140 views
Vintage Soda Siphon (is available). Made in Czechoslavia
$40
SHIPPING OFFERED
Vintage Soda Siphon (is available).
Made in Czechoslovakia in the 1980's by Merkuria Kovocas. (See pic 7)
On the glass base is the Merkuria Kovocas mark of an “M” inside a triangle (I added black pen to improve visibility). (See pic 8)
The siphon no longer functions so its best as a decoration for your bar or man-cave.
Constructed with a thick glass bottle which is encased in braided, chromed steel mesh.
It has the original rubber ring to protect the base of the bottle.
The top is black plastic with a chromed metal handle and top screw. The CO2 gas bulb holder is alloy.
The chrome cap that fits over the charging port is NOT available (but who cares? as it can be displayed with the bulb holder there instead).
A few CO2 bulbs are included but should be considered as part of the display item.
Capacity to the red fill line is 1 litre.
Weight: 2276g, Height: 37cm, Centre 12cm diam, Base: 9cm diam
CONDITION:
The chromed steel mesh has no corrosion, dents or flaws...looks good!
The chrome plating of neck shows wear (where you hold it when assembling).
There's some surface corrosion of the dispenser mounting thread.
Dispensing head and bulb holder are in good condition: no cracks, no scratches.
The internal rubber seal and plastic siphon are in good condition BUT the bulb seal has failed.
I will Pack and Post to your Australian address. Please advise your Postcode so that I can provide an exact Packed price.
Item is not returnable
Made in Czechoslovakia in the 1980's by Merkuria Kovocas. (See pic 7)
On the glass base is the Merkuria Kovocas mark of an “M” inside a triangle (I added black pen to improve visibility). (See pic 8)
The siphon no longer functions so its best as a decoration for your bar or man-cave.
Constructed with a thick glass bottle which is encased in braided, chromed steel mesh.
It has the original rubber ring to protect the base of the bottle.
The top is black plastic with a chromed metal handle and top screw. The CO2 gas bulb holder is alloy.
The chrome cap that fits over the charging port is NOT available (but who cares? as it can be displayed with the bulb holder there instead).
A few CO2 bulbs are included but should be considered as part of the display item.
Capacity to the red fill line is 1 litre.
Weight: 2276g, Height: 37cm, Centre 12cm diam, Base: 9cm diam
CONDITION:
The chromed steel mesh has no corrosion, dents or flaws...looks good!
The chrome plating of neck shows wear (where you hold it when assembling).
There's some surface corrosion of the dispenser mounting thread.
Dispensing head and bulb holder are in good condition: no cracks, no scratches.
The internal rubber seal and plastic siphon are in good condition BUT the bulb seal has failed.
I will Pack and Post to your Australian address. Please advise your Postcode so that I can provide an exact Packed price.
Item is not returnable
- Date Listed:01/02/2023
- Last Edited:21/11/2023
- Condition:Used
- Shipping:Shipping & Pickup
Similar Ads
- SPUTNIK - 🔥- $200 - Made in West Germany - Weather StSPUTNIK - WEATHER STATION Manufactured IN WEST GERMANY VINTAGE ORIGINAL BGM - ENGINEERING COMPANY Makers mark & design number Collectors Item Original design and manufacturing $200 Pick up or postage available$200SHIPPING OFFEREDMirrabooka, WA•22w
- Vintage 1981. Large fruit bowl. Handpainted. Made in KoreaVintage 1981 Large ceramic bowl Handpainted with fruits on inside Colours still vibrant "Made in Korea" stamped on base Made specifically for Woolworths in the USA Measures : Diameter = 27cms Height = 7cms In very good condition for age No cracks, repairs or crazing Pick up Carine Perth Western Australia Listed elsewhere$20Carine, WA•8w
