460 views
ELEKIT TU-8200R & TU-8500 PRE AMPLIFIER PACKAGE. (BUILD )
$2,850
ELEKIT JAPANESE PRE AMPLIFIERS
RF WAVES AUSTRALIAN DISTRIBUTOR FOR ELEKIT JAPAN
2 YEAR WARRANTY
TU 8200R Main amplifier
Discover the differences in listening pleasure with the flexibility of various power tubes and output modes. This is a single power amplifier using natural sounding and powerful 6L6GC tubes. Here below are the main features of this power amplifier.
[Features]
- Comes with 6L6GC power tubes, but also supports wide range of power tubes, such as KT88, KT90, KT66, EL34, etc.
- A newly developed "Active automatic bias adjustment function automatically adjusts the bias for the optimal condition for each tube.
- 3 types of amplifier mode; Ultra Linear, Triode, and Pentode, can be selected simply by moving the jumper plugs on the PCB.
- INPUT1/INPUT2 on the back panel, and a headphone jack on the front panel.
- FET ripple filter on board for power B for both right and left channels.
- Overcurrent protection circuit on board.
- Worldwide power transformer to support 4 different voltage environments: 100V, 115V, 200V and 230V (selectable upon assembly).
- Fiberglass PCB with 70um thick copper is used to increase electrical conductivity and dissipate heat.
- Most of the circuit components are mounted on the PCB and the PCB units are connected by cords with connectors so that even beginners can solder and assemble without difficulty.
Specs
Stock tube: 6L6GC x 2pcs, 12AU7 x 2pcs
Rated output: 6L6GC (UL connection) 8W 8W (All 8ohm loaded)
6L6GC (Pentode) 8.2W 8.2W
6L6GC (Triode) 4W 4W
Rated input: 6L6GC (UL connection): 340mV
Residual noise: 6L6GC (UL connection): 0.90mV (IEC)
Frequency response: 12hZ - 50kHz (-3dB)
Input terminal: LINE x 2(LINE1, LINE2)
3.5mm stereo mini jack
(Common with LINE2, but has a priority to LINE2)
Output terminal: Speaker output terminal
(4-6.3ohm, 8-16ohm: Switching)
Gold-plated screw type terminal
(Banana plug can be used.)
Power voltage: AC100V 50/60Hz (3P inlet)
*115V, 200V, or 230V specifications available.
Power consumption: 60W (with 6L6GC)
Dimensions: W252 x H158 x D285mm
TU-8500 PRE AMPLIFIER
This is a preamp kit with a phono equalizer with features such as below;
Precision phono stage RIAA equalization (CR not NF); supports both MM and MC cartridges.
Two low noise OPamps are used in the phono equalizer amp circuitry. OPamp preference are accommodated by use of socket mounts allowing easy substitution of alternative OPamps.
Two 12AU7 (ECC82) tubes are used in the line amp stage. Gain is switchable (Approx 1x to 3x).
Reduced hum/background noise circuitry includes a low flux leakage R-core transformer, a FET ripple filter for B-power and the tubes are powered by the DC power supply.
Sufficient space has been provided on the PCB for substitution of larget coupling capacitors.
Support for 4 different voltage environments including Australia (set during assembly).
Ideal complement to TU-8200 power amp.
