than one built from glued waste pine sawdust and plastic.
Which brings me to composite decking. Most composite decking is basically 50% wood fibre and 50% plastic. It’s all good to say that the “glue” is weatherproof and will last forever but the timber fibre used was probably cheap waste pine fibre in the first place. Composite deck may not wear as well as natural hardwood in that it may not be as hard as natural hardwood. Some of the more expensive composite decking products are fully sealed with thin layer of plastic. They did this to stop the moisture from entering the composite board and deep mould occurring in the wood fibre. The thin plastic protective layer is all good until it too gets scratched, damaged or broken down by the sun or moisture.
It would appear, even today, that it’s very difficult to get composite engineered products to outdo the natural hardwood product when exposed to full weather. By the simple fact that most engineered products are nailed or screwed in some way during their installation, this allows moisture to enter which ultimately is the cause for the premature decay of these products.
While solid hardwood can be scratched, banged and abused all day long, it can always be lightly sanded and re coated back to new.
Our sawmill was built somewhere around 1910 and it’s standing and being worked hard, daily. There is no way on this earth, if it had been built from composite decking, particle board, laminated beams or plywood that it would still be standing today.
Thanks for your time and interest. Please call 07******1008 anytime for any questions and options regarding our timber products. For orders less than $450.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to Hervey Bay area. Pialba, Torquay, Burrum Heads, Childers, Woodgate, Maryborough, Tiaro, Bauple, Gunalda, Kilkivan, Goomeri, Tin Can Bay, Rainbow Beach, Gympie and nearby surrounding coastal suburbs.
Although our sawmill is predominantly a Blackbutt operation, we mill all sorts of locally grown hardwood. The real solid timber wall panel we produce makes a really good low maintenance ceiling lining over your entertaining deck which can be lightly oiled and left to go natural. Feature Grade (2nd grade) decking is always an option worth looking at and it will save you some money. Special price on the 70x20 Utility Grade (third grade). It’s a good time now to make the wife the Planter Box she’s been wanting! We mill it, dry it and machine it ourselves on site. You are buying direct from grower.
- Date Listed:09/04/2024
- Last Edited:09/04/2024
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- Treated hardwood round stumps / posts / logs (4 x available)MINIMUM PURCHASE of 2, prices and approx lengths below: 70cm long $15 67cm long $15 93cm long $15 70cm long $15 All range from 19cm to around 26cm in width. All unused, have just been sitting. Pick up Craignish, Hervey Bay.$15Craignish, QLD•299w
- CLIPSAL 1920MB3,CD HERITAGE 3 GANG TIMBER MOUNTING BLOCK CEDAR FINISHCLIPSAL HERITAGE 3 GANG TIMBER MOUNTING BLOCK 1920MB3,CD CEDAR FINISH Size: 90 x 225mm Barcode: 9311554187798 Cat No: 1920MB3,CD As new in original unopened pack as shown. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND F.O.B. FOR $11 EXTRA WITHIN AUSTRALIA, CLIPSAL 1923MB3,CD HERITAGE 3 GANG TIMBER MOUNTING BLOCK CEDAR FINISH - This Clipsal timber mounting block is an essential accessory for any electrical installation project. The 3-gang mounting block is suitable for use with Clipsal's Herita$12SHIPPING OFFEREDNegotiableUrangan, QLD•78w
- 12 Insulated Roof panels 4 meters long each .. sell $250 eachInsulated Roof panels with metal ceiling . Trimdek style roof 12 panels at 4 meters long each and 1000mm wide . 100 mm thick from ceiling to roof , sell $250 Each panel . will sell separate .. Ph Hervey Bay .$250Urangan, QLD•2w
- ESCO MEDICAL SERVICE PANEL POWER SOCKETS BEWB 6 (STANDARD POWER PANEL)ESCO MEDICAL SERVICE PANEL POWER SOCKETS BEWB 6 (STANDARD POWER PANEL) MODEL BEWB 6 Unit is like new, and was in original plastic wrap. Has not been installed. Includes recessed galvanized wall box. High quality unit, has double pole power points with indicators and a "supply available" indicator to show that mains power is available. Also a TV socket and a cutout for a call button unit. Please see photos for condition of unit and what is included. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND F$100SHIPPING OFFEREDNegotiableUrangan, QLD•38w
- ESCO MEDICAL SERVICE PANEL POWER SOCKETS BEWB 10 (LARGE POWER PANEL)ESCO MEDICAL SERVICE PANEL POWER SOCKETS BEWB 10 (LARGE POWER PANEL) Unit is like new, and was in original plastic wrap. Has not been installed. Includes recessed galvanized wall box. High quality unit, has double pole power points with indicators, 3 switches, RCD with alarm, and a cutout for a call button unit, and network socket Please see photos for condition of unit and what is included. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND F.O.B. FOR $26 EXTRA TO ANYWHERE IN AUSTRALIA$150SHIPPING OFFEREDNegotiableUrangan, QLD•38w
- Fencing www.ezybuild.net.auStockist of New Special 2400 panels Black 1200 high $89 Pool safe Australian standards certified 3m Panels $185 Posts 50 x 50 x 1800 long Availble $30.00 each Brackets available Set of 4 $13 Pool gate 970mm wide available $100 Double gates to suit 3m opening $300 Single gate kit Inc hinges and d/latch $40 Double gate Kit Inc hinges drop bolt and D/latch $70 Magna Safety latch and Spring hinges $100 Flange posts 1350 , 50 x50, $40 Flange posts 1650, 50x 50, $50 Deliver or pick up from our Ware$89SHIPPING OFFEREDMaryborough, QLD•3w
- CUPBOARD DOOR HANDLES DRAWER HANDLES X 2CUPBOARD DOOR HANDLES DRAWER HANDLES X 2 Good condition as shown, screws included. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND F.O.B. FOR $11 EXTRA TO ANYWHERE IN AUSTRALIA$10Urangan, QLD•66w
- 1000 new tek 35mm long metal drive galvanized screws1000 new and unused metal drive 35mm galvanized tek screws with rubber rings VGC.. sell $50 lot ph Hervey Bay$50Urangan, QLD•3w
- DIGITOR ATCO ISOLATING STEPDOWN TRANSFORMER 240V TO 115V 250VADIGITOR ATCO ISOLATING STEPDOWN TRANSFORMER 240V TO 115V 250VA Originally a Dick Smith Electronics Item. Very high quality unit - uses Australian made and approved ATCO brand Isolation transformer, so you know it will be approved to Australian standards and be safe, unlike some of the cheaper imports. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND FOR $22 EXTRA WITHIN AUSTRALIA$65SHIPPING OFFEREDNegotiableUrangan, QLD•113w
- CONCRETE SCREW BOLTS 12 X 150MM QTY 30CONCRETE SCREW BOLTS 12 X 150MM QTY 30 As new in original bag, leftover from project PICKUP FROM HERVEY BAY, QLD 4655 OR CAN POST FOR $19 EXTRA WITHIN AUSTRALIA$70SHIPPING OFFEREDNegotiableUrangan, QLD•113w
- Sunshine Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDMaroochydore, QLD•21h
- Gold Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBundall, QLD•21h
- Brisbane Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBrisbane City, QLD•21h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 1008