79 views
Saxon 90/900 AZ3 telescope and Saxon Cielo HD 9mm 1.25in ED Eyepiece
$400
Saxon 90/900 AZ3 telescope and Saxon Cielo HD 9mm 1.25in ED Eyepiece bought in Sirius Optics in Feb 2023.
I used it three times since it is sitting in the box. Pretty much brand new.
I used it three times since it is sitting in the box. Pretty much brand new.
- Date Listed:10/03/2024
- Last Edited:01/05/2024
- Condition:New
Similar Ads
- SAXON 8 INCH DEEPSKY DOBSONIAN TELESCOPESAXON 8 INCH DEEPSKY DOBSONIAN reflector TELESCOPE , in excellent condition, rarely used. Comes with 2 lenses 10mm and 25mm. The saxon 8" DeepSky CT Dobsonian Telescope features a powerhouse telescope with amazing light-gathering capabilities that's easy to use and transport. This beginner telescope is the retractable twin to the full-tube Saxon 8" DeepSky Dobsonian Telescope and comes with the same specs of having a mirror of 203mm aperture (diameter) and a focal length of 1200mm. NOTE: This$599NegotiableLogan Village, QLD•8w
- Carton Wide Field Astronomical Telescope Model 878Carton Wide Field Astronomical Telescope Model 878. F/7. Large diameter 31.7mm eyepiece gives very wide field and clear image. High quality 60mm diameter objective lens with short focal length 420mm make a very bright image. Includes 6 x 30mm finder scope . Suitable for astro-photography with optional camera adapter (not supplied). Two eyepieces supplied: K-28mm and PL-8mm. Note Tripod is not supplied. Can freight via Australia Post at buyers cost.$100Murrumba Downs, QLD•2w
- New 25-50 ton (100/90/80mm pin) 810mm Excavator Compaction WheelThe price includes GST. New 810mm Wide Drum, Excavator Compaction Wheel suit 25-50 Ton machine. 4 rows of pads. Fitted with dual mud scrapers between the pads. Drum: * Width: 810mm. * Curved Steel Plate thickness: 25mm (see pic#8). * Curved Steel Plate Diameter: 1005mm (not including pads). * Total Diameter including pads: 1185mm. Pads (tapered): * Height: 90mm. * Size at Top: 120mm wide x 140mm long. * Size at Base: 130mm wide x 225mm long. Frame Steel: * Vertical Side Plate thickness: 30m$10,950Pullenvale, QLD•5w
- 25-46 ton (110/100/80mm pin) Excavator Headstock Hitch Mounting PlateThe price includes GST. 100mm & 110/80mm pin Excavator Headstock to suit 25-46 ton machines. There is some light surface rust and a few bangs around the mount plate but is otherwise in great condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Current Headstock setup: One Pin is 100mm Diameter the other is an 80mm pin that has a sleeve (tube) fitted over it to make it 110mm. 555mm Pin Center$1,100Pullenvale, QLD•5w
- 90mm pin Hitch grabs 80 & 90mm buckets, New Doherty D-Lock Quick HitchThe price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,$8,950Pullenvale, QLD•13w
- Barely used 20-48 ton (90mm pin) 800mm TE Excavator GP Digging BucketThe price includes GST. 90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...). It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick! Condition is used but it has had$3,250Pullenvale, QLD•5w
- 21-48 ton (90-100mm pin) Hydraulic Excavator Quick Hitch CouplingThe price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 21-48 Ton machines, but is designed to allow a 90mm Pin machine to pickup attachments with 90-100mm Pins and a wider Pin Center distance. Made for Machines: Daewoo DX300 LC / Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK250LC / SK290LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC30$3,650Pullenvale, QLD•5w
- 22-50 ton (100/90/80mm pin) Titan Excavator Compaction WheelThe price includes GST. Used 545mm Wide Drum, Titan Excavator Compaction Wheel suit 22-50 Ton machines. 4 rows of pads and fitted with dual Mud Scrapers between the pads. Conditions is used, it has a few bangs & dints but rolls smooth and has plenty of life left. It has had several Headstock Pin Spacing modifications done which allows for a greater range of machines it can fit. This is a well engineered, heavy duty Compaction Wheel, made in Australia by Titan Manufacturing. Drum: * Width: 5$5,650Pullenvale, QLD•5w
- 23-47 ton (100, 90mm pin) 1500mm Heavy Duty Excavator GP Mud BucketThe price includes GST. Used 1500mm Excavator Heavy Duty Mud Bucket suit 23-47 Ton machine. Condition is used and it has a few bangs and a dent underneath but has had some professional repairs and it is a very sturdy bucket with plenty of life left and has lots of extra welds on the wearing surfaces. It has Tapered sides so the mud slides out easily and there is also extra wear strips welded underneath for durability (see pic#10). Current Headstock configuration: Front Pin Diameter is 100mm,$3,250Pullenvale, QLD•5w
- New 15-40 ton (90mm or 80mm pin) 800mm AHE Excavator GP Digging BucketThe price includes GST. New 800mm AHE Excavator Digging & Trenching GP Bucket suit 15-40 Ton machine. This bucket is surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It has a deep profile and is in perfect New condition. It has removable bolt-on Side Cutters and is fitted with Genuine Caterpillar Teeth. There are also extra Wear Strips welded underneath for durability (see pic #10). The cutting edges of the sides of the bucket are 32mm thick. *** Current Headstock c$4,950Pullenvale, QLD•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8729