SPECS
Stock tube: 12AU7 (ECC82) x 2pcs
OPamp: NJM2068DD x 2pcs
Input terminal: RCA jack 4 lines (PHONO, LINE 1-3)
3.5mm stereo jack 1 line (LINE3 priority)
Output terminal: RCA jack 1 line (PRE OUT)
Power voltage: AC 100V 50/60Hz IEC standard inlet
* Select from 100V, 115V, 200V, and 230V upon assembly
Power consumption: 8W
Dimensions: W252 x H73 x D270 mm (excl. projections)
Weight: Approx.3.1kg (Assembled, excl. power cord)
[Line Amp Stage]
Gain: x3.1(9.8dB) / x1.15(1.2dB)
Frequency response (-3dB): 2Hz-70kHz / 2Hz-280kHz
SN ratio (IHF-A): 122dB / 129dB
Max.output voltage: 22V rms (1kHz)
[Equalizer Amp Stage]
RIAA equalization: ±0.5dB tolerance (20Hz-20kHz)
Cartridge: MM (LOW) / MC (HIGH) switchable
Gain (1kHz): [MM] 37dB / [MC] 63dB
SN ratio (IHF-A): [MM]108dB / [MC]88dB
Input resistance: [MM] 50kΩ / [MC] 100Ω
Max.output voltage: 7.4V rms (1kHz)
RF WAVES AUSTRALIAN DISTRIBUTOR FOR ELEKIT JAPAN
2 YEAR WARRANTY
TU 8200R Main amplifier
Discover the differences in listening pleasure with the flexibility of various power tubes and output modes. This is a single power amplifier using natural sounding and powerful 6L6GC tubes. Here below are the main features of this power amplifier.
[Features]
- Comes with 6L6GC power tubes, but also supports wide range of power tubes, such as KT88, KT90, KT66, EL34, etc.
- A newly developed "Active automatic bias adjustment function automatically adjusts the bias for the optimal condition for each tube.
- 3 types of amplifier mode; Ultra Linear, Triode, and Pentode, can be selected simply by moving the jumper plugs on the PCB.
- INPUT1/INPUT2 on the back panel, and a headphone jack on the front panel.
- FET ripple filter on board for power B for both right and left channels.
- Overcurrent protection circuit on board.
- Worldwide power transformer to support 4 different voltage environments: 100V, 115V, 200V and 230V (selectable upon assembly).
- Fiberglass PCB with 70um thick copper is used to increase electrical conductivity and dissipate heat.
- Most of the circuit components are mounted on the PCB and the PCB units are connected by cords with connectors so that even beginners can solder and assemble without difficulty.
Specs
Stock tube: 6L6GC x 2pcs, 12AU7 x 2pcs
Rated output: 6L6GC (UL connection) 8W 8W (All 8ohm loaded)
6L6GC (Pentode) 8.2W 8.2W
6L6GC (Triode) 4W 4W
Rated input: 6L6GC (UL connection): 340mV
Residual noise: 6L6GC (UL connection): 0.90mV (IEC)
Frequency response: 12hZ - 50kHz (-3dB)
Input terminal: LINE x 2(LINE1, LINE2)
3.5mm stereo mini jack
(Common with LINE2, but has a priority to LINE2)
Output terminal: Speaker output terminal
(4-6.3ohm, 8-16ohm: Switching)
Gold-plated screw type terminal
(Banana plug can be used.)
Power voltage: AC100V 50/60Hz (3P inlet)
*115V, 200V, or 230V specifications available.
Power consumption: 60W (with 6L6GC)
Dimensions: W252 x H158 x D285mm
TU-8500 PRE AMPLIFIER
This is a preamp kit with a phono equalizer with features such as below;
Precision phono stage RIAA equalization (CR not NF); supports both MM and MC cartridges.
Two low noise OPamps are used in the phono equalizer amp circuitry. OPamp preference are accommodated by use of socket mounts allowing easy substitution of alternative OPamps.
Two 12AU7 (ECC82) tubes are used in the line amp stage. Gain is switchable (Approx 1x to 3x).
Reduced hum/background noise circuitry includes a low flux leakage R-core transformer, a FET ripple filter for B-power and the tubes are powered by the DC power supply.
Sufficient space has been provided on the PCB for substitution of larget coupling capacitors.
Support for 4 different voltage environments including Australia (set during assembly).
Ideal complement to TU-8200 power amp.
