226 views
SAVE! Happ12 full rise 3T scissor lift WH&S aprvd for bus 3yr warranty
$4,990
CURRENTLY ON SPECIAL! Save $1000!!!!! Yes that is correct - $1k!
Call today.
CAN VIEW IN WILLOW VALE prior to buying.
The HAPP12 scissor hoist is great for people who want a full rise scissor lift that allows you to work on the car’s drive train easily. It packs flat when you aren’t using it and can be used for all kinds of automotive maintenance and repairs. The 1850 lift height is more than many of the non Happ lifts sold in the market.
The HAPP 12 is tested and passed against Australian Standards with a safe working load of 3T. It has been registered with Qld Workplace Health and Safety so is able to be used in commercial workshops. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
Features
Fast Dual-cylinder dual scissor lifting system
Stable lifting and lowering
HAPP Australian Standard designs – designed verified against AS1418.9 and many other Australian Standards by Queensland engineers.
Precision CNC controlled cutting and Robot welding provide highest quality product.
Electric release solenoids, no need for air to operate lift.
Variable rate arms ensure even heavy vehicles can lift from ground.
Control unit is of exceptional quality to other lift suppliers
Moveable control unit and lift
High grade scissor beams exceed Australian standards
Toe protection guards
Anti slip tread plates
Latches, pins and locking ladder use premium steel grades that exceed Australian standards
Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
Upgrade from CE certified (Europe and USA) with HAPP Aus Std designs
Electronic max height limit switch
Access to HAPP customer group buy plan
Colour is blue platform / base and grey scissor
Heavy use users use the HAPP 12A with air solenoids
Specs
Maximum Load Capacity – 3000 Kg
Maximum Lifting Height – 1850mm
Minimum Lifting Height – 110mm
Width between runways – 800mm
Outer dimensions (LxWxH) – 2083 x 2100 x 180mm
Table length – 1475mm
Runway width – 650mm
Middle gap – 800mm
Motor Capacity – 240V, Single phase
Gross Weight – 857kgs
Nett Weight – 841kgs
Plastic powder coat finish
Packing dimensions of hoist: 2130 x 735 x 375mm
Packing dims of control box: 1140 x 425 x 485mm
Weight of control box: GW:47KG, NW:27KG
The HAPP 12 is optimised for low frequency users as it uses electronic solenoids to operate the safety latch, making the installation and operation simpler as it does not require any compressed air connection to operate. Most users of scissor lifts prefer this option.
WH&S kit - $200 optional
Pickup/Del
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Hendra, or arrange your own freight (there is a $20 warehouse fee on all orders). To obtain a FREIGHT quote or you have banking questions, please contact us direct *******3497 or email cus******@******.au for more information.
T’s & C’s
Please note, there is a $20 warehouse fee on all orders, and if paying by cc, we have to add 1.7% for bank.
If you have any TECHNICAL questions, phone Gavan on *******8477.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards. Our catalogue shows this picture on EVERY CAR LIFT. BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.
Check our customer reviews http://happ.com.au/blog/
Follow us on Insta: https:://www.instagram.com/happ_australia/
Follow us on FB
Call today.
CAN VIEW IN WILLOW VALE prior to buying.
The HAPP12 scissor hoist is great for people who want a full rise scissor lift that allows you to work on the car’s drive train easily. It packs flat when you aren’t using it and can be used for all kinds of automotive maintenance and repairs. The 1850 lift height is more than many of the non Happ lifts sold in the market.
The HAPP 12 is tested and passed against Australian Standards with a safe working load of 3T. It has been registered with Qld Workplace Health and Safety so is able to be used in commercial workshops. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
Features
Fast Dual-cylinder dual scissor lifting system
Stable lifting and lowering
HAPP Australian Standard designs – designed verified against AS1418.9 and many other Australian Standards by Queensland engineers.
Precision CNC controlled cutting and Robot welding provide highest quality product.
Electric release solenoids, no need for air to operate lift.
Variable rate arms ensure even heavy vehicles can lift from ground.
