996 views
Breaker Boom System B125
$16,500
Up for sale is our Breaker Boom System.
Hooks up to a mobile crusher
Some specs are:
HAMMER BR321 built-in
HYDRAULIC POWER SUPPLY From the hydraulic system of the mobile crusher (20 - 30 l / min; 150 bar)
PEDESTAL
Structure Welded steel plate structure
Slew Single king pin slew pillar
Pin diameter 60 mm
Boom swing One double acting slew cylinder with self aligning bearings Slew angle 95°
LINK BOOM SYSTEM
Structure Welded steel square pipe structure
120 x 120 mm section
Main boom Length 1250 mm
Hammer mounting Special hammer side plates
Pins Heat treated multi alloy steel pins
Bushings Special bronze bushings with grease depots
Cylinders Double acting cylinders with self-aligning bearings
Max. pressure 25,0 MPa
Dimensions Piston/Rod-Stroke (mm)
Hoist 80/45-200
Hammer tilt 80/45-200
Swing 80/45-200
BOOM WEIGHT 485 kg (including hammer)
HYDRAULIC LIFTING FORCE 5,4 kN
CONTROL SYSTEM
Control valve 3 proportional sections for boom movements
1 on/off section for the hammer
Standard controls Four mechanical control levers on the main control valve
Main control valve in the control stand with 6 m hoses to the power pack
Optional remote controls
EHC (electro-hydraulic)
RC (radio)
Hooks up to a mobile crusher
Some specs are:
HAMMER BR321 built-in
HYDRAULIC POWER SUPPLY From the hydraulic system of the mobile crusher (20 - 30 l / min; 150 bar)
PEDESTAL
Structure Welded steel plate structure
Slew Single king pin slew pillar
Pin diameter 60 mm
Boom swing One double acting slew cylinder with self aligning bearings Slew angle 95°
LINK BOOM SYSTEM
Structure Welded steel square pipe structure
120 x 120 mm section
Main boom Length 1250 mm
Hammer mounting Special hammer side plates
Pins Heat treated multi alloy steel pins
Bushings Special bronze bushings with grease depots
Cylinders Double acting cylinders with self-aligning bearings
Max. pressure 25,0 MPa
Dimensions Piston/Rod-Stroke (mm)
Hoist 80/45-200
Hammer tilt 80/45-200
Swing 80/45-200
BOOM WEIGHT 485 kg (including hammer)
HYDRAULIC LIFTING FORCE 5,4 kN
CONTROL SYSTEM
Control valve 3 proportional sections for boom movements
1 on/off section for the hammer
Standard controls Four mechanical control levers on the main control valve
Main control valve in the control stand with 6 m hoses to the power pack
Optional remote controls
EHC (electro-hydraulic)
RC (radio)
- Date Listed:Yesterday
- Last Edited:Yesterday
- Listing Type:Dealer new
Similar Ads
- Kubota KX018-4 Mini Excavator
- 2 hr
Source Machinery Based in Perth Western Australia are an official Construction Dealer for Kubota Australia KX018-4 1.7 TONNE Setting the benchmark for mini excavators, the premium Kubota KX018-4 is engineered to handle the heaviest of loads in the tightest of places.With a roomy operators area, the Kubota KX018-4 is jam packed with features to increase productivity and comfort. Powered by a reliable Kubota 17HP engine, experience powerful digging force and a wider working range then ever$1NegotiableKewdale, WA•2d - WCM932H Wheel loader, 8ton, 100HP Cummins, 4M dumping height, 4 speedWCM is proud to further upgrade this 8ton wheel loader, designed and manufactured by WCM, with our knowhow on wheel loaders, with 100HP 4BT Cummins, 4F/4R gear shift, auto bucket levelling, bucket floating, boom lift limit, it is high standard machine ideal for commercial business yard, builders, landscaping contractors, and high grade loader for all heavy farming job. Main spec: - Operating weight 7460kgs, rated load 2.5ton - Dimension : L6310*W2020*H3030 mm - Dumping height: 4000mm wh$59,990Maddington, WA•2h
- Brand new FL936H 11Ton Wheel Loader Quick hitch Bucket & Forks
- 0 hr
WCM FL936H wheel loader, a very reliable high quality wheel loader which customers giving high comments and refer to friends. Operation Weight: 11 Ton, Designed and built at hight standard, MINE SPECS available, latest version with 2cubic meter GP bucket with bolted on double side wearing cutting edge, 3.5Ton pallet fork. Built for heavy or tough job. Engine: Weichai (Deutz) Engine, 125HP Transmission: Power Shift. 4F/2R. Very reliable and easy maintain. Hydraulic Load-Sensing Steering$79,900Maddington, WA•2h - rock breakerRock breaker, South Korean JSC [Jisung] brand, JSB50S . Operating weight 880 kgs to suit 11 to 18 tonne class excavator. This demo breaker on special and price includes:- GST Headplate Standard Hoses Tooling box.$17,300Lesmurdie, WA•87w
