105 views
Toyota Hilux n70 cv joint GSP shaft
$50 Negotiable
GSP CV for Toyota Hilux N70
Good condition cv, needs 1 x re boot. Only removed as had hoped in boot a year or so ago. Kept as a spare and always intended on getting g the boots done to use full time. Never happened and now having a shed clean out.
This was in a 2008 Toyota Hilux dual cab. Should fit any Hilux from******2011/12 I believe.
Part numbers on the box and purchased through Bursons. Please feel free to contact them with numbers to confirm fitment.
Please contact via txt or message here for any questions or queries.
Cheers
Good condition cv, needs 1 x re boot. Only removed as had hoped in boot a year or so ago. Kept as a spare and always intended on getting g the boots done to use full time. Never happened and now having a shed clean out.
This was in a 2008 Toyota Hilux dual cab. Should fit any Hilux from******2011/12 I believe.
Part numbers on the box and purchased through Bursons. Please feel free to contact them with numbers to confirm fitment.
Please contact via txt or message here for any questions or queries.
Cheers
- Date Listed:27/10/2023
- Last Edited:04/11/2023
- Condition:Used
- Model:Hilux
- Make:Toyota
Similar Ads
- Hilux gearbox semi reco N70 KUN26Hilux gearbox no transfer semi reco parts replaced as required ie if required new input shaft layshaft bearings syncros etc full custom reco version available on request price adjustment will apply guided by your requirements fitting available by arrangement Beerwah area or miles district $750 plus oils etc sold exchange also new clutch can be arranged and fitted at the same time if required call me for a chat transport can be arranged ex Brisbane Lee$1,750Brisbane City, QLD•1w
- Mercedes-Benz W204 C63 Left Hand Rear Drive Shaft CVThis is a genuine Mercedes-Benz W204 C63 Left Hand Rear Drive Shaft CV. This product may contain defects please view images carefully as this is a USED item in USED condition. All Parts sold are in USED condition unless stated otherwise, please view all photos carefully for any slight defects. We do not accept refunds or product returns, once it's yours, it's yours. We can ship to you at a fee depending on your location from our warehouse, also keep in mind that some products/items are heav$100Seventeen Mile Rocks, QLD•182w
- Daihatsu vehicle parts newI have a range of new old stock of Daihatsu mechanical & service parts to clear, consisting of; Timing Belts- Charade, Applause, Terios, Feroza, Handivan Distributor Cap- Charade 3 cyl. 84-94 Head Gaskets- Charade 3 cyl. 88-98 Manifold Gaskets- Charade 3 cyl inlet & exhaust 78-98 Tappet Cover Gasket- suit 1.3 & 1.6 motors 88-2000 Oil, Air & fuel filters- Charade, Applause, Terios, Feroza, Pyzar, Delta, Rocky Fan Belts- most models Clutch throwout bearing- Rocky, Delta,NegotiableRichlands, QLD•99w
- CENTURY BATTERY ULTRA HI PERFORANCE N70ZZLX MF 30mths WARRANTY 810CCACENTURY ULTRA HI PERFORMANCE BATTERY N70ZZ OR N70ZZL STARTING BATTERY BRAND NEW LISTING IS FOR 1 BATTERY EITHER LEFT OR RIGHT HAND POSITIVE (SAME CASING SIZE AS 95D31R/L) THIS BATTERY IS SUITABLE FOR STARTING (CRANKING) AND IS SUITABLE FOR TOYOTA LANDCRUISER HILUX PRADO AND OTHER 4X4 VEHICLES LIKE FORD, HOLDEN, NISSAN, MITSUBISHI AND MAZDA PLEASE CONTACT US IF YOU NEED TO CONFIRM IT WILL BE SUITABLE FOR YOUR VEHICLE 30 MONTHS WARRANTY FOR P$259Wynnum, QLD•92w
- Ve ss commodore differentialVe commodore limited slip diff and new drive shafts. Used LSD , new CV shafts. Bought for commodore but never used. Pickup Brisbane Northside$1,200Dayboro, QLD•27w
- *****2019 MERCEDES BENZ Cla250 Front RH CV Axle Shaft 2463309300This product contains defects please view images carefully as this is a USED item in USED condition. All Parts sold are in USED condition unless stated otherwise, please view all photos carefully for any slight defects as they form part of the description. If you are unsure if this part is correct for you, or if you are unsure of the condition of this item please contact us before completing your purchasing.$250Seventeen Mile Rocks, QLD•184w
- FX 48-215 FJ FC FB EK EJ EH HR HOLDEN NASCO ACCESSORY TAIL SHAFTVINTAGE " HARDY SPICER " GREY ENGINE TAILSHAFT YOKE. Any one familer with Hardy Spicer would know they made strong racing yokes and universal joints that were used in OLD HUMPY RACING. HARDY SPRICER is still around today..... This is a NEW OLD STOCK HARDY SPICER YOKE FOR A GREY ENGIEN. Very hard to find these parts today. the yoke casting is alot stronger then stock ones. HARDY SPRICE Universal joints were also made larger and stronger with grease nipples on them unlike stock ones or othe$295Brisbane City, QLD•47w
- Radiator 4 Cylinder Fits Toyota Camry CV36******2006 NEWRadiator to suit Toyota Camry CV36 8/2002 - 6/2006 4 Cylinder Radiator has oil cooler for the automatic transmission, if you have a manual you don't need to worry about the oil cooler as it is a sealed unit To suit sedan models Brand new non genuine direct replacement radiator Comes with 12 months warranty.$185Slacks Creek, QLD•261w
- HILUX CRANK SHAFT SUIT 1KZHILUX CRANKSHAFT OUT OF 1KZ 3.0 LTRE TURBO DIESEL IN GOOD CONDITION$150NegotiableTingalpa, QLD•66w
- Hilux gearbox semi reco 97 onwards LN167Hilux gearbox LN167 reconditioned with parts as required ie if required new bearings new cluster shaft seals input shaft etc customised full reco available by request price adjustment will apply based on your requirements With warranty sold exchange fitting available beerwah or miles district by arrangement also other models available as well as clutch kits and repairs can arrange transport ex Brisbane call Lee$1,550Brisbane City, QLD•1w
- Have pallet racking cross braces. Selling cross braces onlyHave pallet racking cross braces. Selling cross braces only, no uprights unfortunately, Have about 70 of these available, happy to arrange delivery within negotiation. Presents in great condition, no buckles or dints. Some light paint fade due to current storage as moving shed. Would like to sell as a lot, am open to separating bundles of cross braces. Please contact via txt or message here on app due to my work and work hours.$2,500NegotiablePlainland, QLD•1w
- Stanley fat max extreme tool caddy.Selling Stanley fat max extreme tool caddy No longer in use and clearing out the shed. Chasing $45 negotiable. Please contact via txt or message here on gumtree due to my work and work hours.$45NegotiableKedron, QLD•14w
- Makita tool belt pouchSelling Makita tool belt pouch, no longer wanted or needed. Been sitting in the shed and having a clean out. Chasing $35 negotiable. Welcome to inspect. Please contact via txt or message here due to my work and work hours.$35NegotiableKedron, QLD•14w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 0860