Control unit is of exceptional quality to other lift suppliers
Moveable control unit and lift
High grade scissor beams exceed Australian standards
Toe protection guards
Anti slip tread plates
Latches, pins and locking ladder use premium steel grades that exceed Australian standards
Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
Upgrade from CE certified (Europe and USA) with HAPP Aus Std designs
Electronic max height limit switch
Access to HAPP customer group buy plan
Colour is blue platform / base and grey scissor
Heavy use users use the HAPP 12A with air solenoids
Specs
Maximum Load Capacity – 3000 Kg
Maximum Lifting Height – 1850mm
Minimum Lifting Height – 110mm
Width between runways – 800mm
Outer dimensions (LxWxH) – 2083 x 2100 x 180mm
Table length – 1475mm
Runway width – 650mm
Middle gap – 800mm
Motor Capacity – 240V, Single phase
Gross Weight – 857kgs
Nett Weight – 841kgs
Plastic powder coat finish
Packing dimensions of hoist: 2130 x 735 x 375mm
Packing dims of control box: 1140 x 425 x 485mm
Weight of control box: GW:47KG, NW:27KG
The HAPP 12 is optimised for low frequency users as it uses electronic solenoids to operate the safety latch, making the installation and operation simpler as it does not require any compressed air connection to operate. Most users of scissor lifts prefer this option.
WH&S kit - $200 optional
Pickup/Del
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Hendra, or arrange your own freight (there is a $20 warehouse fee on all orders). To obtain a FREIGHT quote or you have banking questions, please contact us direct *******3497 or email cus******@******.au for more information.
T’s & C’s
Please note, there is a $20 warehouse fee on all orders, and if paying by cc, we have to add 1.7% for bank.
If you have any TECHNICAL questions, phone Gavan on *******8477.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards. Our catalogue shows this picture on EVERY CAR LIFT. BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.
Check our customer reviews http://happ.com.au/blog/
Follow us on Insta: https:://www.instagram.com/happ_australia/
Follow us on FB
- Date Listed:23/12/2022
- Last Edited:05/03/2024
- Condition:New
- Warranty:Yes
Similar Ads
- Holden Commodore Key Buttons - Remote control button repair kitAre your Commodore car key buttons worn out or broken? Don't worry, you don't have to buy a new key for $120 - $150! Just replace the buttons and you're good to go! No need to open up your key, No need to reset or configure your key electronics. Simply remove your old worn out rubber buttons and push in the new ones. All from the outside of the key. Get these high quality replacement buttons now for a fraction of the cost of a new car key! Suitable for any Holden Commodore Berlina, Capric$19Newstead, QLD•224w
- Holden Commodore 97 - 03 VT VX Statesman Ute HSV Monaro Dash MatHolden Commodore & Versions Dashmats Hit More Plus tab to read full add Total 8 Differant ones PRICED FROM $25.00 XXX To suit WITHOUT Passenger Air Bag XXX 1 x Dark Grey , overall good condition, no fraying or stains $25.00 2 x Charcoal Overall VERY good Condition , no fraying or stains $25.00 Each 1 x Light Grey, good condition no fraying $25.00 XXX To suit WITH Passenger Air Bag XXX 2 x NEW 1 - Grey & 1 - Charcoal $35.00 Each 1 x Charcoal, As New missing$25Mount Gravatt, QLD•358w
- Aluminium Side Full Opening Toolbox Truck Ute Trailer Box 1468FDDelivery across Queensland, Delivering safety to your door, make sure you check out our website, once the box is ordered the box will leave our warehouse the same day, the item should arrive at your DOOR within 2-5days. Our boxes are Heavy Duty, check out our Quality Jump Test Video on our website. toolsinabox Delivery to anywhere in Queensland. Pickup Or Delivery Australia Wide Heavy Duty Aluminium Toolbox made out of: 3mm Including Checker 2.5mm Excluding Checker Full Side$800Brisbane City, QLD•20h
- Aluminium Side Full Opening Toolbox Truck Ute Trailer Box 1768FDDelivery across Queensland, Delivering safety to your door, make sure you check out our website, once the box is ordered the box will leave our warehouse the same day, the item should arrive at your DOOR within 2-5days. Our boxes are Heavy Duty, check out our Quality Jump Test Video on our website. toolsinabox Best Rates 0 Recessed Door for maximum protection. Delivery to anywhere in Queensland. Pickup Or Delivery Australia Wide Heavy Duty Aluminium Toolbox made out of:$950Brisbane City, QLD•19h