- Vintage 1950s. Bar Waiter decanter. Made in JapanCollectable Vintage 1950's Hard to find this particular Bar Waiter in these colours. Ceramic Hand painted Liquor Decanter Man holding unlidded stein. (This is where the liquor pours out from) Has pipe in mouth Head is the stopper. Stamped "Made in Japan" Stands 20 cms tall 25cms around waist Only used as a decorative bar piece In good condition for age & use No chips, cracks or Some light crazing on yellow shirt section Cork is incomplete & a repair has been made Pick up Carine Perth Western Au$30Carine, WA•12w
- New Vintage Seagull Pewter Bookmark, Made in CanadaBrand new vintage Seagull Pewter Bookmark, made in Canada. Very elegant bookmark , colour dusty pink, grosgrain ribbon with dainty small basket of flowers, in fine pewter. Length 24cm. In original packaging, I purchased in Toronto, Canada in 1990's, stored and never used. Excellent condition. Beautiful gift for booklovers! Reduced $28.00. Can combine with stationery gift sets and other bookmarks, please see other listings.$28SHIPPING OFFEREDYokine, WA•20w
- Old Country Roses - Vintage - Made in EnglandOld Country Roses - vintage - Made in England pieces. 4 x sets of teacups with saucers , sandwich plate and cake plate as well as 2 x sets of teacups with saucers and sandwich plate. 2 cake serving plates and 1 sandwich serving plate. 2 x candle stick holders. $550 the lot$550Stirling, WA•15w
- Vintage hand embroidered doilies. Beautifully made.Vintage hand embroidered doilies. Beautifully made. The largest one is 49cms long and 33cms wide. As new. $15 for both$15SHIPPING OFFEREDInglewood, WA•2w
- Vintage china poodle figurine. Hand painted. Made in Japan. As newVintage china poodle figurine. Hand painted. Made in Japan. As new$25SHIPPING OFFEREDInglewood, WA•2w
- Vintage bowl made in Italy ideal display for centre of tableVintage bowl made in Italy and signed by artist, ideal display for centre of table$10Mount Lawley, WA•74w
- Vintage small silver tea pot and milk jug made in AustraliaVintage small silver tea pot and milk jug made in Australia, sell matching numbered pair for $10$10Mount Lawley, WA•94w
- Vintage Empire Made Bonnie Bride DollVintage Empire Made Bonnie Bride Doll Completely clothed including knickers and shoes etc 24 inches tall Great condition for her age$50Mirrabooka, WA•4d
- Fane LOUDSPEAKER, 15inch model 152/17A, from the 1960s so is VERY RAREOh so rare, 1960’s Fane 15 inch. Model 152/17A Guitar and PA loudspeaker (1960’s HiFi, 30-17,000Hz) 25 Watt RMS 2 inch voice coil, 15 ohm Impedance, Re = 12.1ohm. 17,000 Gauss ceramic magnet Original Pulsonic paper cone, 30 Hz Free Air Resonance, ‘A’ model with HF cone Hammertone Blue, cast aluminium frame. Speaker mounts on 14.67” (373mm) hole centre and opening of 13.5” (343mm) Condition FAIR: Cone has minor blemishes but fully functional, frame is cosmetically poor. Will post to your A$130SHIPPING OFFEREDInnaloo, WA•15w
- INFINITY LOUDSPEAKERS, Components only, from RS-4001, 5001, 6001INFINITY LOUDSPEAKERS, Components only from RS-4001 Speakers: Woofer, POLYSPHERITE Midrange & Crossover (Tweeter not available) RARE and GENUINE!! No longer available from manufacturer. As used in Infinity RS-4001, RS-5001, RS-6001 enclosures. Available as a lot at $150.00 or individually as follows: ITEM 1: $40 Infinity IMG 200mm Woofer, new surround, Infinity part number 902-4165 6 ohm impedance (Re 3.7 ohm) ITEM 2: $90 Infinity Mid-range speaker, Polyspherite, Infinity part number 902-4$150SHIPPING OFFEREDInnaloo, WA•15w
- PLESSY ROLA 1970s 12U50 50W ALNICO PAIR BASS & GUITAR LOUDSPEAKERSPair of 1970's PLESSEY ROLA 12U50 speakers 50 Watt RMS, 8 ohm (Re 6.7 and 6.8 ohms). ALNICO magnets 65Hz resonance For guitar, especially bass rigs (F19 black cones, see loudspeaker frame pics) Good condition. The pictures form part of the description of condition. One speaker has minor repair to cone. They are NOT returnable. If you would like more information, please ask. PAIR for $130 but available singly at $80 each. Will pack and post to your Australian address. Please advise your PostCo$130SHIPPING OFFEREDInnaloo, WA•15w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here