SPECS
Stock tube: 12AU7 (ECC82) x 2pcs
OPamp: NJM2068DD x 2pcs
Input terminal: RCA jack 4 lines (PHONO, LINE 1-3)
3.5mm stereo jack 1 line (LINE3 priority)
Output terminal: RCA jack 1 line (PRE OUT)
Power voltage: AC 100V 50/60Hz IEC standard inlet
* Select from 100V, 115V, 200V, and 230V upon assembly
Power consumption: 8W
Dimensions: W252 x H73 x D270 mm (excl. projections)
Weight: Approx.3.1kg (Assembled, excl. power cord)
[Line Amp Stage]
Gain: x3.1(9.8dB) / x1.15(1.2dB)
Frequency response (-3dB): 2Hz-70kHz / 2Hz-280kHz
SN ratio (IHF-A): 122dB / 129dB
Max.output voltage: 22V rms (1kHz)
[Equalizer Amp Stage]
RIAA equalization: ±0.5dB tolerance (20Hz-20kHz)
Cartridge: MM (LOW) / MC (HIGH) switchable
Gain (1kHz): [MM] 37dB / [MC] 63dB
SN ratio (IHF-A): [MM]108dB / [MC]88dB
Input resistance: [MM] 50kΩ / [MC] 100Ω
Max.output voltage: 7.4V rms (1kHz)
- Date Listed:12/07/2020
- Last Edited:12/07/2020
- Condition:New
Similar Ads
- Vintage Sharp SM-21 Integrated Stereo Amplifier (Made in Japan)Selling this Sharp SM-21 Stereo Integrated Amplifier. It is in good working condition except there is no sound on the right and no selector switch light. This Sharp SM-21 comes with attached power cable. Made in Japan, good quality production, high-end build quality utilising top quality materials and internal components. The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are welcome to inspect the item and please ask all questi$100SHIPPING OFFEREDNegotiableMelville, WA•67w
- Vintage PHILIPS 1970s Model 22AH 691 AM FM Stereo Receiver AmplifierSelling this Vintage PHILIPS 1970's Model 22AH 691 AM FM Stereo Receiver Amplifier. It is in good working condition. It has a phono input - perfect for turntable. It has great build quality. The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are welcome to inspect the item and please ask all questions before buying. Thank you. Product Information Brand: PHILIPS Model: 22AH 691 Country: Made in Japan Year: 1970s Type: AM FM Ster$150SHIPPING OFFEREDNegotiableAttadale, WA•45w
- REGA Fono Mini A2D Phono Pre AmplifierThe Rega Fono Mini A2D is a high-quality phono pre-amplifier for use with any moving magnet cartridge. The addition of a USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user-friendly front and back panels that make this phono pre-amplifier a very easy product t$180Mosman Park, WA•2w
- Arcam Diva A70 stereo HiFi amplifierMade in UK 50w per channel into 8 ohms, 100 watts into 4 ohm MM phono Excellent build and condition Remote Power cable$350Willetton, WA•1w
- AKAI AM-U33 Stereo Integrated Amplifier (Made in Japan)Selling this AKAI AM-U33 Stereo Integrated Amplifier (Made in Japan). It is in good working condition and you can watch the actual item in operation (watch video - https://youtu.be/D_FsWgvgRlY). The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are welcome to inspect the item and please ask all questions before buying. Thank you. Product Information Brand: AKAI Model: AM-U33 Era: 1980s Made in Japan Type: Stereo Integrated Amp$250SHIPPING OFFEREDAttadale, WA•3w
- Musical fidelity pre amplifier - latest modelModel is the M6s PRE. In mint condition. Used as a pre amp for my active speakers. Selling as I am upgrading. Unit is about 10 months old. Due to an opportunity to upgrade, I have to let this go. Has both balanced and unbalanced output. Excellent phono stage. Comes with remote, manual and original packaging. Can ship at buyers cost. This is a well built pre amp that performs way above its price range. Currently retails for about $3200$2,700Gwelup, WA•4w