- Aluminium Side Full Opening Toolbox Truck Ute Trailer Box 2168FDDelivery across Queensland, Delivering safety to your door, make sure you check out our website, once the box is ordered the box will leave our warehouse the same day, the item should arrive at your DOOR within 2-5days. Our boxes are Heavy Duty, check out our Quality Jump Test Video on our website. toolsinabox Delivery to anywhere in Queensland. Pickup Or Delivery Australia Wide Heavy Duty Aluminium Toolbox made out of: 3mm Including Checker 2.5mm Excluding Checker Full Side$1,200Brisbane City, QLD•19h
- Aluminium Side Full Opening Toolbox Truck Ute Trailer Box 1457FDDelivery across Queensland, Delivering safety to your door, make sure you check out our website, once the box is ordered the box will leave our warehouse the same day, the item should arrive at your DOOR within 2-5days. Our boxes are Heavy Duty, check out our Quality Jump Test Video on our website. toolsinabox Delivery to anywhere in Queensland. Pickup Or Delivery Australia Wide Heavy Duty Aluminium Toolbox made out of: 3mm Including Checker 2.5mm Excluding Checker Full Side$620Brisbane City, QLD•19h
- Aluminium Side 3/4 Opening Toolbox Truck Ute Trailer Box 968HDDelivery across Queensland, Delivering safety to your door, make sure you check out our website, once the box is ordered the box will leave our warehouse the same day, the item should arrive at your DOOR within 2-5days. Our boxes are Heavy Duty, check out our Quality Jump Test Video on our website. toolsinabox Delivery to anywhere in Queensland. Pickup Or Delivery Australia Wide Heavy Duty Aluminium Toolbox made out of: 3mm Including Checker 2.5mm Excluding Checker 3/5 Side O$600Brisbane City, QLD•19h
- NEW REDARC TOW PRO ELITE EBRH-ACCV3 $699 SUPPLY AND FITTEDRedarc Tow-Pro ELITE 12 The Tow-Pro Elite 12 is suitable for 12-volt applications only and is the only real choice when it comes to electric braking for your caravan or trailer: REDARC Tow-Pro. No matter what you’re towing, the REDARC Tow-Pro has you covered. The Tow-Pro Elite provides users with the ability to swap between Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode, popular for off-road driving. Simple to install, the Tow-Pro Elite is com$699Brisbane Region, QLD•9w
- Isuzu MUX DMAX 12 - 17 Dash Mat DashmatIsuzu MUX & DMAX Dash Mat Hit More Plus tab to read full add. I Only, Black, velour, moulded style, overall very good condition, no stains, rips. Edging all intact, bit fluffy in sections. Suits both Vehicles with Lift up Dash Compartment MUX 11/2013 - 01/2017 LS-M / LS-U DMAX 07/2012 - 02/2017 TFR85J TFS85J MY12 LSU / LS $30.00$30Mount Gravatt, QLD•289w
- Ute Checker Plate Canopy Available! Heavy Duty & In Stock!Superior Trailers Aluminium Canopies are a quality lightweight and strong canopy designed for all tradesmen, camping enthusiasts and anyone else looking for a good looking and practical solution for their Trayback Ute. These units can be retro fitted to either an existing Ute Tray or a complete conversion incorporating a new Ute Tray from a factory body can be installed. Our canopies have large side opening doors which provide exceptional access to your tools and equipment. High lift side ac$2,999Archerfield, QLD•35w
- SPECIAL! 4T car hoist 1.9mtr lift HAPP40P Bris or freight 5*GoogleSAVE $200 while stocks last complimentary ramps also included - call for stock and availability Can view in Willow Vale. Review from Rait P - https://happ.com.au/rait-pinnak-happ40p-2-post-clear-floor-asymmetric-arms/ See our 5 Star Reviews on Google! GST INC AND COMES WITH A 3 YR WARRANTY We are proud to announce that after extensive detailed structural analysis, cost and time, the HAPP40P model is available with Australian Standards certification and can easily be registered with WH&$3,690Hendra, QLD•2d
- Tyre machine Combo HAPP TC10 WB10 perfect for race car / home workshop$180 savings for the combo pack! Perfect for the beginner or those doing race car tyres or if you are a small workshop. In stock and ready to sell as a combo SAVE $180!! TC10 – Swing Arm Tyre Changer – $1490 gst inclusive individual price The TC 10 is our most cost effective tyre changer, used a lot by race car drivers, enthusiasts and small workshops that don’t have time to take tyres to other shops and wait for the job. It can be fitted with the optional top assist arm for difficult tyres suc$2,690Hendra, QLD•3d
- $390 DISCOUNT! Car Hoist 4T 2 post HAPP 60P Bris 240v w/FREE ramps!SAVE $390! was $3690, on sale for $3300! FREE ramps with this model! While stocks last GST INC WITH A 3 YR STRUCTURAL WARRANTY - https://happ.com.au/warranty/ MADE NEARLY ENTIRELY WITH ROBOTS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. The HAPP 60P is a great choice for users with infrequent use of the lift. It has a low column height for low ceilings and provides a cost effective lift with full HAPP reliability. Great for enthusi$3,300Hendra, QLD•3d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 497