298 views
Chevy Chev Bellhousing GMC Truck and Pickup
$350
Chevy Chev Bellhousing for GMC Truck and Chevrolet full size pickups.
Also known as a '5 bolt bell housing'.
Suitable for Muncie or Saginaw 4 speed gearbox with an adapter ring fitted. The ring would have been factory fitted if it was intended to be used for a 4 speed Muncie or Saginaw gear box.
Made for GM factory New Process NP440 3 speed overdrive manual transmission (gearbox) fitted to Chevy 6.2 liter diesel engines and using a 12" clutch.
In excellent condition, no cracks or repairs, fitted with fork pivot.
GM cast number ****1655
Depth 6.30", bearing retainer opening diameter 5.125"
$350.00
Ad removed when sold. If the ad is up then the bell housing is available.
Also known as a '5 bolt bell housing'.
Suitable for Muncie or Saginaw 4 speed gearbox with an adapter ring fitted. The ring would have been factory fitted if it was intended to be used for a 4 speed Muncie or Saginaw gear box.
Made for GM factory New Process NP440 3 speed overdrive manual transmission (gearbox) fitted to Chevy 6.2 liter diesel engines and using a 12" clutch.
In excellent condition, no cracks or repairs, fitted with fork pivot.
GM cast number ****1655
Depth 6.30", bearing retainer opening diameter 5.125"
$350.00
Ad removed when sold. If the ad is up then the bell housing is available.
- Date Listed:10/08/2022
- Last Edited:07/03/2024
- Condition:Used
- Warranty:No
Similar Ads
- TOYOTA D series TRUCK CHASSIS & BODY WORKSHOP SERVICE MANUALS c70/802x Genuine Repair Manual for a Toyota D series Truck the c1970 in good clean condition apart from the covers a bit scuffed, the 1980 ( doesn't say model )very good condition 36 mm total thickness, total Wt 1.68 Kgs can arrange delivery PS I also have both petrol and diesel engines if interested$100Dianella, WA•71w
- EUCLID R60 DUMP TRUCK WORKSHOP MANUAL PLUS OPERATORS MANUALGenuine Oeration plus Shop Manual for a Euclid R60 Dump Truck, in very good clean condition, I can arrange delivery$200Dianella, WA•28w
- STERLING L-LINE & A-LINE TRUCK INSTRUCTION MANUAL c2000Instruction Manual for a c2000 Sterling truck, in good clean condition,but the cover's are scuffed, I can arrange delivery$45Dianella, WA•6w
- TRUCK SCREW ON DIESEL FILLER CAPScrew on cap for a Truck diesel tank OD around 76mm, ID around 73mm thread pitch around 4.5 mm , looks in good condition, I can arrange delivery$40Dianella, WA•23w
- VOLVO FM TRUCK INSTRUCTION MANUAL WARRANTY SERVICE RECORDS ETC c2016Instruction manual and other booklets for a Volvo FM truck c2016, all in good clean condition, I can arrange delivery$60Dianella, WA•6w
- CLAYTON TRUCK ENGINE COMPRESSOR OVERHAUL KITThought to be new old stock Repair kit for a Clayton Dewandre Truck compressor say''s Perkins on the rings but they fitted them to lots of Engine makes , The cylinder has light suface rust, I think it will be ok, looks like the Pt No is GA28416?--I can arrange delivery$80Dianella, WA•80w
- Truck & Trailer Steel Rims - 10 Stud10 stud truck & trailer rims - 335mm (Euro) 9 steel rims - $30 ea 1 x Alloy rim - $60$20Balcatta, WA•22w
- CATERPILLAR 3208 DIESEL TRUCK ENGINE OPERATIONS MAINT MANUAL 1980Operations Maintence manual for a Caterpillar 3208 Diesel Truck Engine c1980, in good clean condition, can arrange delivery$45Dianella, WA•450w
- LEYLAND COMET TRUCK WORKSHOP MANUAL /w 300 eng'Service Manual for a Leyland Comet Truck, not sure of the year has a 300 Diesel engine, well worn might have hard covers at one time can arrange delivery$60Dianella, WA•328w
- EATON TRUCK AXLES EA-104 SERVICE MANUALService Manual for EA-104 Eaton Truck Axles in very good clean conditrion, can arrange delivery$45Dianella, WA•246w
- Holden HK HT HG Tail Shaft Powerglide to Ford 9 inchHolden HK HT HG Tail Shaft / Drive Shaft Power glide to 9 inch Ford diff This is a new drive shaft and it has never been used. As shown in the pictures manufactured by Hardy Spicer Belmont 40 years ago. Drive shaft has been in storage since. Shaft dimensions as follows : Length : Center uni to center uni 1425mm Diameter : 76.3mm (3.00") Cap diameter : 25.6mm Uni width : 81mm Yoke : To suit powerglide transmission. Pick up only. $450.00 Ad removed when sold. If the ad is up then the shaft is ava$450Karrinyup, WA•2d
- Ford Falcon Alloy Tail Shaft / Drive ShaftFord Falcon Alloy (Aluminum) Tail shaft/Drive Shaft with yoke and universals. This is a New Old Stock (NOS) OEM shaft and it has never been used. Part number as shown in the pictures 90DA-4602-SA and 917494-5404 Shaft dimensions as follows : Length : Center uni to center uni 1480mm Diameter : 82.6mm (3.250") Cap diameter : 27.6mm Uni width : 80mm Yoke OD : 38mm I am not familiar with ford parts and I do not know what model it suits or if it is auto or manual. Please do your own homework. Pick u$280Karrinyup, WA•2d
- MSD Crank Trigger 7 inch Small Block ChevMSD small block chev/chevy crank trigger kit. New old stock (NOS) 7 inch trigger wheel. Still in sealed package. Never used. MSD part number 8515 $350.00 Ad removed when sold. If the ad up then the kit is available$350Karrinyup, WA•4d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8618