- MYTEK Manhattan II DAC / Headphone Amplifier (SILVER)MYTEK Manhattan II DAC / Headphone Amplifier with Network Streamer (SILVER) ***Final Price Drop - price is inclusive of shipping anywhere in Australia*** DESCRIPTION MYTEK is a name that carries with it a ton of respect from the Audiophile community, and for sale here is their flagship DAC / Headphone Amplifier - the highly revered Manhattan II. I have owned this for about 4 months since new, purchased from a local retailer after a very lengthy research into finding the best end game DAC. I$5,750SHIPPING OFFEREDWest Perth, WA•11w
- Linn Majik DSM integrated amplifierGreat condition, has streaming and phono stage built in. Linn Majik DSM Black Chakra Power & Dynamik Power Supply 2x 100 Watts in 8 Ohms 3x Coax Digital Inputs 3x Optical Digital Inputs 1x Coax Digital Output 1x Optical Digital Output 4x HDMI Inputs 1x HDMI Output 4x Analogue Inputs (one of them can be used as Phono MM) 1x Analogue Output (Pre Out) 1x Analogue Output (Line Out) 1x Ethernet 1x Headphone Jacket 1x Analogue Input 3.5mm Front Pick up in subiaco only, no shipping$2,750NegotiableSubiaco, WA•7w
- STUNNING German Hybrid Amps By Magnat Upto 200 x 200watts Pure sineWe have moved to a New commercial location with a new Name NeW ReTRO Audio Warehouse Morley Demos are by appointment Address is Catherine Street Morley, Next to the Morley Roller Drome. There are no signs no glamour just great new and used audio, including a new Rehome Audio section The Magnat MR780 Hybrid receiver Is simply amazing, I use it for many of my Demos, even on $22,000 speakers, The audio quality is simply smooth, it offers high end quality at affordable value. Many High end review$2,699Bassendean, WA•61w
- Quality Marantz stereo equipment with original boxesStereo receiver amplifier SR-50. With Phono, Tape, CD, Radio functions etc made in Japan early 1990's. 40W per channel with remote control. A & B speaker switch, 4 speakers can be connected. A highly rated amp with a good Phono stage for playing your records on. $320. SOLD- Tape player- SD415 stereo cassette deck. Twin tape, auto reverse. Easy to use and great to record your music to tape on. Has a remote! 1990's model. $120. SOLD CD player- CD5001. Audiophile level great sound. Single tray wit$620NegotiableCoolbinia, WA•4w
- AUDIO AMPLIFIER REPAIR & UPGRADE SERVICESBeing a qualified Electronics engineer and an Audiophile for 17 years I have worked on all types of solid state and vaccaum tube amplifirers and carried out SMD and BGA level repair works For the past 8 years we have served audio enthusiasts arroud Perth and many in other states. We have maintained a worderfull customer service relationship. Now we serve with an upgrated workshop equipped with advanced test equipment to provide grater customer satisfaction. Our services Repair and upgrade allHamersley, WA•4w
- VINTAGE CLASSIC AMPLIFIER REFURBISH SERVICE REPAIR ( FREE QUOTE)FREE QUOTE NO INSPECTION FEEE WE REPAIR UPGRADE SERVICE ALL CLASSIC VINTAGE AUDIO AMPLIFIERS. CAPACITOR UPGRADE BIAS ADJUST CLEAN CONTROL POTS 20 YEARS Experience in Electronics repair and service Home base business minimum cost Open 7 days a week 7-7pm Work on MARANTZ ,TEAC.PIONEER,NAD,ROTEL,SONY,SANSUI and etc FREE QUOTATION AND PICK UP DROP CAN BE ORGANISE.Hamersley, WA•9w
- Elekit TU 8550 Pre amp kit without tubesIF You are just window shopping STOP I have value for my time.. This is the kit price no tubes Tube mullard 6 pcs extra 300aud.. SPECIFICATIONS [ CIRCUIT CONFIGURATION, STOCK TUBE ] Flat amp (LINE amp) : 2× 12AX7, 1× 12AU7 Single-end input/output Equalizer : 2 x 12AX7, 1 x 12AU7 CR type RIAA equalizer amp A-power : DC power (all tubes) B-power : MOSFET ripple filter, Slow-start rated voltage power [ EQUALIZER AMP STAGE ] [ MAX. output voltage ] 20Vrms (1kHz) [ Gain (1kHz)] 29dB [ Residual$1,650Hamersley, WA•21w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here