260 views
Woodland Mills WC88 8inch PTO tractor Woodchipper - Near New
$4,950
Near new Woodland Mills woodchipper - Model WC88
We have only used it twice and have sense sold our tractor and replaced with a front end loader. We no longer have a PTO or 3 point hitch to use the chipper.
Asking for $4950 including GST (Tax receipt will be provided)
NEW price is $5900 including shipping to Tasmania.
Other second hand Tractor gear available:
6ft heavy duty Galvanised PTO Slasher $2750inc GST (wheel needs to be welded back on)
7ft Box Blade $770 inc GST
6ft Carry all box $550 inc GST
Quick Hitch: $55 inc GST
The Woodland Mills WC88 8” (20cm) PTO drive wood chipper was designed for tractors with 35 to 100 HP. This heavy-duty wood chipper contains an auto hydraulic infeed system and 8″ x 8″ (20 cm x 20 cm) opening making it easy to feed branches of all shapes and sizes. The discharge chute was designed to rotate 360 degrees, making it easy to direct wood chips in any direction. By adjusting the rotating deflector at the end of the chute, you can choose to discharge chips for maximum distance or deflect them directly down to the ground or into a trailer.
Includes: Chainsaw Holder.
Drive System: Tractor PTO
Transport: Tractor 3 Point Hitch
Minimum HP Required (at the PTO): 35
Maximum HP (at the PTO): 100
Hydraulic System: Standard NPT Fittings & Valves
Hydraulic Oil: 19 L / 5 gallons of ISO 32 or ISO 46 (warmer climates)
Hydraulic Pump: Direct Drive (no belts)
Flywheel Diameter/Thickness: 24" x 1" thick (61cm x 2.5 cm thick)
Flywheel Speed: 1100 RPM
Flywheel Drive System: 4 BX Series Belts
Flywheel Housing Design: Easy To Open Clamshell (for easy clean out and blade changes)
Flywheel Housing Thickness: 5/16" (8mm) Thick
Flywheel Shaft: 2" (50mm) Diameter
Number of Blades: 4 Reversible Blades
In-feed System: Self Contained Hydraulic System
In-feed Drive: Forward/Neutral/Reverse With Variable Speed (0-75 ft-min) / (23 m/min)
In-feed Roller Size: 8.25" (21cm) Chisel Tooth
In-feed Opening: 8"x8" (20cm x 20cm)
In-feed Roller Pressure: Adjustable via Spring Tension
Quick Hitch Compatible: Yes
Discharge Chute: 360 Degree Swivel
Chipper Base: Adjustable Laser Cut Plate Design
Finish: Powder Coat Paint
PTO Shaft: Shear Pin Protected PTO Shaft Included
Product Weight: 900 lb [408 kg]
We have only used it twice and have sense sold our tractor and replaced with a front end loader. We no longer have a PTO or 3 point hitch to use the chipper.
Asking for $4950 including GST (Tax receipt will be provided)
NEW price is $5900 including shipping to Tasmania.
Other second hand Tractor gear available:
6ft heavy duty Galvanised PTO Slasher $2750inc GST (wheel needs to be welded back on)
7ft Box Blade $770 inc GST
6ft Carry all box $550 inc GST
Quick Hitch: $55 inc GST
The Woodland Mills WC88 8” (20cm) PTO drive wood chipper was designed for tractors with 35 to 100 HP. This heavy-duty wood chipper contains an auto hydraulic infeed system and 8″ x 8″ (20 cm x 20 cm) opening making it easy to feed branches of all shapes and sizes. The discharge chute was designed to rotate 360 degrees, making it easy to direct wood chips in any direction. By adjusting the rotating deflector at the end of the chute, you can choose to discharge chips for maximum distance or deflect them directly down to the ground or into a trailer.
Includes: Chainsaw Holder.
Drive System: Tractor PTO
Transport: Tractor 3 Point Hitch
Minimum HP Required (at the PTO): 35
Maximum HP (at the PTO): 100
Hydraulic System: Standard NPT Fittings & Valves
Hydraulic Oil: 19 L / 5 gallons of ISO 32 or ISO 46 (warmer climates)
Hydraulic Pump: Direct Drive (no belts)
Flywheel Diameter/Thickness: 24" x 1" thick (61cm x 2.5 cm thick)
Flywheel Speed: 1100 RPM
Flywheel Drive System: 4 BX Series Belts
Flywheel Housing Design: Easy To Open Clamshell (for easy clean out and blade changes)
Flywheel Housing Thickness: 5/16" (8mm) Thick
Flywheel Shaft: 2" (50mm) Diameter
Number of Blades: 4 Reversible Blades
In-feed System: Self Contained Hydraulic System
In-feed Drive: Forward/Neutral/Reverse With Variable Speed (0-75 ft-min) / (23 m/min)
In-feed Roller Size: 8.25" (21cm) Chisel Tooth
In-feed Opening: 8"x8" (20cm x 20cm)
In-feed Roller Pressure: Adjustable via Spring Tension
Quick Hitch Compatible: Yes
Discharge Chute: 360 Degree Swivel
Chipper Base: Adjustable Laser Cut Plate Design
Finish: Powder Coat Paint
PTO Shaft: Shear Pin Protected PTO Shaft Included
Product Weight: 900 lb [408 kg]
- Date Listed:13/04/2024
- Last Edited:13/04/2024
- Hours:3
- Listing Type:Private seller
- Model:WC88
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 5905