2177 views
SELF-BUILD KIT Joey Pram Dinghy Row/Motor Version LITE kit inc plans
$300 Negotiable
Authorised Lite Kit for the Joey Wooden Dinghy from Boatcraft Pacific. Includes plans plus plywood components required to build a stitch and glue Boatcraft Pacific "Joey" row/sail dinghy. Epoxy, paint etc can be purchased separately from Boatcraft Pacific agents.
Pick-up only, from Ivanhoe, Vic.
Cut from 4mm BBA grade plywood. I have built this exact model boat and used it for 10 years as a tender and for pleasure. It is a great design - quick, stable, robust. Has a great payload capacity of 250-300kg.
Note: Picture of completed boat is for illustration purposes - only the ply panel kit is for sale. To complete this kit you will need (approx prices and quantities based on personal experience):
> Plans $88 - Essential! Buy direct from Boatcraft Pacific - get the extra transom kit if you can but if not I will supply 2 of 4mm blanks so you can cut it out and laminate it yourself - simple job.
> 4m Oregon or Hoop Pine 20x20 for
Cleats and bottom centre rubbing strake $50?
> 1m of 120mm x 20mm Hoop Pine for skeg $20?
> 2.4m of 3mm x 25mm brass strip $25?
> 6-9L of BoteCote epoxy depending on how good/heavy you want it $245 - $400
> 400gm Fillet/Glue Powder $26
> 6-7m of 200gsm x 1400mm plain weave fibre glass cloth (bottom inner/outer, topsides outer and row lock gudgeon area reinforcing (200mm x 200mm) $85?
> 2 of 30mm x 5mm Tas Oak Porta round edge strap for outer gunwale $34
> 2 of 30mm x 5mm clear pine round edge strap for inner gunwale $31
> 2L Aquacote High-Build undercoat (this is important!) $106
> 1L Aquacote or similar single pack top coat, row lock set and oars. $111?
> 200 of 2.8mm x 100mm black cable ties $10?
> scrap ply or mdf 400 x 1000 for Support v-frame and same for inner temporary frame.
> Scrap 35 x 75 pine 1 or 2m for Support frame.
That should do it for a rowing version!
Pick-up only, from Ivanhoe, Vic.
Cut from 4mm BBA grade plywood. I have built this exact model boat and used it for 10 years as a tender and for pleasure. It is a great design - quick, stable, robust. Has a great payload capacity of 250-300kg.
Note: Picture of completed boat is for illustration purposes - only the ply panel kit is for sale. To complete this kit you will need (approx prices and quantities based on personal experience):
> Plans $88 - Essential! Buy direct from Boatcraft Pacific - get the extra transom kit if you can but if not I will supply 2 of 4mm blanks so you can cut it out and laminate it yourself - simple job.
> 4m Oregon or Hoop Pine 20x20 for
Cleats and bottom centre rubbing strake $50?
> 1m of 120mm x 20mm Hoop Pine for skeg $20?
> 2.4m of 3mm x 25mm brass strip $25?
> 6-9L of BoteCote epoxy depending on how good/heavy you want it $245 - $400
> 400gm Fillet/Glue Powder $26
> 6-7m of 200gsm x 1400mm plain weave fibre glass cloth (bottom inner/outer, topsides outer and row lock gudgeon area reinforcing (200mm x 200mm) $85?
> 2 of 30mm x 5mm Tas Oak Porta round edge strap for outer gunwale $34
> 2 of 30mm x 5mm clear pine round edge strap for inner gunwale $31
> 2L Aquacote High-Build undercoat (this is important!) $106
> 1L Aquacote or similar single pack top coat, row lock set and oars. $111?
> 200 of 2.8mm x 100mm black cable ties $10?
> scrap ply or mdf 400 x 1000 for Support v-frame and same for inner temporary frame.
> Scrap 35 x 75 pine 1 or 2m for Support frame.
That should do it for a rowing version!
- Date Listed:31/01/2023
- Last Edited:26/04/2024
- Listing Type:Private seller
- Length (ft):8
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8654