- Rammer S27 Rock breakerThis rock breaker is in good condition and comes with 2 new spare chisels and spare Bush and seal kit at an approximate value of $4000.00 . Has been used on a 14T excavator , Has plug in GPS diagnostics Optional head bracket to suit 14T Volvo/Hyundai $750.00$12,500NegotiableForrestdale, WA•1d
- 2009 HAULOTTE HA120PX
- 397 hr
Z-Boom Haulotte HA120PX 2009 397 hours Ex-govt 12m Diesel. 5.6 tonne. Very clean machine.$34,000Malaga, WA•1d - PROMOTION!! Sunward SWE18UF 1.8T Excavator,3 buckets, QH & hammer pipe,Yanmar
- 0 hr
On promotion sales!! Your time to buy one of best quality excavator, with Kubota diesel, Cassapa Pump, quick hitch,3 buckets with hammer pipe, and hydraulic quick hitch pipe, expandable track, easy service.... in Australia for 16 years with high value from customers. Sunward SWE18UF, Zero tail Swing Operation weight: 1880kgs 18HP Kubota Engine Cassapa hydraulic Pump Manual quick hitch (standard), (hydraulic QH is available) 3 buckets: 260mm, 380mm, 1000mm mud bucket. Expandable rubber track,$30,800Maddington, WA•2d - Mustang 2012 mini skid steer yanmar diesel
- 1500 hr
Welcome to Ol’ Mate Equipment Visit www.olmateequipment.com.au for all available equipment ————————————————————— Available in stock 2012 mustang 2012 4 wheel loader skid steer yanmar diesel made in USA $20,000 plus GST , $22,000 price including GST 1500 run hours Yanmar 3TNV82A, 24HP, 3 cylinder diesel engine Rake bucket and GP bucket Foot and hand throttle Left joystick for drive operation, right joystick bucket and boom operation Auxiliary hydraulics Near new tyres Length - 2580mm$20,000Oldbury, WA•8w - Armoursafe Crane Outrigger Pads (Brand new item)Create a safe and sturdy surface area for outrigger supports with our tough and durable Armoursafe Crane Outrigger Pads. Available in 3 sizes: 400 x 400 x 50mm (12 tonne) $143 each 500 x 500 x 40mm (15 Tonne) $187 each 600 x 600 x 40mm (21 Tonne) $258.50 each Built to withstand the harshest conditions, resistant to oils & chemicals, Armoursafe Crane Pads are used for cranes, Farm Vehicles, EWP’s, hiab crane trucks, concrete boom pumps, Container Side-loader trucks and other site machin$143Canning Vale, WA•35w
- UHI Excavators Package Price From $10990 includes multiple practical attachmentsUHI Excavators Package Price From $10990 includes multiple practical attachments 🌟 UME10T - 10hp KOOP Engine Mini Excavator with Swing Boom Engine Power: 10 hp Koop Engine Operating Weight: 1000 kg Dig Depth: 1580 mm Package Price: 10,990 inc GST Including Free 9 Attachments ----------------------------------------------------------------------------------- 🌟 UME10P - 10Hp Koop Engine Mini Excavator with Swing Boom Engine Power: 10 hp Koop Engine Operating Weight: 1000 kg Dig Depth: 1580 mm$10,990Landsdale, WA•2h
- 5 Finger Rotating Multi Grapple / Grab to suit 6-10T excavatorNEW DHRS04 Daehan Rotating Multi Grapple. -Weight 450kg -Jaw opening 1400mm -Operating pressure 140-160 bar -Required Oil Flow 190-280 lpm -Closing force 28t -Carrier 6-10t https://www.totalrockbreaking.com.au/construction/daehan/rotating-multi-grapples.html **Sizes to suit a full range carrier weights are also available. Prices include GST Total Rockbreaking Solutions (TRS) are based in Kewdale, offering a full range of excavator and skid steer attachments and specialty products for demandi$15,432Kewdale, WA•21h
- 5 Finger Rotating Multi Grapple / Grab to suit 4-5T excavatorNEW DHRS03 Daehan Rotating Multi Grapple. -Weight 370kg -Jaw opening 1300mm -Operating pressure 170-250 bar -Required Oil Flow 40-60 lpm -Closing force 22t -Carrier 4-5t https://www.totalrockbreaking.com.au/construction/daehan/rotating-multi-grapples.html **Sizes to suit a full range carrier weights are also available. Prices include GST Total Rockbreaking Solutions (TRS) are based in Kewdale, offering a full range of excavator and skid steer attachments and specialty products for demanding$13,264Kewdale, WA•21h
- New Tefra Hydraulic Quick Hitch to suit Komatsu PC138Up for sale is a New Tefra hitch to suit a Komatsu PC138. Special Price of $4125inc gst per PC138 Hitch while stock lasts. Excavator machine dimensions that the hitch will suit are: 60mm Pins 260mm Width 375mm Centers Hitch Pick ups are: 60mm Pins 218mm Width Pick up centers 345mm to 435mm Some of the features are: Front/Rear Hooks - Primary locking system Positive Secondary locking system Smart valve-Ensures release in safe position only Manufactured in Ireland, Tefra has been produci$3,850Kewdale, WA•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 6237
Trading hours:
- Sat: Closed